docs: hwmon: convert remaining files to ReST format

[mirror_ubuntu-jammy-kernel.git] / Documentation / hwmon / amc6821

diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821
index ced8359c50f8f898687d1ff98571f4af82343b3c..d10eabcbc0f3673582eecb5edcf0eb25ee0a1980 100644 (file)
--- a/Documentation/hwmon/amc6821
+++ b/Documentation/hwmon/amc6821
@@ -2,9 +2,13 @@ Kernel driver amc6821
 =====================
 
 Supported chips:
+
        Texas Instruments AMC6821
+
        Prefix: 'amc6821'
+
        Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
+
        Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
 
 Authors:
@@ -21,10 +25,11 @@ The pwm can be controlled either from software or automatically.
 
 The driver provides the following sensor accesses in sysfs:
 
+======================= ==      ===============================================
 temp1_input            ro      on-chip temperature
 temp1_min              rw      "
 temp1_max              rw      "
-temp1_crit             rw      "
+temp1_crit             rw      "
 temp1_min_alarm                ro      "
 temp1_max_alarm                ro      "
 temp1_crit_alarm       ro      "
@@ -32,16 +37,16 @@ temp1_crit_alarm    ro      "
 temp2_input            ro      remote temperature
 temp2_min              rw      "
 temp2_max              rw      "
-temp2_crit             rw      "
+temp2_crit             rw      "
 temp2_min_alarm                ro      "
 temp2_max_alarm                ro      "
 temp2_crit_alarm       ro      "
 temp2_fault            ro      "
 
-fan1_input             ro      tachometer speed
+fan1_input             ro      tachometer speed
 fan1_min               rw      "
 fan1_max               rw      "
-fan1_fault             ro      "
+fan1_fault             ro      "
 fan1_div               rw      Fan divisor can be either 2 or 4.
 
 pwm1                   rw      pwm1
@@ -87,6 +92,7 @@ temp2_auto_point3_temp        rw      Above this temperature fan runs at maximum
                                values which depend on temp2_auto_point2_temp
                                and pwm1_auto_point2_pwm. Read it out after
                                writing to get actual value.
+======================= ==      ===============================================
 
 
 Module parameters
@@ -97,6 +103,7 @@ load the module with: init=0.
 
 If your board BIOS doesn't initialize the chip, or you want
 different settings, you can set the following parameters:
-init=1,
-pwminv: 0 default pwm output, 1 inverts pwm output.
+
+- init=1,
+- pwminv: 0 default pwm output, 1 inverts pwm output.