docs: hwmon: convert remaining files to ReST format

[mirror_ubuntu-jammy-kernel.git] / Documentation / hwmon / ltc4151

diff --git a/Documentation/hwmon/ltc4151 b/Documentation/hwmon/ltc4151
index 43c667e6677a82f424073c840c76aa88713348b6..c39229b196245dc317058529fedbf446c515e10d 100644 (file)
--- a/Documentation/hwmon/ltc4151
+++ b/Documentation/hwmon/ltc4151
@@ -2,11 +2,16 @@ Kernel driver ltc4151
 =====================
 
 Supported chips:
+
   * Linear Technology LTC4151
+
     Prefix: 'ltc4151'
+
     Addresses scanned: -
+
     Datasheet:
-        http://www.linear.com/docs/Datasheet/4151fc.pdf
+
+       http://www.linear.com/docs/Datasheet/4151fc.pdf
 
 Author: Per Dalen <per.dalen@appeartv.com>
 
@@ -25,9 +30,10 @@ which can be safely used to identify the chip. You will have to instantiate
 the devices explicitly.
 
 Example: the following will load the driver for an LTC4151 at address 0x6f
-on I2C bus #0:
-# modprobe ltc4151
-# echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device
+on I2C bus #0::
+
+       # modprobe ltc4151
+       # echo ltc4151 0x6f > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries
@@ -40,8 +46,10 @@ Current reading provided by this driver is reported as obtained from the Current
 Sense register. The reported value assumes that a 1 mOhm sense resistor is
 installed.
 
+======================= ==================
 in1_input              VDIN voltage (mV)
 
 in2_input              ADIN voltage (mV)
 
 curr1_input            SENSE current (mA)
+======================= ==================