net: phy: rename PHY_IGNORE_INTERRUPT to PHY_MAC_INTERRUPT

[mirror_ubuntu-hirsute-kernel.git] / Documentation / networking / phy.rst

diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index b2f7ec794bc8b6cd3164c3016718474fc8b43756..23c70948a152a11ef67a78fa546ef552a5cb4fef 100644 (file)
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -216,7 +216,7 @@ put into an unsupported state.
 Lastly, once the controller is ready to handle network traffic, you call
 phy_start(phydev).  This tells the PAL that you are ready, and configures the
 PHY to connect to the network. If the MAC interrupt of your network driver
-also handles PHY status changes, just set phydev->irq to PHY_IGNORE_INTERRUPT
+also handles PHY status changes, just set phydev->irq to PHY_MAC_INTERRUPT
 before you call phy_start and use phy_mac_interrupt() from the network
 driver. If you don't want to use interrupts, set phydev->irq to PHY_POLL.
 phy_start() enables the PHY interrupts (if applicable) and starts the