http://github.com/open-power/capiflash
-CXL Flash Driver IOCTLs
-=======================
+CXL Flash Driver LUN IOCTLs
+===========================
Users, such as the block library, that wish to interface with a flash
device (LUN) via user space access need to use the services provided
resource handle that is provided is already referencing provisioned
storage. This is reflected by the last LBA being a non-zero value.
+ When a LUN is accessible from more than one port, this ioctl will
+ return with the DK_CXLFLASH_ALL_PORTS_ACTIVE return flag set. This
+ provides the user with a hint that I/O can be retried in the event
+ of an I/O error as the LUN can be reached over multiple paths.
+
DK_CXLFLASH_VLUN_RESIZE
-----------------------
This ioctl is responsible for resizing a previously created virtual
operating in the virtual mode and used to program a LUN translation
table that the AFU references when provided with a resource handle.
+ This ioctl can return -EAGAIN if an AFU sync operation takes too long.
+ In addition to returning a failure to user, cxlflash will also schedule
+ an asynchronous AFU reset. Should the user choose to retry the operation,
+ it is expected to succeed. If this ioctl fails with -EAGAIN, the user
+ can either retry the operation or treat it as a failure.
+
DK_CXLFLASH_RELEASE
-------------------
This ioctl is responsible for releasing a previously obtained
clone. This is to avoid a stale entry in the file descriptor table of the
child process.
+ This ioctl can return -EAGAIN if an AFU sync operation takes too long.
+ In addition to returning a failure to user, cxlflash will also schedule
+ an asynchronous AFU reset. Should the user choose to retry the operation,
+ it is expected to succeed. If this ioctl fails with -EAGAIN, the user
+ can either retry the operation or treat it as a failure.
+
DK_CXLFLASH_VERIFY
------------------
This ioctl is used to detect various changes such as the capacity of
exclusive user space access (superpipe). In case a LUN is visible
across multiple ports and adapters, this ioctl is used to uniquely
identify each LUN by its World Wide Node Name (WWNN).
+
+
+CXL Flash Driver Host IOCTLs
+============================
+
+ Each host adapter instance that is supported by the cxlflash driver
+ has a special character device associated with it to enable a set of
+ host management function. These character devices are hosted in a
+ class dedicated for cxlflash and can be accessed via /dev/cxlflash/*.
+
+ Applications can be written to perform various functions using the
+ host ioctl APIs below.
+
+ The structure definitions for these IOCTLs are available in:
+ uapi/scsi/cxlflash_ioctl.h
+
+HT_CXLFLASH_LUN_PROVISION
+-------------------------
+ This ioctl is used to create and delete persistent LUNs on cxlflash
+ devices that lack an external LUN management interface. It is only
+ valid when used with AFUs that support the LUN provision capability.
+
+ When sufficient space is available, LUNs can be created by specifying
+ the target port to host the LUN and a desired size in 4K blocks. Upon
+ success, the LUN ID and WWID of the created LUN will be returned and
+ the SCSI bus can be scanned to detect the change in LUN topology. Note
+ that partial allocations are not supported. Should a creation fail due
+ to a space issue, the target port can be queried for its current LUN
+ geometry.
+
+ To remove a LUN, the device must first be disassociated from the Linux
+ SCSI subsystem. The LUN deletion can then be initiated by specifying a
+ target port and LUN ID. Upon success, the LUN geometry associated with
+ the port will be updated to reflect new number of provisioned LUNs and
+ available capacity.
+
+ To query the LUN geometry of a port, the target port is specified and
+ upon success, the following information is presented:
+
+ - Maximum number of provisioned LUNs allowed for the port
+ - Current number of provisioned LUNs for the port
+ - Maximum total capacity of provisioned LUNs for the port (4K blocks)
+ - Current total capacity of provisioned LUNs for the port (4K blocks)
+
+ With this information, the number of available LUNs and capacity can be
+ can be calculated.
+
+HT_CXLFLASH_AFU_DEBUG
+---------------------
+ This ioctl is used to debug AFUs by supporting a command pass-through
+ interface. It is only valid when used with AFUs that support the AFU
+ debug capability.
+
+ With exception of buffer management, AFU debug commands are opaque to
+ cxlflash and treated as pass-through. For debug commands that do require
+ data transfer, the user supplies an adequately sized data buffer and must
+ specify the data transfer direction with respect to the host. There is a
+ maximum transfer size of 256K imposed. Note that partial read completions
+ are not supported - when errors are experienced with a host read data
+ transfer, the data buffer is not copied back to the user.
projects / mirror_ubuntu-zesty-kernel.git / blobdiff