ARM: dts: am43xx-clocks: use ti, fixed-factor-clock for dpll_per_clkdcoldo

[mirror_ubuntu-artful-kernel.git] / arch / arm / boot / dts / omap3-sbc-t3730.dts

diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index c119bd545053a51ee1d954a98e5f62ca5a825990..08e4a7086f2293c8b0343eeed752b48e477e37a9 100644 (file)
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -10,21 +10,18 @@
        compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
 };
 
-&gpmc {
-       ranges = <5 0 0x2c000000 0x01000000>,
-                <4 0 0x2d000000 0x01000000>;
-};
-
-&smsc2 {
+&omap3_pmx_core {
        pinctrl-names = "default";
-       pinctrl-0 = <&smsc2_pins>;
-};
+       pinctrl-0 = <&sb_t35_usb_hub_pins>;
 
-&omap3_pmx_core {
-       smsc2_pins: pinmux_smsc2_pins {
+       sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
                pinctrl-single,pins = <
-                       0x86 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_ncs4.gpmc_ncs4 */
-                       0xa2 (PIN_INPUT_PULLUP | MUX_MODE4)     /* gpmc_wait3.gpio_65 */
+                       OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
                >;
        };
-};
\ No newline at end of file
+};
+
+&gpmc {
+       ranges = <5 0 0x2c000000 0x01000000>,
+                <4 0 0x2d000000 0x01000000>;
+};