#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/mfd/da903x.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static struct regulator *em_x270_sdio_ldo;
+static struct gpiod_lookup_table em_x270_mci_wp_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Write protect on GPIO 95 */
+ GPIO_LOOKUP("gpio-pxa", GPIO95_MMC_WP, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
goto err_irq;
}
- if (machine_is_em_x270()) {
- err = gpio_request(GPIO95_MMC_WP, "MMC WP");
- if (err) {
- dev_err(dev, "can't request MMC write protect: %d\n",
- err);
- goto err_gpio_wp;
- }
- gpio_direction_input(GPIO95_MMC_WP);
- } else {
+ if (!machine_is_em_x270()) {
err = gpio_request(GPIO38_SD_PWEN, "sdio power");
if (err) {
dev_err(dev, "can't request MMC power control : %d\n",
free_irq(gpio_to_irq(mmc_cd), data);
regulator_put(em_x270_sdio_ldo);
- if (machine_is_em_x270())
- gpio_free(GPIO95_MMC_WP);
- else
+ if (!machine_is_em_x270())
gpio_free(GPIO38_SD_PWEN);
}
-static int em_x270_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO95_MMC_WP);
-}
-
static struct pxamci_platform_data em_x270_mci_platform_data = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
.init = em_x270_mci_init,
.setpower = em_x270_mci_setpower,
.exit = em_x270_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static void __init em_x270_init_mmc(void)
{
if (machine_is_em_x270())
- em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+ gpiod_add_lookup_table(&em_x270_mci_wp_gpio_table);
pxa_set_mci_info(&em_x270_mci_platform_data);
}
#endif
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master em_x270_spi_info = {
+static struct pxa2xx_spi_controller em_x270_spi_info = {
.num_chipselect = 1,
};
.model = TDO35S,
};
-static struct pxa2xx_spi_master em_x270_spi_2_info = {
+static struct pxa2xx_spi_controller em_x270_spi_2_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
.supply_name = "camera_vdd",
.input_supply = "vcc cam",
.microvolts = 2800000,
- .enable_high = 0,
.init_data = &camera_dummy_initdata,
};