Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

[mirror_ubuntu-jammy-kernel.git] / arch / arm64 / boot / dts / allwinner / sun50i-h6.dtsi

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 0d5ea19336a19d9d5460751a5b4728fa300d324a..29824081b43b0d22cd117d06907260577653a6cd 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -149,6 +149,29 @@
                        allwinner,sram = <&ve_sram 1>;
                };
 
+               gpu: gpu@1800000 {
+                       compatible = "allwinner,sun50i-h6-mali",
+                                    "arm,mali-t720";
+                       reg = <0x01800000 0x4000>;
+                       interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "job", "mmu", "gpu";
+                       clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+                       clock-names = "core", "bus";
+                       resets = <&ccu RST_BUS_GPU>;
+                       status = "disabled";
+               };
+
+               crypto: crypto@1904000 {
+                       compatible = "allwinner,sun50i-h6-crypto";
+                       reg = <0x01904000 0x1000>;
+                       interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
+                       clock-names = "bus", "mod", "ram";
+                       resets = <&ccu RST_BUS_CE>;
+               };
+
                syscon: syscon@3000000 {
                        compatible = "allwinner,sun50i-h6-system-control",
                                     "allwinner,sun50i-a64-system-control";
@@ -299,6 +322,16 @@
                                pins = "PH0", "PH1";
                                function = "uart0";
                        };
+
+                       uart1_pins: uart1-pins {
+                               pins = "PG6", "PG7";
+                               function = "uart1";
+                       };
+
+                       uart1_rts_cts_pins: uart1-rts-cts-pins {
+                               pins = "PG8", "PG9";
+                               function = "uart1";
+                       };
                };
 
                gic: interrupt-controller@3021000 {
@@ -537,6 +570,38 @@
                        status = "disabled";
                };
 
+               dwc3: dwc3@5200000 {
+                       compatible = "snps,dwc3";
+                       reg = <0x05200000 0x10000>;
+                       interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_XHCI>,
+                                <&ccu CLK_BUS_XHCI>,
+                                <&rtc 0>;
+                       clock-names = "ref", "bus_early", "suspend";
+                       resets = <&ccu RST_BUS_XHCI>;
+                       /*
+                        * The datasheet of the chip doesn't declare the
+                        * peripheral function, and there's no boards known
+                        * to have a USB Type-B port routed to the port.
+                        * In addition, no one has tested the peripheral
+                        * function yet.
+                        * So set the dr_mode to "host" in the DTSI file.
+                        */
+                       dr_mode = "host";
+                       phys = <&usb3phy>;
+                       phy-names = "usb3-phy";
+                       status = "disabled";
+               };
+
+               usb3phy: phy@5210000 {
+                       compatible = "allwinner,sun50i-h6-usb3-phy";
+                       reg = <0x5210000 0x10000>;
+                       clocks = <&ccu CLK_USB_PHY1>;
+                       resets = <&ccu RST_USB_PHY1>;
+                       #phy-cells = <0>;
+                       status = "disabled";
+               };
+
                ehci3: usb@5311000 {
                        compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
                        reg = <0x05311000 0x100>;
@@ -618,7 +683,6 @@
                                      "tcon-tv0";
                        clock-output-names = "tcon-top-tv0";
                        resets = <&ccu RST_BUS_TCON_TOP>;
-                       reset-names = "rst";
                        #clock-cells = <1>;
 
                        ports {