Fix common misspellings

[mirror_ubuntu-artful-kernel.git] / arch / mips / jz4740 / board-qi_lb60.c

diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 2c0e107966ad944d6a936bc96b1a27a5c26f29f1..c3b04be3fb2bb4c056e2cb531b5c473d53d23c9f 100644 (file)
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -23,6 +23,7 @@
 #include <linux/spi/spi_gpio.h>
 #include <linux/power_supply.h>
 #include <linux/power/jz4740-battery.h>
+#include <linux/power/gpio-charger.h>
 
 #include <asm/mach-jz4740/jz4740_fb.h>
 #include <asm/mach-jz4740/jz4740_mmc.h>
@@ -49,14 +50,14 @@ static bool is_avt2;
 
 /* NAND */
 static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
-/*     .eccbytes = 36,
+       .eccbytes = 36,
        .eccpos = {
                6,  7,  8,  9,  10, 11, 12, 13,
                14, 15, 16, 17, 18, 19, 20, 21,
                22, 23, 24, 25, 26, 27, 28, 29,
                30, 31, 32, 33, 34, 35, 36, 37,
                38, 39, 40, 41
-       },*/
+       },
        .oobfree = {
                { .offset = 2, .length = 4 },
                { .offset = 42, .length = 22 }
@@ -64,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
 };
 
 /* Early prototypes of the QI LB60 had only 1GB of NAND.
- * In order to support these devices aswell the partition and ecc layout is
+ * In order to support these devices as well the partition and ecc layout is
  * initialized depending on the NAND size */
 static struct mtd_partition qi_lb60_partitions_1gb[] = {
        {
@@ -85,7 +86,7 @@ static struct mtd_partition qi_lb60_partitions_1gb[] = {
 };
 
 static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
-/*     .eccbytes = 72,
+       .eccbytes = 72,
        .eccpos = {
                12, 13, 14, 15, 16, 17, 18, 19,
                20, 21, 22, 23, 24, 25, 26, 27,
@@ -96,7 +97,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
                60, 61, 62, 63, 64, 65, 66, 67,
                68, 69, 70, 71, 72, 73, 74, 75,
                76, 77, 78, 79, 80, 81, 82, 83
-       },*/
+       },
        .oobfree = {
                { .offset = 2, .length = 10 },
                { .offset = 84, .length = 44 },
@@ -396,6 +397,28 @@ static struct platform_device qi_lb60_pwm_beeper = {
        },
 };
 
+/* charger */
+static char *qi_lb60_batteries[] = {
+       "battery",
+};
+
+static struct gpio_charger_platform_data qi_lb60_charger_pdata = {
+       .name = "usb",
+       .type = POWER_SUPPLY_TYPE_USB,
+       .gpio = JZ_GPIO_PORTD(28),
+       .gpio_active_low = 1,
+       .supplied_to = qi_lb60_batteries,
+       .num_supplicants = ARRAY_SIZE(qi_lb60_batteries),
+};
+
+static struct platform_device qi_lb60_charger_device = {
+       .name = "gpio-charger",
+       .dev = {
+               .platform_data = &qi_lb60_charger_pdata,
+       },
+};
+
+
 static struct platform_device *jz_platform_devices[] __initdata = {
        &jz4740_udc_device,
        &jz4740_mmc_device,
@@ -410,12 +433,13 @@ static struct platform_device *jz_platform_devices[] __initdata = {
        &jz4740_adc_device,
        &qi_lb60_gpio_keys,
        &qi_lb60_pwm_beeper,
+       &qi_lb60_charger_device,
 };
 
 static void __init board_gpio_setup(void)
 {
        /* We only need to enable/disable pullup here for pins used in generic
-        * drivers. Everything else is done by the drivers themselfs. */
+        * drivers. Everything else is done by the drivers themselves. */
        jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N);
        jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD);
 }