/* does the board have sdram or ddram */
static int dram_type;
-/* the pll dividers */
-static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
-
static struct ralink_pinmux_grp mode_mux[] = {
{
.name = "i2c",
.uart_mask = MT7620_GPIO_MODE_UART0_MASK,
};
-void __init ralink_clk_init(void)
+static __init u32
+mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
{
- unsigned long cpu_rate, sys_rate;
- u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
- u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
- u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
- u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
-
- if (cpu_clk) {
- cpu_rate = 480000000;
- } else if (!swconfig) {
- cpu_rate = 600000000;
- } else {
- u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
- u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
+ u64 t;
- cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
- }
+ t = ref_rate;
+ t *= mul;
+ do_div(t, div);
+
+ return t;
+}
+
+#define MHZ(x) ((x) * 1000 * 1000)
+
+static __init unsigned long
+mt7620_get_xtal_rate(void)
+{
+ u32 reg;
+
+ reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+ if (reg & SYSCFG0_XTAL_FREQ_SEL)
+ return MHZ(40);
+
+ return MHZ(20);
+}
+
+static __init unsigned long
+mt7620_get_periph_rate(unsigned long xtal_rate)
+{
+ u32 reg;
+
+ reg = rt_sysc_r32(SYSC_REG_CLKCFG0);
+ if (reg & CLKCFG0_PERI_CLK_SEL)
+ return xtal_rate;
+
+ return MHZ(40);
+}
+
+static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 };
+
+static __init unsigned long
+mt7620_get_cpu_pll_rate(unsigned long xtal_rate)
+{
+ u32 reg;
+ u32 mul;
+ u32 div;
+
+ reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
+ if (reg & CPLL_CFG0_BYPASS_REF_CLK)
+ return xtal_rate;
+
+ if ((reg & CPLL_CFG0_SW_CFG) == 0)
+ return MHZ(600);
+
+ mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
+ CPLL_CFG0_PLL_MULT_RATIO_MASK;
+ mul += 24;
+ if (reg & CPLL_CFG0_LC_CURFCK)
+ mul *= 2;
+
+ div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
+ CPLL_CFG0_PLL_DIV_RATIO_MASK;
+
+ WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
+
+ return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]);
+}
+
+static __init unsigned long
+mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate)
+{
+ u32 reg;
+
+ reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
+ if (reg & CPLL_CFG1_CPU_AUX1)
+ return xtal_rate;
+
+ if (reg & CPLL_CFG1_CPU_AUX0)
+ return MHZ(480);
+ return cpu_pll_rate;
+}
+
+static __init unsigned long
+mt7620_get_cpu_rate(unsigned long pll_rate)
+{
+ u32 reg;
+ u32 mul;
+ u32 div;
+
+ reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+ mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
+ div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
+ CPU_SYS_CLKCFG_CPU_FDIV_MASK;
+
+ return mt7620_calc_rate(pll_rate, mul, div);
+}
+
+static const u32 mt7620_ocp_dividers[16] __initconst = {
+ [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
+ [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
+ [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
+ [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
+ [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
+};
+
+static __init unsigned long
+mt7620_get_dram_rate(unsigned long pll_rate)
+{
if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
- sys_rate = cpu_rate / 4;
- else
- sys_rate = cpu_rate / 3;
+ return pll_rate / 4;
+
+ return pll_rate / 3;
+}
+
+static __init unsigned long
+mt7620_get_sys_rate(unsigned long cpu_rate)
+{
+ u32 reg;
+ u32 ocp_ratio;
+ u32 div;
+
+ reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+ ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
+ CPU_SYS_CLKCFG_OCP_RATIO_MASK;
+
+ if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers)))
+ return cpu_rate;
+
+ div = mt7620_ocp_dividers[ocp_ratio];
+ if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
+ return cpu_rate;
+
+ return cpu_rate / div;
+}
+
+void __init ralink_clk_init(void)
+{
+ unsigned long xtal_rate;
+ unsigned long cpu_pll_rate;
+ unsigned long pll_rate;
+ unsigned long cpu_rate;
+ unsigned long sys_rate;
+ unsigned long dram_rate;
+ unsigned long periph_rate;
+
+ xtal_rate = mt7620_get_xtal_rate();
+
+ cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
+ pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
+
+ cpu_rate = mt7620_get_cpu_rate(pll_rate);
+ dram_rate = mt7620_get_dram_rate(pll_rate);
+ sys_rate = mt7620_get_sys_rate(cpu_rate);
+ periph_rate = mt7620_get_periph_rate(xtal_rate);
+
+#define RFMT(label) label ":%lu.%03luMHz "
+#define RINT(x) ((x) / 1000000)
+#define RFRAC(x) (((x) / 1000) % 1000)
+
+ pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
+ RINT(xtal_rate), RFRAC(xtal_rate),
+ RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
+ RINT(pll_rate), RFRAC(pll_rate));
+
+ pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
+ RINT(cpu_rate), RFRAC(cpu_rate),
+ RINT(dram_rate), RFRAC(dram_rate),
+ RINT(sys_rate), RFRAC(sys_rate),
+ RINT(periph_rate), RFRAC(periph_rate));
+
+#undef RFRAC
+#undef RINT
+#undef RFMT
ralink_clk_add("cpu", cpu_rate);
- ralink_clk_add("10000100.timer", 40000000);
- ralink_clk_add("10000500.uart", 40000000);
- ralink_clk_add("10000c00.uartlite", 40000000);
+ ralink_clk_add("10000100.timer", periph_rate);
+ ralink_clk_add("10000120.watchdog", periph_rate);
+ ralink_clk_add("10000500.uart", periph_rate);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", periph_rate);
}
void __init ralink_of_remap(void)
name = "MT7620A";
soc_info->compatible = "ralink,mt7620a-soc";
} else {
- panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1);
}
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
switch (dram_type) {
case SYSCFG0_DRAM_TYPE_SDRAM:
+ pr_info("Board has SDRAM\n");
soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
break;
case SYSCFG0_DRAM_TYPE_DDR1:
+ pr_info("Board has DDR1\n");
soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
break;
case SYSCFG0_DRAM_TYPE_DDR2:
+ pr_info("Board has DDR2\n");
soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
break;
projects / mirror_ubuntu-artful-kernel.git / blobdiff