* if needed
*/
+_ENTRY(__early_start)
/* 1. Find the index of the entry we're executing in */
bl invstr /* Find our address */
invstr: mflr r6 /* Make it accessible */
tlbivax 0,r9
TLBSYNC
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP MAS2_M
+#else
+#define M_IF_SMP 0
+#endif
+
/* 6. Setup KERNELBASE mapping in TLB1[0] */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
- li r7,0
- lis r6,PAGE_OFFSET@h
- ori r6,r6,PAGE_OFFSET@l
- rlwimi r6,r7,0,20,31
+ lis r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@h
+ ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@l
mtspr SPRN_MAS2,r6
mtspr SPRN_MAS3,r8
tlbwe
/* 7. Jump to KERNELBASE mapping */
- lis r6,KERNELBASE@h
- ori r6,r6,KERNELBASE@l
- rlwimi r6,r7,0,20,31
+ lis r6,(KERNELBASE & ~0xfff)@h
+ ori r6,r6,(KERNELBASE & ~0xfff)@l
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */
1: mflr r9
rlwimi r6,r9,0,20,31
- addi r6,r6,24
+ addi r6,r6,(2f - 1b)
mtspr SPRN_SRR0,r6
mtspr SPRN_SRR1,r7
rfi /* start execution out of TLB1[0] entry */
/* 8. Clear out the temp mapping */
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre
mtspr SPRN_DBSR,r2
#endif
+#ifdef CONFIG_SMP
+ /* Check to see if we're the second processor, and jump
+ * to the secondary_start code if so
+ */
+ mfspr r24,SPRN_PIR
+ cmpwi r24,0
+ bne __secondary_start
+#endif
+
/*
* This is where the main kernel code starts.
*/
/* SPE Floating Point Data */
#ifdef CONFIG_SPE
EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
-#else
- EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_SPE */
/* SPE Floating Point Round */
+ EXCEPTION(0x2050, SPEFloatingPointRound, SPEFloatingPointRoundException, EXC_XFER_EE)
+#else
+ EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE)
+#endif /* CONFIG_SPE */
/* Performance Monitor */
EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */
#else
rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
+#endif
+#ifdef CONFIG_SMP
+ ori r12, r12, MAS2_M
#endif
mtspr SPRN_MAS2, r12
iseleq r12, r12, r10
#ifdef CONFIG_PTE_64BIT
-2: rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */
+ rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */
rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */
mtspr SPRN_MAS3, r12
-BEGIN_FTR_SECTION
+BEGIN_MMU_FTR_SECTION
srwi r10, r13, 8 /* grab RPN[8:31] */
mtspr SPRN_MAS7, r10
-END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
#else
-2: rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
+ rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
mtspr SPRN_MAS3, r11
#endif
#ifdef CONFIG_E200
blr
+#ifdef CONFIG_SMP
+/* When we get here, r24 needs to hold the CPU # */
+ .globl __secondary_start
+__secondary_start:
+ lis r3,__secondary_hold_acknowledge@h
+ ori r3,r3,__secondary_hold_acknowledge@l
+ stw r24,0(r3)
+
+ li r3,0
+ mr r4,r24 /* Why? */
+ bl call_setup_cpu
+
+ lis r3,tlbcam_index@ha
+ lwz r3,tlbcam_index@l(r3)
+ mtctr r3
+ li r26,0 /* r26 safe? */
+
+ /* Load each CAM entry */
+1: mr r3,r26
+ bl loadcam_entry
+ addi r26,r26,1
+ bdnz 1b
+
+ /* get current_thread_info and current */
+ lis r1,secondary_ti@ha
+ lwz r1,secondary_ti@l(r1)
+ lwz r2,TI_TASK(r1)
+
+ /* stack */
+ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+ li r0,0
+ stw r0,0(r1)
+
+ /* ptr to current thread */
+ addi r4,r2,THREAD /* address of our thread_struct */
+ mtspr SPRN_SPRG3,r4
+
+ /* Setup the defaults for TLB entries */
+ li r4,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
+ mtspr SPRN_MAS4,r4
+
+ /* Jump to start_secondary */
+ lis r4,MSR_KERNEL@h
+ ori r4,r4,MSR_KERNEL@l
+ lis r3,start_secondary@h
+ ori r3,r3,start_secondary@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ sync
+ rfi
+ sync
+
+ .globl __secondary_hold_acknowledge
+__secondary_hold_acknowledge:
+ .long -1
+#endif
+
/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
projects / mirror_ubuntu-artful-kernel.git / blobdiff