return 0;
}
-static void pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
- struct pnv_ioda_pe *pe)
-{
- struct pnv_ioda_pe *lpe;
-
- list_for_each_entry(lpe, &phb->ioda.pe_dma_list, dma_link) {
- if (lpe->dma_weight < pe->dma_weight) {
- list_add_tail(&pe->dma_link, &lpe->dma_link);
- return;
- }
- }
- list_add_tail(&pe->dma_link, &phb->ioda.pe_dma_list);
-}
-
-static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
-{
- /* This is quite simplistic. The "base" weight of a device
- * is 10. 0 means no DMA is to be accounted for it.
- */
-
- /* If it's a bridge, no DMA */
- if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL)
- return 0;
-
- /* Reduce the weight of slow USB controllers */
- if (dev->class == PCI_CLASS_SERIAL_USB_UHCI ||
- dev->class == PCI_CLASS_SERIAL_USB_OHCI ||
- dev->class == PCI_CLASS_SERIAL_USB_EHCI)
- return 3;
-
- /* Increase the weight of RAID (includes Obsidian) */
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)
- return 15;
-
- /* Default */
- return 10;
-}
-
#ifdef CONFIG_PCI_IOV
static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
{
pe->flags = PNV_IODA_PE_DEV;
pe->pdev = dev;
pe->pbus = NULL;
- pe->tce32_seg = -1;
pe->mve_number = -1;
pe->rid = dev->bus->number << 8 | pdn->devfn;
return NULL;
}
- /* Assign a DMA weight to the device */
- pe->dma_weight = pnv_ioda_dma_weight(dev);
- if (pe->dma_weight != 0) {
- phb->ioda.dma_weight += pe->dma_weight;
- phb->ioda.dma_pe_count++;
- }
-
- /* Link the PE */
- pnv_ioda_link_pe_by_weight(phb, pe);
-
return pe;
}
}
pdn->pcidev = dev;
pdn->pe_number = pe->pe_number;
- pe->dma_weight += pnv_ioda_dma_weight(dev);
if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
pnv_ioda_setup_same_PE(dev->subordinate, pe);
}
pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
pe->pbus = bus;
pe->pdev = NULL;
- pe->tce32_seg = -1;
pe->mve_number = -1;
pe->rid = bus->busn_res.start << 8;
- pe->dma_weight = 0;
if (all)
pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n",
/* Put PE to the list */
list_add_tail(&pe->list, &phb->ioda.pe_list);
-
- /* Account for one DMA PE if at least one DMA capable device exist
- * below the bridge
- */
- if (pe->dma_weight != 0) {
- phb->ioda.dma_weight += pe->dma_weight;
- phb->ioda.dma_pe_count++;
- }
-
- /* Link the PE */
- pnv_ioda_link_pe_by_weight(phb, pe);
}
static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
npu_pdn->pcidev = npu_pdev;
npu_pdn->pe_number = pe_num;
- pe->dma_weight += pnv_ioda_dma_weight(npu_pdev);
phb->ioda.pe_rmap[rid] = pe->pe_number;
/* Map the PE to this link */
pe->flags = PNV_IODA_PE_VF;
pe->pbus = NULL;
pe->parent_dev = pdev;
- pe->tce32_seg = -1;
pe->mve_number = -1;
pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
pci_iov_virtfn_devfn(pdev, vf_index);
.free = pnv_ioda2_table_free,
};
+static int pnv_pci_ioda_dev_dma_weight(struct pci_dev *dev, void *data)
+{
+ unsigned int *weight = (unsigned int *)data;
+
+ /* This is quite simplistic. The "base" weight of a device
+ * is 10. 0 means no DMA is to be accounted for it.
+ */
+ if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL)
+ return 0;
+
+ if (dev->class == PCI_CLASS_SERIAL_USB_UHCI ||
+ dev->class == PCI_CLASS_SERIAL_USB_OHCI ||
+ dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ *weight += 3;
+ else if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)
+ *weight += 15;
+ else
+ *weight += 10;
+
+ return 0;
+}
+
+static unsigned int pnv_pci_ioda_pe_dma_weight(struct pnv_ioda_pe *pe)
+{
+ unsigned int weight = 0;
+
+ /* SRIOV VF has same DMA32 weight as its PF */
+#ifdef CONFIG_PCI_IOV
+ if ((pe->flags & PNV_IODA_PE_VF) && pe->parent_dev) {
+ pnv_pci_ioda_dev_dma_weight(pe->parent_dev, &weight);
+ return weight;
+ }
+#endif
+
+ if ((pe->flags & PNV_IODA_PE_DEV) && pe->pdev) {
+ pnv_pci_ioda_dev_dma_weight(pe->pdev, &weight);
+ } else if ((pe->flags & PNV_IODA_PE_BUS) && pe->pbus) {
+ struct pci_dev *pdev;
+
+ list_for_each_entry(pdev, &pe->pbus->devices, bus_list)
+ pnv_pci_ioda_dev_dma_weight(pdev, &weight);
+ } else if ((pe->flags & PNV_IODA_PE_BUS_ALL) && pe->pbus) {
+ pci_walk_bus(pe->pbus, pnv_pci_ioda_dev_dma_weight, &weight);
+ }
+
+ return weight;
+}
+
static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
struct pnv_ioda_pe *pe,
unsigned int base,
/* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
/* XXX FIXME: Allocate multi-level tables on PHB3 */
- /* We shouldn't already have a 32-bit DMA associated */
- if (WARN_ON(pe->tce32_seg >= 0))
- return;
-
tbl = pnv_pci_table_alloc(phb->hose->node);
iommu_register_group(&pe->table_group, phb->hose->global_number,
pe->pe_number);
pnv_pci_link_table_and_group(phb->hose->node, 0, tbl, &pe->table_group);
/* Grab a 32-bit TCE table */
- pe->tce32_seg = base;
pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
base * PNV_IODA1_DMA32_SEGSIZE,
(base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1);
return;
fail:
/* XXX Failure: Try to fallback to 64-bit only ? */
- if (pe->tce32_seg >= 0)
- pe->tce32_seg = -1;
if (tce_mem)
__free_pages(tce_mem, get_order(tce32_segsz * segs));
if (tbl) {
{
int64_t rc;
- /* We shouldn't already have a 32-bit DMA associated */
- if (WARN_ON(pe->tce32_seg >= 0))
- return;
-
/* TVE #1 is selected by PCI address bit 59 */
pe->tce_bypass_base = 1ull << 59;
pe->pe_number);
/* The PE will reserve all possible 32-bits space */
- pe->tce32_seg = 0;
pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n",
phb->ioda.m32_pci_base);
#endif
rc = pnv_pci_ioda2_setup_default_config(pe);
- if (rc) {
- if (pe->tce32_seg >= 0)
- pe->tce32_seg = -1;
+ if (rc)
return;
- }
if (pe->flags & PNV_IODA_PE_DEV)
iommu_add_device(&pe->pdev->dev);
static void pnv_ioda_setup_dma(struct pnv_phb *phb)
{
struct pci_controller *hose = phb->hose;
- unsigned int residual, remaining, segs, tw, base;
+ unsigned int weight, total_weight, dma_pe_count;
+ unsigned int residual, remaining, segs, base;
struct pnv_ioda_pe *pe;
+ total_weight = 0;
+ pci_walk_bus(phb->hose->bus, pnv_pci_ioda_dev_dma_weight,
+ &total_weight);
+
+ dma_pe_count = 0;
+ list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+ weight = pnv_pci_ioda_pe_dma_weight(pe);
+ if (weight > 0)
+ dma_pe_count++;
+ }
+
/* If we have more PE# than segments available, hand out one
* per PE until we run out and let the rest fail. If not,
* then we assign at least one segment per PE, plus more based
* on the amount of devices under that PE
*/
- if (phb->ioda.dma_pe_count > phb->ioda.tce32_count)
+ if (dma_pe_count > phb->ioda.tce32_count)
residual = 0;
else
- residual = phb->ioda.tce32_count -
- phb->ioda.dma_pe_count;
+ residual = phb->ioda.tce32_count - dma_pe_count;
pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
hose->global_number, phb->ioda.tce32_count);
pr_info("PCI: %d PE# for a total weight of %d\n",
- phb->ioda.dma_pe_count, phb->ioda.dma_weight);
+ dma_pe_count, total_weight);
pnv_pci_ioda_setup_opal_tce_kill(phb);
* weight
*/
remaining = phb->ioda.tce32_count;
- tw = phb->ioda.dma_weight;
base = 0;
- list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) {
- if (!pe->dma_weight)
+ list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+ weight = pnv_pci_ioda_pe_dma_weight(pe);
+ if (!weight)
continue;
+
if (!remaining) {
pe_warn(pe, "No DMA32 resources available\n");
continue;
}
segs = 1;
if (residual) {
- segs += ((pe->dma_weight * residual) + (tw / 2)) / tw;
+ segs += ((weight * residual) + (total_weight / 2)) /
+ total_weight;
if (segs > remaining)
segs = remaining;
}
*/
if (phb->type == PNV_PHB_IODA1) {
pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
- pe->dma_weight, segs);
+ weight, segs);
pnv_pci_ioda1_setup_dma_pe(phb, pe, base, segs);
} else if (phb->type == PNV_PHB_IODA2) {
pe_info(pe, "Assign DMA32 space\n");
struct pci_controller *hose, *tmp;
struct pnv_phb *phb;
struct pnv_ioda_pe *pe;
+ unsigned int weight;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
phb = hose->private_data;
if (phb->type != PNV_PHB_NPU)
continue;
- list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) {
+ list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+ weight = pnv_pci_ioda_pe_dma_weight(pe);
+ if (WARN_ON(!weight))
+ continue;
+
enable_bypass = dma_get_mask(&pe->pdev->dev) ==
DMA_BIT_MASK(64);
pnv_npu_init_dma_pe(pe);
phb->ioda.pe_array = aux + pemap_off;
set_bit(phb->ioda.reserved_pe_idx, phb->ioda.pe_alloc);
- INIT_LIST_HEAD(&phb->ioda.pe_dma_list);
INIT_LIST_HEAD(&phb->ioda.pe_list);
mutex_init(&phb->ioda.pe_list_mutex);
projects / mirror_ubuntu-zesty-kernel.git / blobdiff