# options which some versions of GCC's C++ compiler complain about
# because they only make sense for C programs.
QEMU_CXXFLAGS="$QEMU_CXXFLAGS -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS"
- CONFIGURE_CXXFLAGS=$(echo "$CONFIGURE_CFLAGS" | sed s/-std=gnu99/-std=gnu++11/)
+ CONFIGURE_CXXFLAGS=$(echo "$CONFIGURE_CFLAGS" | sed s/-std=gnu11/-std=gnu++11/)
for arg in $QEMU_CFLAGS; do
case $arg in
-Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
vhost_user="no"
vhost_user_blk_server="auto"
vhost_user_fs="$default_feature"
+bpf="auto"
kvm="auto"
hax="auto"
hvf="auto"
nettle="$default_feature"
nettle_xts="no"
gcrypt="$default_feature"
-gcrypt_hmac="no"
gcrypt_xts="no"
qemu_private_xts="yes"
auth_pam="$default_feature"
QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
# Flags that are needed during configure but later taken care of by Meson
-CONFIGURE_CFLAGS="-std=gnu99 -Wall"
+CONFIGURE_CFLAGS="-std=gnu11 -Wall"
CONFIGURE_LDFLAGS=
;;
--enable-membarrier) membarrier="yes"
;;
+ --disable-bpf) bpf="disabled"
+ ;;
+ --enable-bpf) bpf="enabled"
+ ;;
--disable-blobs) blobs="false"
;;
--with-pkgversion=*) pkgversion="$optarg"
vhost-user vhost-user backend support
vhost-user-blk-server vhost-user-blk server support
vhost-vdpa vhost-vdpa kernel backend support
+ bpf BPF kernel support
spice spice
spice-protocol spice-protocol
rbd rados block device (rbd)
cat > $TMPC << EOF
#if defined(__clang_major__) && defined(__clang_minor__)
# ifdef __apple_build_version__
-# if __clang_major__ < 5 || (__clang_major__ == 5 && __clang_minor__ < 1)
-# error You need at least XCode Clang v5.1 to compile QEMU
+# if __clang_major__ < 10 || (__clang_major__ == 10 && __clang_minor__ < 0)
+# error You need at least XCode Clang v10.0 to compile QEMU
# endif
# else
-# if __clang_major__ < 3 || (__clang_major__ == 3 && __clang_minor__ < 4)
-# error You need at least Clang v3.4 to compile QEMU
+# if __clang_major__ < 6 || (__clang_major__ == 6 && __clang_minor__ < 0)
+# error You need at least Clang v6.0 to compile QEMU
# endif
# endif
#elif defined(__GNUC__) && defined(__GNUC_MINOR__)
-# if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 8)
-# error You need at least GCC v4.8 to compile QEMU
+# if __GNUC__ < 7 || (__GNUC__ == 7 && __GNUC_MINOR__ < 5)
+# error You need at least GCC v7.5.0 to compile QEMU
# endif
#else
# error You either need GCC or Clang to compiler QEMU
int main (void) { return 0; }
EOF
if ! compile_prog "" "" ; then
- error_exit "You need at least GCC v4.8 or Clang v3.4 (or XCode Clang v5.1)"
+ error_exit "You need at least GCC v7.5 or Clang v6.0 (or XCode Clang v10.0)"
fi
# Accumulate -Wfoo and -Wno-bar separately.
if test "$gnutls" != "no"; then
pass="no"
- if $pkg_config --exists "gnutls >= 3.1.18"; then
+ if $pkg_config --exists "gnutls >= 3.5.18"; then
gnutls_cflags=$($pkg_config --cflags gnutls)
gnutls_libs=$($pkg_config --libs gnutls)
# Packaging for the static libraries is not always correct.
maj=`libgcrypt-config --version | awk -F . '{print $1}'`
min=`libgcrypt-config --version | awk -F . '{print $2}'`
- if test $maj != 1 || test $min -lt 5
+ if test $maj != 1 || test $min -lt 8
then
return 1
fi
if test "$nettle" != "no"; then
pass="no"
- if $pkg_config --exists "nettle >= 2.7.1"; then
+ if $pkg_config --exists "nettle >= 3.4"; then
nettle_cflags=$($pkg_config --cflags nettle)
nettle_libs=$($pkg_config --libs nettle)
- nettle_version=$($pkg_config --modversion nettle)
# Link test to make sure the given libraries work (e.g for static).
write_c_skeleton
if compile_prog "" "$nettle_libs" ; then
gcrypt="yes"
cat > $TMPC << EOF
#include <gcrypt.h>
-int main(void) {
- gcry_mac_hd_t handle;
- gcry_mac_open(&handle, GCRY_MAC_HMAC_MD5,
- GCRY_MAC_FLAG_SECURE, NULL);
- return 0;
-}
-EOF
- if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
- gcrypt_hmac=yes
- fi
- cat > $TMPC << EOF
-#include <gcrypt.h>
int main(void) {
gcry_cipher_hd_t handle;
gcry_cipher_open(&handle, GCRY_CIPHER_AES, GCRY_CIPHER_MODE_XTS, 0);
##########################################
# glib support probe
-glib_req_ver=2.48
+glib_req_ver=2.56
glib_modules=gthread-2.0
if test "$modules" = yes; then
glib_modules="$glib_modules gmodule-export-2.0"
##########################################
# libssh probe
if test "$libssh" != "no" ; then
- if $pkg_config --exists libssh; then
+ if $pkg_config --exists "libssh >= 0.8.7"; then
libssh_cflags=$($pkg_config libssh --cflags)
libssh_libs=$($pkg_config libssh --libs)
libssh=yes
fi
fi
-##########################################
-# Check for libssh 0.8
-# This is done like this instead of using the LIBSSH_VERSION_* and
-# SSH_VERSION_* macros because some distributions in the past shipped
-# snapshots of the future 0.8 from Git, and those snapshots did not
-# have updated version numbers (still referring to 0.7.0).
-
-if test "$libssh" = "yes"; then
- cat > $TMPC <<EOF
-#include <libssh/libssh.h>
-int main(void) { return ssh_get_server_publickey(NULL, NULL); }
-EOF
- if compile_prog "$libssh_cflags" "$libssh_libs"; then
- libssh_cflags="-DHAVE_LIBSSH_0_8 $libssh_cflags"
- fi
-fi
-
##########################################
# linux-aio probe
st_atim=yes
fi
+##########################################
+# check if we have sigev_notify_thread_id
+
+sigev_notify_thread_id=no
+cat > $TMPC << EOF
+#include <stddef.h>
+#include <signal.h>
+int main(void) { return offsetof(struct sigevent, sigev_notify_thread_id); }
+EOF
+if compile_prog "" "" ; then
+ sigev_notify_thread_id=yes
+fi
+
##########################################
# check if trace backend exists
have_sysmacros=yes
fi
-##########################################
-# check for _Static_assert()
-
-have_static_assert=no
-cat > $TMPC << EOF
-_Static_assert(1, "success");
-int main(void) {
- return 0;
-}
-EOF
-if compile_prog "" "" ; then
- have_static_assert=yes
-fi
-
##########################################
# check for utmpx.h, it is missing e.g. on OpenBSD
write_c_skeleton
compile_prog "-march=z900" ""
has_z900=$?
- if [ $has_z900 = 0 ] || compile_prog "-march=z10" ""; then
+ if [ $has_z900 = 0 ] || compile_object "-march=z10 -msoft-float -Werror"; then
if [ $has_z900 != 0 ]; then
echo "WARNING: Your compiler does not support the z900!"
echo " The s390-ccw bios will only work with guest CPUs >= z10."
if test "$st_atim" = "yes" ; then
echo "HAVE_STRUCT_STAT_ST_ATIM=y" >> $config_host_mak
fi
+if test "$sigev_notify_thread_id" = "yes" ; then
+ echo "HAVE_SIGEV_NOTIFY_THREAD_ID=y" >> $config_host_mak
+fi
if test "$byteswap_h" = "yes" ; then
echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak
fi
fi
if test "$gcrypt" = "yes" ; then
echo "CONFIG_GCRYPT=y" >> $config_host_mak
- if test "$gcrypt_hmac" = "yes" ; then
- echo "CONFIG_GCRYPT_HMAC=y" >> $config_host_mak
- fi
echo "GCRYPT_CFLAGS=$gcrypt_cflags" >> $config_host_mak
echo "GCRYPT_LIBS=$gcrypt_libs" >> $config_host_mak
fi
if test "$nettle" = "yes" ; then
echo "CONFIG_NETTLE=y" >> $config_host_mak
- echo "CONFIG_NETTLE_VERSION_MAJOR=${nettle_version%%.*}" >> $config_host_mak
echo "NETTLE_CFLAGS=$nettle_cflags" >> $config_host_mak
echo "NETTLE_LIBS=$nettle_libs" >> $config_host_mak
fi
if test "$optreset" = "yes" ; then
echo "HAVE_OPTRESET=y" >> $config_host_mak
fi
+if test "$tcg" = "enabled" -a "$tcg_interpreter" = "true" ; then
+ echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
+fi
if test "$fdatasync" = "yes" ; then
echo "CONFIG_FDATASYNC=y" >> $config_host_mak
fi
echo "CONFIG_SYSMACROS=y" >> $config_host_mak
fi
-if test "$have_static_assert" = "yes" ; then
- echo "CONFIG_STATIC_ASSERT=y" >> $config_host_mak
-fi
-
if test "$have_utmpx" = "yes" ; then
echo "HAVE_UTMPX=y" >> $config_host_mak
fi
i386)
echo "cpu_family = 'x86'" >> $cross
;;
- x86_64)
+ x86_64|x32)
echo "cpu_family = 'x86_64'" >> $cross
;;
ppc64le)
-Dattr=$attr -Ddefault_devices=$default_devices \
-Ddocs=$docs -Dsphinx_build=$sphinx_build -Dinstall_blobs=$blobs \
-Dvhost_user_blk_server=$vhost_user_blk_server -Dmultiprocess=$multiprocess \
- -Dfuse=$fuse -Dfuse_lseek=$fuse_lseek -Dguest_agent_msi=$guest_agent_msi \
+ -Dfuse=$fuse -Dfuse_lseek=$fuse_lseek -Dguest_agent_msi=$guest_agent_msi -Dbpf=$bpf\
$(if test "$default_features" = no; then echo "-Dauto_features=disabled"; fi) \
-Dtcg_interpreter=$tcg_interpreter \
$cross_arg \
# Create list of config switches that should be poisoned in common code...
# but filter out CONFIG_TCG and CONFIG_USER_ONLY which are special.
-sed -n -e '/CONFIG_TCG/d' -e '/CONFIG_USER_ONLY/d' \
- -e '/^#define / { s///; s/ .*//; s/^/#pragma GCC poison /p; }' \
- *-config-devices.h *-config-target.h | \
- sort -u > config-poison.h
+target_configs_h=$(ls *-config-devices.h *-config-target.h 2>/dev/null)
+if test -n "$target_configs_h" ; then
+ sed -n -e '/CONFIG_TCG/d' -e '/CONFIG_USER_ONLY/d' \
+ -e '/^#define / { s///; s/ .*//; s/^/#pragma GCC poison /p; }' \
+ $target_configs_h | sort -u > config-poison.h
+else
+ :> config-poison.h
+fi
# Save the configure command line for later reuse.
cat <<EOD >config.status
projects / mirror_qemu.git / blobdiff