cpu->exit_request = 1;
}
-#if defined(TARGET_M68K)
- env->cc_op = CC_OP_FLAGS;
- env->cc_dest = env->sr & 0xf;
- env->cc_x = (env->sr >> 4) & 1;
-#elif defined(TARGET_PPC)
- env->reserve_addr = -1;
-#endif
cc->cpu_exec_enter(cpu);
cpu->exception_index = -1;
cpu->exception_index = EXCP_DEBUG;
cpu_loop_exit(cpu);
}
-#if defined(TARGET_ARM) || defined(TARGET_SPARC) || defined(TARGET_MIPS) || \
- defined(TARGET_PPC) || defined(TARGET_ALPHA) || defined(TARGET_CRIS) || \
- defined(TARGET_MICROBLAZE) || defined(TARGET_LM32) || \
- defined(TARGET_UNICORE32) || defined(TARGET_TRICORE)
if (interrupt_request & CPU_INTERRUPT_HALT) {
cpu->interrupt_request &= ~CPU_INTERRUPT_HALT;
cpu->halted = 1;
cpu->exception_index = EXCP_HLT;
cpu_loop_exit(cpu);
}
-#endif
#if defined(TARGET_I386)
if (interrupt_request & CPU_INTERRUPT_INIT) {
cpu_svm_check_intercept_param(env, SVM_EXIT_INIT, 0);
cpu_reset(cpu);
}
#endif
-#if defined(TARGET_I386)
-#if !defined(CONFIG_USER_ONLY)
- if (interrupt_request & CPU_INTERRUPT_POLL) {
- cpu->interrupt_request &= ~CPU_INTERRUPT_POLL;
- apic_poll_irq(x86_cpu->apic_state);
- }
-#endif
- if (interrupt_request & CPU_INTERRUPT_SIPI) {
- do_cpu_sipi(x86_cpu);
- } else if (env->hflags2 & HF2_GIF_MASK) {
- if ((interrupt_request & CPU_INTERRUPT_SMI) &&
- !(env->hflags & HF_SMM_MASK)) {
- cpu_svm_check_intercept_param(env, SVM_EXIT_SMI,
- 0);
- cpu->interrupt_request &= ~CPU_INTERRUPT_SMI;
- do_smm_enter(x86_cpu);
- next_tb = 0;
- } else if ((interrupt_request & CPU_INTERRUPT_NMI) &&
- !(env->hflags2 & HF2_NMI_MASK)) {
- cpu->interrupt_request &= ~CPU_INTERRUPT_NMI;
- env->hflags2 |= HF2_NMI_MASK;
- do_interrupt_x86_hardirq(env, EXCP02_NMI, 1);
- next_tb = 0;
- } else if (interrupt_request & CPU_INTERRUPT_MCE) {
- cpu->interrupt_request &= ~CPU_INTERRUPT_MCE;
- do_interrupt_x86_hardirq(env, EXCP12_MCHK, 0);
- next_tb = 0;
- } else if ((interrupt_request & CPU_INTERRUPT_HARD) &&
- (((env->hflags2 & HF2_VINTR_MASK) &&
- (env->hflags2 & HF2_HIF_MASK)) ||
- (!(env->hflags2 & HF2_VINTR_MASK) &&
- (env->eflags & IF_MASK &&
- !(env->hflags & HF_INHIBIT_IRQ_MASK))))) {
- int intno;
- cpu_svm_check_intercept_param(env, SVM_EXIT_INTR,
- 0);
- cpu->interrupt_request &= ~(CPU_INTERRUPT_HARD |
- CPU_INTERRUPT_VIRQ);
- intno = cpu_get_pic_interrupt(env);
- qemu_log_mask(CPU_LOG_TB_IN_ASM, "Servicing hardware INT=0x%02x\n", intno);
- do_interrupt_x86_hardirq(env, intno, 1);
- /* ensure that no TB jump will be modified as
- the program flow was changed */
- next_tb = 0;
-#if !defined(CONFIG_USER_ONLY)
- } else if ((interrupt_request & CPU_INTERRUPT_VIRQ) &&
- (env->eflags & IF_MASK) &&
- !(env->hflags & HF_INHIBIT_IRQ_MASK)) {
- int intno;
- /* FIXME: this should respect TPR */
- cpu_svm_check_intercept_param(env, SVM_EXIT_VINTR,
- 0);
- intno = ldl_phys(cpu->as,
- env->vm_vmcb
- + offsetof(struct vmcb,
- control.int_vector));
- qemu_log_mask(CPU_LOG_TB_IN_ASM, "Servicing virtual hardware INT=0x%02x\n", intno);
- do_interrupt_x86_hardirq(env, intno, 1);
- cpu->interrupt_request &= ~CPU_INTERRUPT_VIRQ;
- next_tb = 0;
-#endif
- }
- }
-#elif defined(TARGET_PPC)
- if (interrupt_request & CPU_INTERRUPT_HARD) {
- ppc_hw_interrupt(env);
- if (env->pending_interrupts == 0) {
- cpu->interrupt_request &= ~CPU_INTERRUPT_HARD;
- }
- next_tb = 0;
- }
-#elif defined(TARGET_LM32)
- if ((interrupt_request & CPU_INTERRUPT_HARD)
- && (env->ie & IE_IE)) {
- cpu->exception_index = EXCP_IRQ;
- cc->do_interrupt(cpu);
+ /* The target hook has 3 exit conditions:
+ False when the interrupt isn't processed,
+ True when it is, and we should restart on a new TB,
+ and via longjmp via cpu_loop_exit. */
+ if (cc->cpu_exec_interrupt(cpu, interrupt_request)) {
next_tb = 0;
}
-#elif defined(TARGET_MICROBLAZE)
- if ((interrupt_request & CPU_INTERRUPT_HARD)
- && (env->sregs[SR_MSR] & MSR_IE)
- && !(env->sregs[SR_MSR] & (MSR_EIP | MSR_BIP))
- && !(env->iflags & (D_FLAG | IMM_FLAG))) {
- cpu->exception_index = EXCP_IRQ;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
-#elif defined(TARGET_MIPS)
- if ((interrupt_request & CPU_INTERRUPT_HARD) &&
- cpu_mips_hw_interrupts_pending(env)) {
- /* Raise it */
- cpu->exception_index = EXCP_EXT_INTERRUPT;
- env->error_code = 0;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
-#elif defined(TARGET_TRICORE)
- if ((interrupt_request & CPU_INTERRUPT_HARD)) {
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
-
-#elif defined(TARGET_OPENRISC)
- {
- int idx = -1;
- if ((interrupt_request & CPU_INTERRUPT_HARD)
- && (env->sr & SR_IEE)) {
- idx = EXCP_INT;
- }
- if ((interrupt_request & CPU_INTERRUPT_TIMER)
- && (env->sr & SR_TEE)) {
- idx = EXCP_TICK;
- }
- if (idx >= 0) {
- cpu->exception_index = idx;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
- }
-#elif defined(TARGET_SPARC)
- if (interrupt_request & CPU_INTERRUPT_HARD) {
- if (cpu_interrupts_enabled(env) &&
- env->interrupt_index > 0) {
- int pil = env->interrupt_index & 0xf;
- int type = env->interrupt_index & 0xf0;
-
- if (((type == TT_EXTINT) &&
- cpu_pil_allowed(env, pil)) ||
- type != TT_EXTINT) {
- cpu->exception_index = env->interrupt_index;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
- }
- }
-#elif defined(TARGET_ARM)
- if (interrupt_request & CPU_INTERRUPT_FIQ
- && !(env->daif & PSTATE_F)) {
- cpu->exception_index = EXCP_FIQ;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
- /* ARMv7-M interrupt return works by loading a magic value
- into the PC. On real hardware the load causes the
- return to occur. The qemu implementation performs the
- jump normally, then does the exception return when the
- CPU tries to execute code at the magic address.
- This will cause the magic PC value to be pushed to
- the stack if an interrupt occurred at the wrong time.
- We avoid this by disabling interrupts when
- pc contains a magic address. */
- if (interrupt_request & CPU_INTERRUPT_HARD
- && !(env->daif & PSTATE_I)
- && (!IS_M(env) || env->regs[15] < 0xfffffff0)) {
- cpu->exception_index = EXCP_IRQ;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
-#elif defined(TARGET_UNICORE32)
- if (interrupt_request & CPU_INTERRUPT_HARD
- && !(env->uncached_asr & ASR_I)) {
- cpu->exception_index = UC32_EXCP_INTR;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
-#elif defined(TARGET_SH4)
- if (interrupt_request & CPU_INTERRUPT_HARD) {
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
-#elif defined(TARGET_ALPHA)
- {
- int idx = -1;
- /* ??? This hard-codes the OSF/1 interrupt levels. */
- switch (env->pal_mode ? 7 : env->ps & PS_INT_MASK) {
- case 0 ... 3:
- if (interrupt_request & CPU_INTERRUPT_HARD) {
- idx = EXCP_DEV_INTERRUPT;
- }
- /* FALLTHRU */
- case 4:
- if (interrupt_request & CPU_INTERRUPT_TIMER) {
- idx = EXCP_CLK_INTERRUPT;
- }
- /* FALLTHRU */
- case 5:
- if (interrupt_request & CPU_INTERRUPT_SMP) {
- idx = EXCP_SMP_INTERRUPT;
- }
- /* FALLTHRU */
- case 6:
- if (interrupt_request & CPU_INTERRUPT_MCHK) {
- idx = EXCP_MCHK;
- }
- }
- if (idx >= 0) {
- cpu->exception_index = idx;
- env->error_code = 0;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
- }
-#elif defined(TARGET_CRIS)
- if (interrupt_request & CPU_INTERRUPT_HARD
- && (env->pregs[PR_CCS] & I_FLAG)
- && !env->locked_irq) {
- cpu->exception_index = EXCP_IRQ;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
- if (interrupt_request & CPU_INTERRUPT_NMI) {
- unsigned int m_flag_archval;
- if (env->pregs[PR_VR] < 32) {
- m_flag_archval = M_FLAG_V10;
- } else {
- m_flag_archval = M_FLAG_V32;
- }
- if ((env->pregs[PR_CCS] & m_flag_archval)) {
- cpu->exception_index = EXCP_NMI;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
- }
-#elif defined(TARGET_M68K)
- if (interrupt_request & CPU_INTERRUPT_HARD
- && ((env->sr & SR_I) >> SR_I_SHIFT)
- < env->pending_level) {
- /* Real hardware gets the interrupt vector via an
- IACK cycle at this point. Current emulated
- hardware doesn't rely on this, so we
- provide/save the vector when the interrupt is
- first signalled. */
- cpu->exception_index = env->pending_vector;
- do_interrupt_m68k_hardirq(env);
- next_tb = 0;
- }
-#elif defined(TARGET_S390X) && !defined(CONFIG_USER_ONLY)
- if ((interrupt_request & CPU_INTERRUPT_HARD) &&
- (env->psw.mask & PSW_MASK_EXT)) {
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
-#elif defined(TARGET_XTENSA)
- if (interrupt_request & CPU_INTERRUPT_HARD) {
- cpu->exception_index = EXC_IRQ;
- cc->do_interrupt(cpu);
- next_tb = 0;
- }
-#endif
- /* Don't use the cached interrupt_request value,
- do_interrupt may have updated the EXITTB flag. */
+ /* Don't use the cached interrupt_request value,
+ do_interrupt may have updated the EXITTB flag. */
if (cpu->interrupt_request & CPU_INTERRUPT_EXITTB) {
cpu->interrupt_request &= ~CPU_INTERRUPT_EXITTB;
/* ensure that no TB jump will be modified as
* local variables as longjmp is marked 'noreturn'. */
cpu = current_cpu;
env = cpu->env_ptr;
-#if !(defined(CONFIG_USER_ONLY) && \
- (defined(TARGET_M68K) || defined(TARGET_PPC) || defined(TARGET_S390X)))
cc = CPU_GET_CLASS(cpu);
-#endif
#ifdef TARGET_I386
x86_cpu = X86_CPU(cpu);
#endif
}
} /* for(;;) */
-
-#if defined(TARGET_M68K)
- cpu_m68k_flush_flags(env, env->cc_op);
- env->cc_op = CC_OP_FLAGS;
- env->sr = (env->sr & 0xffe0)
- | env->cc_dest | (env->cc_x << 4);
-#endif
cc->cpu_exec_exit(cpu);
/* fail safe : never use current_cpu outside cpu_exec() */
projects / mirror_qemu.git / blobdiff