}
/**
- * key_extract - extracts a flow key from an Ethernet frame.
+ * key_extract_l3l4 - extracts L3/L4 header information.
* @skb: sk_buff that contains the frame, with skb->data pointing to the
- * Ethernet header
+ * L3 header
* @key: output flow key
- *
- * The caller must ensure that skb->len >= ETH_HLEN.
- *
- * Returns 0 if successful, otherwise a negative errno value.
- *
- * Initializes @skb header fields as follows:
- *
- * - skb->mac_header: the L2 header.
- *
- * - skb->network_header: just past the L2 header, or just past the
- * VLAN header, to the first byte of the L2 payload.
- *
- * - skb->transport_header: If key->eth.type is ETH_P_IP or ETH_P_IPV6
- * on output, then just past the IP header, if one is present and
- * of a correct length, otherwise the same as skb->network_header.
- * For other key->eth.type values it is left untouched.
- *
- * - skb->protocol: the type of the data starting at skb->network_header.
- * Equals to key->eth.type.
*/
-static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
+static int key_extract_l3l4(struct sk_buff *skb, struct sw_flow_key *key)
{
int error;
- struct ethhdr *eth;
-
- /* Flags are always used as part of stats */
- key->tp.flags = 0;
-
- skb_reset_mac_header(skb);
-
- /* Link layer. */
- clear_vlan(key);
- if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) {
- if (unlikely(eth_type_vlan(skb->protocol)))
- return -EINVAL;
-
- skb_reset_network_header(skb);
- key->eth.type = skb->protocol;
- } else {
- eth = eth_hdr(skb);
- ether_addr_copy(key->eth.src, eth->h_source);
- ether_addr_copy(key->eth.dst, eth->h_dest);
-
- __skb_pull(skb, 2 * ETH_ALEN);
- /* We are going to push all headers that we pull, so no need to
- * update skb->csum here.
- */
-
- if (unlikely(parse_vlan(skb, key)))
- return -ENOMEM;
-
- key->eth.type = parse_ethertype(skb);
- if (unlikely(key->eth.type == htons(0)))
- return -ENOMEM;
-
- /* Multiple tagged packets need to retain TPID to satisfy
- * skb_vlan_pop(), which will later shift the ethertype into
- * skb->protocol.
- */
- if (key->eth.cvlan.tci & htons(VLAN_CFI_MASK))
- skb->protocol = key->eth.cvlan.tpid;
- else
- skb->protocol = key->eth.type;
-
- skb_reset_network_header(skb);
- __skb_push(skb, skb->data - skb_mac_header(skb));
- }
-
- skb_reset_mac_len(skb);
/* Network layer. */
if (key->eth.type == htons(ETH_P_IP)) {
return 0;
}
+/**
+ * key_extract - extracts a flow key from an Ethernet frame.
+ * @skb: sk_buff that contains the frame, with skb->data pointing to the
+ * Ethernet header
+ * @key: output flow key
+ *
+ * The caller must ensure that skb->len >= ETH_HLEN.
+ *
+ * Returns 0 if successful, otherwise a negative errno value.
+ *
+ * Initializes @skb header fields as follows:
+ *
+ * - skb->mac_header: the L2 header.
+ *
+ * - skb->network_header: just past the L2 header, or just past the
+ * VLAN header, to the first byte of the L2 payload.
+ *
+ * - skb->transport_header: If key->eth.type is ETH_P_IP or ETH_P_IPV6
+ * on output, then just past the IP header, if one is present and
+ * of a correct length, otherwise the same as skb->network_header.
+ * For other key->eth.type values it is left untouched.
+ *
+ * - skb->protocol: the type of the data starting at skb->network_header.
+ * Equals to key->eth.type.
+ */
+static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
+{
+ struct ethhdr *eth;
+
+ /* Flags are always used as part of stats */
+ key->tp.flags = 0;
+
+ skb_reset_mac_header(skb);
+
+ /* Link layer. */
+ clear_vlan(key);
+ if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) {
+ if (unlikely(eth_type_vlan(skb->protocol)))
+ return -EINVAL;
+
+ skb_reset_network_header(skb);
+ key->eth.type = skb->protocol;
+ } else {
+ eth = eth_hdr(skb);
+ ether_addr_copy(key->eth.src, eth->h_source);
+ ether_addr_copy(key->eth.dst, eth->h_dest);
+
+ __skb_pull(skb, 2 * ETH_ALEN);
+ /* We are going to push all headers that we pull, so no need to
+ * update skb->csum here.
+ */
+
+ if (unlikely(parse_vlan(skb, key)))
+ return -ENOMEM;
+
+ key->eth.type = parse_ethertype(skb);
+ if (unlikely(key->eth.type == htons(0)))
+ return -ENOMEM;
+
+ /* Multiple tagged packets need to retain TPID to satisfy
+ * skb_vlan_pop(), which will later shift the ethertype into
+ * skb->protocol.
+ */
+ if (key->eth.cvlan.tci & htons(VLAN_CFI_MASK))
+ skb->protocol = key->eth.cvlan.tpid;
+ else
+ skb->protocol = key->eth.type;
+
+ skb_reset_network_header(skb);
+ __skb_push(skb, skb->data - skb_mac_header(skb));
+ }
+
+ skb_reset_mac_len(skb);
+
+ /* Fill out L3/L4 key info, if any */
+ return key_extract_l3l4(skb, key);
+}
+
+/* In the case of conntrack fragment handling it expects L3 headers,
+ * add a helper.
+ */
+int ovs_flow_key_update_l3l4(struct sk_buff *skb, struct sw_flow_key *key)
+{
+ return key_extract_l3l4(skb, key);
+}
+
int ovs_flow_key_update(struct sk_buff *skb, struct sw_flow_key *key)
{
int res;
projects / ovs.git / blobdiff