+pve-cluster (7.2-2) bullseye; urgency=medium
+
+ * datacenter cfg: clarify that the next-id's upper boundary is exclusive and
+ adapt the max value accordingly
+
+ * cluster config: mark qdevice end point as protected to ensure we always
+ can get its status
+
+ * corosync.conf sync: add heuristic to wait for propagation of change to all
+ nodes before triggering a cluster wide config reload
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 14 Jul 2022 07:36:07 +0200
+
+pve-cluster (7.2-1) bullseye; urgency=medium
+
+ * fix #439: datacenter config: add infrastructure for next-id range
+ configuration
+
+ * fix #3957: spell 'occurred' correctly
+
+ * parse datacenter config: remove "\s*" from comment regex
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 28 Apr 2022 17:11:10 +0200
+
+pve-cluster (7.1-3) bullseye; urgency=medium
+
+ * cluster log: fix a segfault / wrong iteration bounds in ringbuffer
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 15 Dec 2021 15:24:22 +0100
+
+pve-cluster (7.1-2) bullseye; urgency=medium
+
+ * fix #3596: handle delnode of offline node
+
+ * datacenter.cfg: avoid warning due to broken fallback if no config file
+ exists
+
+ -- Proxmox Support Team <support@proxmox.com> Mon, 15 Nov 2021 14:31:56 +0100
+
+pve-cluster (7.0-5) bullseye; urgency=medium
+
+ * add WebAuthn configuration to datacenter.cfg
+
+ * sysctl snippet: move from /etc to /usr/lib and prefix with `10-` to allow
+ for grasping ordering easier
+
+ * sysctl: disable net.ipv4.igmp_link_local_mcast_reports to reduce ICMPv3
+ broadcasts to the network when a guest interface is plugged into their
+ firewall bridge
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 11 Nov 2021 17:20:23 +0100
+
+pve-cluster (7.0-4) bullseye; urgency=medium
+
+ * datacenter config: add notes property to allow documenting clustert-
+ wide comments/notes
+
+ * api: join info: return explicit HTTP status error-code (424) for
+ no-cluster instead of generic 500 one
+
+ * add 'jobs.cfg' to observed files
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 09 Nov 2021 18:30:10 +0100
+
+pve-cluster (7.0-3) bullseye; urgency=medium
+
+ * pmxcfs: bump basic FS limits, 1 MiB per-file, 128 MiB total and 256k
+ inodes
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 01 Jul 2021 12:42:52 +0200
+
+pve-cluster (7.0-2) bullseye; urgency=medium
+
+ * get tasklist: unpack null-terminated C string before decoding as JSON for
+ compatibillity with the JSON perl-module shipped in Bullseye
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 20 May 2021 11:21:02 +0200
+
+pve-cluster (7.0-1) bullseye; urgency=medium
+
+ * re-build for Debian 11 Bullseye based releases
+
+ -- Proxmox Support Team <support@proxmox.com> Sun, 09 May 2021 17:55:48 +0200
+
+pve-cluster (6.4-1) pve; urgency=medium
+
+ * pmxcfs: do not grant LXC configs o+r permissions by default anymore
+
+ * add various tech-preview SDN configuration files
+
+ * rename sdn/.version to sdn/.running-config
+
+ * pmxcfs: db: use SQLITE_STATIC when writing FS updates to the DB to avoid
+ memory copies
+
+ * pmxcfs: db: tell query planner that our prepared statement are long living
+
+ * cfs lock: avoid confusing lock prefix on error from the executed code
+
+ -- Proxmox Support Team <support@proxmox.com> Mon, 26 Apr 2021 16:01:04 +0200
+
+pve-cluster (6.2-1) pve; urgency=medium
+
+ * pvecm: print correct nodename when finishing join, to avoid confusion
+
+ * fix #2727: pass correct format for linkX
+
+ * pmxcfs sync: properly check for corosync error
+
+ * pmxcfs: protect CPG operations with mutex
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 30 Sep 2020 13:48:59 +0200
+
+pve-cluster (6.1-8) pve; urgency=medium
+
+ * add ACME plugin config file to cluster files
+
+ * add firewall config locking helper
+
+ * ensure base directories of observed files is created in a central way
+
+ * drop SDN .new files and add .version mechanism
+
+ -- Proxmox Support Team <support@proxmox.com> Sun, 03 May 2020 18:19:28 +0200
+
+pve-cluster (6.1-5) pve; urgency=medium
+
+ * improve and add to corosync configuration sanity checking on join with more
+ tests.
+
+ * Enable support for up to 8 corosync links
+
+ * pvecm: qdevice setup: fix check for unsupported odd node count
+
+ * Add cluster join API version check
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 25 Mar 2020 17:38:46 +0100
+
+pve-cluster (6.1-4) pve; urgency=medium
+
+ * pmxcfs: add verify_token IPC request
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 28 Jan 2020 15:24:42 +0100
+
+pve-cluster (6.1-3) pve; urgency=medium
+
+ * fix #2553: ensure status and memdb mutex locking is always the same order
+ to avoid a possible deadlock when accessing the cluster resources status
+ API endpoing while doing snapshots or renames of VMID.conf files frequently
+
+ * add "cpu-models.conf" to observed files
+
+ -- Proxmox Support Team <support@proxmox.com> Fri, 17 Jan 2020 10:30:10 +0100
+
+pve-cluster (6.1-2) pve; urgency=medium
+
+ * allow full-mesh routed setup for cluster join
+
+ * describe 'migrate' HA shutdown policy in datacenter.cfg man-page
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 27 Nov 2019 17:19:45 +0100
+
+pve-cluster (6.1-1) pve; urgency=medium
+
+ * allow one to set 'migrate' HA shutdown policy in datacenter.cfg
+
+ * change certificate lifetime to two years, some newer browsers complain on
+ longer lifetime
+
+ * mtunnel migration IP: allow the same IP to be configured multiple times,
+ fixes, among others, routed full-mesh setups
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 26 Nov 2019 15:09:58 +0100
+
+pve-cluster (6.0-9) pve; urgency=medium
+
+ * pvecm: fix weirdly spaced double-prompt for password on join
+
+ * fix #2479: use correct sub in create_conf
+
+ -- Proxmox Support Team <support@proxmox.com> Fri, 22 Nov 2019 16:30:21 +0100
+
+pve-cluster (6.0-8) pve; urgency=medium
+
+ * fix #1380: pvecm status: add general cluster information
+
+ * dc.conf: sort languages for easier finding one
+
+ * dc.conf: add missing entries to default language property (he, da)
+
+ * use PVE::Certificate to read fingerprint
+
+ * move CertCache to pve-manager
+
+ * datacenter.cfg: parse/print u2f property string
+
+ * split package into a pve-cluster/pmxcfs one and a perl modules library one
+
+ * pve-cluster.service: move pvecm call to pveproxy.service
+
+ -- Proxmox Support Team <support@proxmox.com> Mon, 18 Nov 2019 11:27:27 +0100
+
+pve-cluster (6.0-7) pve; urgency=medium
+
+ * pmxcfs: ensure dcdb returns correct buffer again on parsing the FUSE
+ message. Fixes a regression from 6.0-6.
+
+ -- Proxmox Support Team <support@proxmox.com> Mon, 02 Sep 2019 11:07:59 +0200
+
+pve-cluster (6.0-6) pve; urgency=medium
+
+ * pmxcfs: code cleanup to allow enabling additional, stricter, compiler
+ checks
+
+ * cfs-utils cluster_config_version: actually enforce config_length
+ when doing the regex match
+
+ * pmxcfs: get config properties: ensure we do not read beyond the in-memory
+ config
+
+ * pmxcfs server: fix off-by-one error when ensuring string NULL
+ termination
+
+ -- Proxmox Support Team <support@proxmox.com> Fri, 30 Aug 2019 14:45:19 +0200
+
+pve-cluster (6.0-5) pve; urgency=medium
+
+ * join: better error handling
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 7 Aug 2019 10:47:52 +0200
+
+pve-cluster (6.0-4) pve; urgency=medium
+
+ * Add functions to resolve hostnames and iterate corosync nodes
+
+ * Add qdevice status API endpoint
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 2 Jul 2019 11:18:49 +0200
+
+pve-cluster (6.0-3) pve; urgency=medium
+
+ * restore pvecm mtunnel for now
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 27 Jun 2019 11:17:05 +0200
+
+pve-cluster (6.0-2) pve; urgency=medium
+
+ * pmxcfs: workaround strange g_string_free behaviour in get guest cfg
+ properties:
+
+ * api: join info: we still get ring0_addr in nodelist
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 25 Jun 2019 12:29:56 +0200
+
+pve-cluster (6.0-1) pve; urgency=medium
+
+ * add generic data broadcast interface
+
+ * add get_guest_config_property IPCC method
+
+ * pvecm: remove mtunnel
+
+ * corosync config: add initial corosync 3 + kronosnet support
+
+ * add new corosync-link format and use for create and join
+
+ * corosync: allow one to set link priorities
+
+ -- Proxmox Support Team <support@proxmox.com> Fri, 14 Jun 2019 20:13:11 +0200
+
+pve-cluster (6.0-0+1) pve; urgency=medium
+
+ * update version for Debian Buster
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 21 May 2019 18:10:10 +0200
+
+pve-cluster (5.0-37) unstable; urgency=medium
+
+ * ipcc: increase restart grace period
+
+ * pmxcfs: allow read access for www-data to /run dir to let pveproxy
+ detect pmxcfs restarts
+
+ * fix #1777: join: assert that local nodename bound IP is configured
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 30 Apr 2019 13:58:42 +0000
+
+pve-cluster (5.0-36) unstable; urgency=medium
+
+ * datacenter: only print properties to string if not already done
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 10 Apr 2019 15:46:45 +0200
+
+pve-cluster (5.0-35) unstable; urgency=medium
+
+ * restart pve-cluster.service on failure
+
+ * add u2f configuration to datacenter.cfg
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 03 Apr 2019 13:37:03 +0200
+
+pve-cluster (5.0-34) unstable; urgency=medium
+
+ * fix #2049: avoid conflict with chrony service
+
+ * fix #1891: Add zsh command completion for pvecm
+
+ * allow to setup and remove qdevice for cluster with the pvecm CLI
+ tool
+
+ * mac_prefix: do not allow multicast prefixes
+
+ * cluster: use lock for legacy authkey generation
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 14 Mar 2019 09:34:16 +0100
+
+pve-cluster (5.0-33) unstable; urgency=medium
+
+ * add ha setting format string property to datacenter.cfg
+
+ -- Proxmox Support Team <support@proxmox.com> Mon, 07 Jan 2019 12:56:28 +0100
+
+pve-cluster (5.0-32) unstable; urgency=medium
+
+ * pmxcfs: add ceph.conf to observed files
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 20 Dec 2018 10:40:04 +0100
+
+pve-cluster (5.0-31) unstable; urgency=medium
+
+ * add 'for internal use' to description of addnode
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 29 Nov 2018 13:06:11 +0100
+
+pve-cluster (5.0-30) unstable; urgency=medium
+
+ * simplify buildsys: replace autotools with plain makefiles
+
+ * api/join: avoid using an IPv6 address as worker task ID
+
+ * Fix #1848: typo in PVE::Cluster::join()
+
+ * Fix #1849: typos: aquire -> acquire
+
+ * add missing languages to datacenter_schema
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 23 Aug 2018 13:59:49 +0200
+
+pve-cluster (5.0-29) unstable; urgency=medium
+
+ * fix #1843: always free certificate file after reading it
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 24 Jul 2018 11:16:07 +0200
+
+pve-cluster (5.0-28) unstable; urgency=medium
+
+ * pvecm updatecerts: run in fork and time out after 30 seconds
+
+ * use constants for IPC request types
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 03 Jul 2018 14:12:33 +0200
+
+pve-cluster (5.0-27) unstable; urgency=medium
+
+ * fix #1743: cluster create: default to ring0_addr for bindnet0
+
+ * api: allow cluster wide sys auditors to get join info
+
+ * add lock helper for ACME
+
+ -- Proxmox Support Team <support@proxmox.com> Fri, 04 May 2018 12:55:49 +0200
+
+pve-cluster (5.0-26) unstable; urgency=medium
+
+ * add 'xtermjs' as possible default console type option
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 24 Apr 2018 11:07:25 +0200
+
+pve-cluster (5.0-25) unstable; urgency=medium
+
+ * fix daemonization of pmxcfs to avoid races with other services and its own
+ post-start hook trying to communicate with it before it's ready
+
+ -- Proxmox Support Team <support@proxmox.com> Fri, 13 Apr 2018 13:48:19 +0200
+
+pve-cluster (5.0-24) unstable; urgency=medium
+
+ * fix #1723: cluster joining via the CLI
+
+ * create known_hosts symlink on join
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 11 Apr 2018 11:28:27 +0200
+
+pve-cluster (5.0-23) unstable; urgency=medium
+
+ * API/Cluster: autoflush STDOUT for join and create
+
+ * pvecm join: also default to resolved IP with use_ssh param
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 05 Apr 2018 12:24:49 +0200
+
+pve-cluster (5.0-22) unstable; urgency=medium
+
+ * fix tainted input in backup_cfs_database
+
+ * refactor backup_cfs_database
+
+ * cluster join: ensure updatecerts gets called on quorate cluster
+
+ * api: add fork worker ID for create and join
+
+ * pvecm: check if APIClient exception code is defined
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 13 Mar 2018 12:35:43 +0100
+
+pve-cluster (5.0-21) stable; urgency=medium
+
+ * datacenter.cfg: add bwlimit
+
+ * api/cluster: move addnode/delnode from CLI to API
+
+ * api/cluster/addnode: return cluster config and authkey
+
+ * api/cluster: add join endpoint
+
+ * pvecm add: use API by default to join cluster
+
+ * cluster create: restart corosync & pmxfs in one go
+
+ * api/cluster: move cluster create from CLI to API
+
+ * api/cluster: add endpoint to GET cluster join information
+
+ * use resolved IP address for ring0_addr as default
+
+ * lock locally on cluster create and join
+
+ * pvecm: add: create task log on cluster join
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 27 Feb 2018 09:56:14 +0100
+
+pve-cluster (5.0-20) stable; urgency=medium
+
+ * mtunnel: don't read extra files passed via the command line as input
+
+ * handle pmxcfs restarts in ipcc clients better
+
+ * pmxcfs: remove a now-unnecessary shutdown delay
+
+ * deprecate 'applet' console setting in datacenter.cfg, it now maps to
+ 'html5'
+
+ * order LRM before CRM in post-installation commands to improve single-node
+ behavior
+
+ -- Proxmox Support Team <support@proxmox.com> Mon, 22 Jan 2018 15:09:45 +0100
+
+pve-cluster (5.0-19) stable; urgency=medium
+
+ * pause older ha-manager versions during post install script to avoid fencing
+ issues
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 07 Dec 2017 15:17:26 +0100
+
+pve-cluster (5.0-18) stable; urgency=medium
+
+ * fix sysctl.d/pve.conf installation
+
+ * fix issues with updating datacenter.cfg with migration settings being used
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 07 Dec 2017 08:11:44 +0100
+
+pve-cluster (5.0-17) stable; urgency=medium
+
+ * handle Net::SSLeay errors correctly
+
+ * factor out reading a nodes ssl cert fingerprint
+
+ * setup_sshd_config: remove useless start_sshd parameter
+
+ * pvecm: add/delete: local lock & avoid problems on first node addition
+
+ * pvecm: check early if the deletion cannot work
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 28 Nov 2017 16:41:50 +0100
+
+pve-cluster (5.0-16) unstable; urgency=medium
+
+ * pvecm: cleanup modules
+
+ * buildsys: autogen debug package
+
+ * cleanup build and packaging system
+
+ * remove unused sysv init.d service file
+
+ * pve-cluster service: remove $DAEMON_OPTS and environment file
+
+ * fix #1566: do not setup ssh config in updatecerts call
+
+ * ssh helper: disable escape keys
+
+ * fix #1559: pmxcfs: add missing lock when dumping .rrd
+
+ * cfs_lock: address race where alarm triggers with lock acquired
+
+ * cfs_lock: always unlock after code was executed
+
+ -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 08:20:25 +0100
+
+pve-cluster (5.0-15) unstable; urgency=medium
+
+ * cluster: improve error handling when reading files
+
+ * cluster: cfs_update: option to die rather than warn
+
+ -- Proxmox Support Team <support@proxmox.com> Tue, 17 Oct 2017 15:06:22 +0200
+
+pve-cluster (5.0-14) unstable; urgency=medium
+
+ * fix #1504: abort in pmxcfs when opening a status file concurrently from
+ many processes
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 21 Sep 2017 14:19:17 +0200
+
+pve-cluster (5.0-13) unstable; urgency=medium
+
+ * fix #1472: fix rrd file path
+
+ * improve internal handling of corosync configuration
+
+ * pvecm: improve locking when adding or deleting cluster nodes
+
+ * improve message outputs on IPC errors
+
+ * update SSH cipher list
+
+ * fix a problem with the tasklist & log when there were many unusually long
+ task logs
+
+ * fix #1486: spelling mistakes in pmxcfs
+
+ -- Proxmox Support Team <support@proxmox.com> Thu, 21 Sep 2017 09:37:47 +0200
+
pve-cluster (5.0-12) unstable; urgency=medium
* ssh_merge_known_hosts: also add entry if current sshkey does not match