-linux-raspi2 (4.8.0-1006.6) UNRELEASED; urgency=low
+linux-raspi2 (4.8.0-1013.15) yakkety; urgency=low
- CHANGELOG: Do not edit directly. Autogenerated at release.
- CHANGELOG: Use the printchanges target to see the curent changes.
- CHANGELOG: Use the insertchanges target to create the final log.
+ [ Andy Whitcroft ]
+
+ * Rebase to Ubuntu-4.8.0-22.24
+
+ [ Ubuntu: 4.8.0-22.24 ]
+
+ * CVE-2016-7039 (LP: #1631287)
+ - SAUCE: net: add recursion limit to GRO
+
+ -- Andy Whitcroft <apw@canonical.com> Mon, 10 Oct 2016 11:24:33 +0100
+
+linux-raspi2 (4.8.0-1012.14) yakkety; urgency=low
+
+ [ Tim Gardner ]
+
+ * Release Tracking Bug
+ - LP: #1630339
+
+ * Rebase against Ubuntu-4.8.0-21.23
+
+ -- Tim Gardner <tim.gardner@canonical.com> Tue, 04 Oct 2016 11:57:45 -0600
+
+linux-raspi2 (4.8.0-1011.13) yakkety; urgency=low
+
+ [ Tim Gardner ]
+
+ * Release Tracking Bug
+ - LP: #1629751
+
+ * Rebase against Ubuntu-4.8.0-20.22 (v4.8)
+
+ -- Tim Gardner <tim.gardner@canonical.com> Sun, 02 Oct 2016 20:51:53 -0600
+
+linux-raspi2 (4.8.0-1010.12) yakkety; urgency=low
+
+ [ Tim Gardner ]
+
+ * Release Tracking Bug
+ - LP: #1629093
+
+ * Rebase against Ubuntu-4.8.0-19.21
+
+ * 4.8.0 kernels do not complete boot process on VM (LP: #1627198)
+ - [Config] CONFIG_HARDENED_USERCOPY_PAGESPAN=n
+
+ -- Tim Gardner <tim.gardner@canonical.com> Thu, 29 Sep 2016 13:37:03 -0600
+
+linux-raspi2 (4.8.0-1009.11) yakkety; urgency=low
+
+ [ Tim Gardner ]
+
+ * Release Tracking Bug
+ - LP: #1628132
+
+ * Enable the arm64 arch on Raspberry Pi (LP: #1628124)
+ - packaging: enable the arm64 bits
+ - [Config] import empty debian.raspi2/config/arm64/ config files
+ - [Config] updateconfigs
+ - annotations: remove ACPI_CUSTOM_METHOD
+ - [Config] REGULATOR_TWL4030=m
+ - [Config] GPIO_TWL4030=m
+ - annotations: remove HOTPLUG_PCI_PCIE
+ - annotations: remove EFI_VARS
+ - [Config] arm64: FTBFS, disable BCM_VC_SM
+ - [Config] arm64: FTBFS, disable BCM_VC_CMA
+ - [Config] arm64: FTBFS, disable BCM2708_VCHIQ
+ - [Config] arm64: FTBFS, disable USB_DWCOTG
+ - fix FTBFS rtl8192cu
+ - arm64: fails booting when KGDB_SERIAL_CONSOLE=y, disable it
+
+ -- Paolo Pisati <paolo.pisati@canonical.com> Tue, 27 Sep 2016 09:33:30 +0200
+
+linux-raspi2 (4.8.0-1008.10) yakkety; urgency=low
+
+ * Miscellaneous Ubuntu changes
+ - [Config] Conform to modern kernel-wedge layout
+ fixes FTBS
+
+ -- Tim Gardner <tim.gardner@canonical.com> Mon, 19 Sep 2016 13:32:38 -0600
+
+linux-raspi2 (4.8.0-1008.9) yakkety; urgency=low
+
+ [ Tim Gardner ]
+
+ * Release Tracking Bug
+ - LP: #1625249
+
+ * Miscellaneous Ubuntu changes
+ - [Config] CONFIG_SECURITY_APPARMOR_UNCONFINED_INIT=y
+
+ * Rebase against Ubuntu-4.8.0-12.13 (v4.8-rc7)
+
+ -- Tim Gardner <tim.gardner@canonical.com> Mon, 19 Sep 2016 09:51:42 -0600
+
+linux-raspi2 (4.8.0-1007.8) yakkety; urgency=low
+
+ * Miscellaneous Ubuntu changes
+ - [Config] updateconfigs after rebase to fix FTBS
+
+ -- Tim Gardner <tim.gardner@canonical.com> Thu, 15 Sep 2016 12:18:03 -0600
+
+linux-raspi2 (4.8.0-1007.7) yakkety; urgency=low
+
+ * rebase to Ubuntu-4.8.0-9.10 (v4.8-rc6)
+
+ -- Tim Gardner <tim.gardner@canonical.com> Thu, 15 Sep 2016 11:05:27 -0600
+
+linux-raspi2 (4.8.0-1006.6) yakkety; urgency=low
+
+ * Miscellaneous Ubuntu changes
+ - [Config] SERIAL_8250_BCM2835AUX=y
+
+ * Miscellaneous upstream changes
+ - config: Enable SERIAL_SC16IS7XX_SPI
+ - config: Add CONFIG_IPVLAN module
+ - config: Add CONFIG_VXLAN module
+ - Overlay for Microchip MCP23S08/17 SPI gpio expanders (#1566)
+ - BCM270X_DT: Add audio_pins to CM dtb
+ - BCM270X_DT: Don't enable UART0 in CM3 dtb
+ - overlays: Add audremap overlay
+ - overlays: Add swap_lr and enable_jack to audremap
+ - overlays: Clarify gpio-poweroff semantics in README
+ - overlays: added sc16is750 UART over I2C (#1617)
+ - irq-bcm2836/irq-bcm2836 - Fix arm64 portability/build issues.
+ - bcm2708-dmaengine - Fix arm64 portability/build issues
+ - Add arm64 configuration and device tree differences.
+ - kbuild: Ignore dtco targets when filtering symbols
+ - Fix page table corruption in bcm2835-sdhost driver. (#1620)
+ - snd-bcm2835: Use bcm2835_hw params in preallocate
+ - dwc_otg: Use kzalloc when suitable
+ - Fixes i2c_bcm2708: Write to FIFO correctly - v2 (#1574)
+ - suppress spurious messages
+ - Add #if for 3.14 kernel change (#87)
+ - Set dev_type to wlan
+ - Tentatively added support for more 8188CUS based devices.
+ - Add support for more 8188CUS and 8192CUS devices
+ - Add ProductId for the Netgear N150 - WNA1000M
+ - Fixes CONFIG_CONCURRENT_MODE CONFIG_MULTI_VIR_IFACES
+ - Fixes compatibility with 3.13
+ - Enables warning in the compiler and fixes some issues, reference =>
+ https://github.com/diederikdehaas/rtl8812AU
+ - Starts device in station mode instead of monitor, fixes NetworkManager
+ issues
+ - Enable cfg80211 support
+ - Fix cfg80211 for kernel >= 4.7
+ - Fixes rtl8192cu for kernel >= 4.8
+ - clk: bcm2835: Mark the VPU clock as critical
+ - clk: bcm2835: Mark GPIO clocks enabled at boot as critical.
+ - clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent
+ - clk: bcm2835: Mark the CM SDRAM clock's parent as critical
+ - Revert "bcm2835-i2s: Reduce the TX DREQ threshold"
+ - Revert "bcm2835-i2s: Enable MMAP support via a DT property"
+ - Revert "bcm2835-i2s: Register PCM device"
+ - Revert "bcm2835-i2s: Eliminate debugfs directory error"
+ - Revert "bcm2835-i2s: setup clock only if CPU is clock master"
+ - Revert "bcm2835-i2s: add 24bit support, update bclk_ratio to more correct
+ values"
+ - Revert "bcm2835-i2s: get base address for DMA from devicetree"
+ - Revert "Revert "ASoC: bcm2835: move to use the clock framework""
+ - Revert "Revert "ASoC: bcm2835: add 24bit support""
+ - Revert "Revert "ASoC: bcm2835: setup clock only if CPU is clock master""
+ - Revert "Revert "ASoC: bcm2835: Add S16_LE support via packed DMA transfers""
+ - ARM: bcm2708: enable clock manager by default
+ - ARM: 2708: i2s: removed clock registers and added clock
+ - ARM: bcm2708: use correct device-tree node names for serial
+ - ARM: bcm2708: moved uart0 to use new clock framework
+ - ARM: bcm2708: move spi0 to use new clock framework
+ - ARM: bcm2708: move i2c to use new clock framework
+ - ARM: bcm2708: move pwm to new clock framework
+ - ARM: bcm2708: fix auxiliar clock provider to use clock framework
+ - ARM: bcm2708: fix register range of spi-aux
+ - ARM: bcm2708: move to new clock manager and driver for aux-uart
+ - ARM: bcm2708: remove pwm clock
+ - MISC: bcm2835: smi: use clock manager and fix reload issues
+ - ARM: bcm2835: move smi to use clock framework
+ - ARM: bcm2708: move mmc to use clock framework
+ - ARM: bcm2708: move sdhost to use clock framework
+ - ARM: bcm2708: remove clk_core as it is no longer used
+ - Revert "bcm2835-i2s: Enable MMAP support via a DT property"
+ - CM3: ARM: bcm2708: moved uart0 to use new clock framework
+ - CM3: ARM: bcm2708: remove clk_core as it is no longer used
+ - overlays: Add assert_falling_edge to pps-gpio overlay
+ - bcm2835-sdhost: Don't exit cmd wait loop on error
+ - BCM270X_DT: Use bcm2835-sdhost on Compute Module
-- Paolo Pisati <paolo.pisati@canonical.com> Wed, 07 Sep 2016 13:18:49 +0200