]> git.proxmox.com Git - mirror_qemu.git/blobdiff - disas.c
sparc64 marge (Blue Swirl)
[mirror_qemu.git] / disas.c
diff --git a/disas.c b/disas.c
index 97c4a23a3fa144de75e132257a5a096ba87643ee..c54e5d91c08ceb077b13288045b89a693ca75df6 100644 (file)
--- a/disas.c
+++ b/disas.c
@@ -1,13 +1,15 @@
 /* General "disassemble this chunk" code.  Used for debugging. */
+#include "config.h"
 #include "dis-asm.h"
-#include "disas.h"
 #include "elf.h"
 #include <errno.h>
 
+#include "cpu.h"
+#include "exec-all.h"
+#include "disas.h"
+
 /* Filled in by elfload.c.  Simplistic, but will do for now. */
-unsigned int disas_num_syms;
-void *disas_symtab;
-const char *disas_strtab;
+struct syminfo *syminfos = NULL;
 
 /* Get LENGTH bytes from info's buffer, at target address memaddr.
    Transfer them to myaddr.  */
@@ -18,12 +20,27 @@ buffer_read_memory (memaddr, myaddr, length, info)
      int length;
      struct disassemble_info *info;
 {
-  if (memaddr < info->buffer_vma
-      || memaddr + length > info->buffer_vma + info->buffer_length)
-    /* Out of bounds.  Use EIO because GDB uses it.  */
-    return EIO;
-  memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
-  return 0;
+    if (memaddr < info->buffer_vma
+        || memaddr + length > info->buffer_vma + info->buffer_length)
+        /* Out of bounds.  Use EIO because GDB uses it.  */
+        return EIO;
+    memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
+    return 0;
+}
+
+/* Get LENGTH bytes from info's buffer, at target address memaddr.
+   Transfer them to myaddr.  */
+static int
+target_read_memory (bfd_vma memaddr,
+                    bfd_byte *myaddr,
+                    int length,
+                    struct disassemble_info *info)
+{
+    int i;
+    for(i = 0; i < length; i++) {
+        myaddr[i] = ldub_code(memaddr + i);
+    }
+    return 0;
 }
 
 /* Print an error message.  We can assume that this is in response to
@@ -41,7 +58,7 @@ perror_memory (status, memaddr, info)
     /* Actually, address between memaddr and memaddr + len was
        out of bounds.  */
     (*info->fprintf_func) (info->stream,
-                          "Address 0x%x is out of bounds.\n", memaddr);
+                          "Address 0x%llx is out of bounds.\n", memaddr);
 }
 
 /* This could be in a separate file, to save miniscule amounts of space
@@ -56,7 +73,7 @@ generic_print_address (addr, info)
      bfd_vma addr;
      struct disassemble_info *info;
 {
-  (*info->fprintf_func) (info->stream, "0x%x", addr);
+  (*info->fprintf_func) (info->stream, "0x%llx", addr);
 }
 
 /* Just return the given address.  */
@@ -91,10 +108,91 @@ bfd_vma bfd_getb32 (const bfd_byte *addr)
   return (bfd_vma) v;
 }
 
+#ifdef TARGET_ARM
+static int
+print_insn_thumb1(bfd_vma pc, disassemble_info *info)
+{
+  return print_insn_arm(pc | 1, info);
+}
+#endif
+
+/* Disassemble this for me please... (debugging). 'flags' has teh following
+   values:
+    i386 - nonzero means 16 bit code
+    arm  - nonzero means thumb code 
+    other targets - unused
+ */
+void target_disas(FILE *out, target_ulong code, target_ulong size, int flags)
+{
+    target_ulong pc;
+    int count;
+    struct disassemble_info disasm_info;
+    int (*print_insn)(bfd_vma pc, disassemble_info *info);
+
+    INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);
+
+    disasm_info.read_memory_func = target_read_memory;
+    disasm_info.buffer_vma = code;
+    disasm_info.buffer_length = size;
+
+#ifdef TARGET_WORDS_BIGENDIAN
+    disasm_info.endian = BFD_ENDIAN_BIG;
+#else
+    disasm_info.endian = BFD_ENDIAN_LITTLE;
+#endif
+#if defined(TARGET_I386)
+    if (flags == 2)
+        disasm_info.mach = bfd_mach_x86_64;
+    else if (flags == 1) 
+        disasm_info.mach = bfd_mach_i386_i8086;
+    else
+        disasm_info.mach = bfd_mach_i386_i386;
+    print_insn = print_insn_i386;
+#elif defined(TARGET_ARM)
+    if (flags)
+       print_insn = print_insn_thumb1;
+    else
+       print_insn = print_insn_arm;
+#elif defined(TARGET_SPARC)
+    print_insn = print_insn_sparc;
+#ifdef TARGET_SPARC64
+    disasm_info.mach = bfd_mach_sparc_v9b;
+#endif    
+#elif defined(TARGET_PPC)
+    if (cpu_single_env->msr[MSR_LE])
+        disasm_info.endian = BFD_ENDIAN_LITTLE;
+    print_insn = print_insn_ppc;
+#else
+    fprintf(out, "0x" TARGET_FMT_lx
+           ": Asm output not supported on this arch\n", code);
+    return;
+#endif
+
+    for (pc = code; pc < code + size; pc += count) {
+       fprintf(out, "0x" TARGET_FMT_lx ":  ", pc);
+       count = print_insn(pc, &disasm_info);
+#if 0
+        {
+            int i;
+            uint8_t b;
+            fprintf(out, " {");
+            for(i = 0; i < count; i++) {
+                target_read_memory(pc + i, &b, 1, &disasm_info);
+                fprintf(out, " %02x", b);
+            }
+            fprintf(out, " }");
+        }
+#endif
+       fprintf(out, "\n");
+       if (count < 0)
+           break;
+    }
+}
+
 /* Disassemble this for me please... (debugging). */
-void disas(FILE *out, void *code, unsigned long size, enum disas_type type)
+void disas(FILE *out, void *code, unsigned long size)
 {
-    uint8_t *pc;
+    unsigned long pc;
     int count;
     struct disassemble_info disasm_info;
     int (*print_insn)(bfd_vma pc, disassemble_info *info);
@@ -105,47 +203,40 @@ void disas(FILE *out, void *code, unsigned long size, enum disas_type type)
     disasm_info.buffer_vma = (unsigned long)code;
     disasm_info.buffer_length = size;
 
-    if (type == DISAS_TARGET) {
 #ifdef WORDS_BIGENDIAN
-       disasm_info.endian = BFD_ENDIAN_BIG;
+    disasm_info.endian = BFD_ENDIAN_BIG;
 #else
-       disasm_info.endian = BFD_ENDIAN_LITTLE;
+    disasm_info.endian = BFD_ENDIAN_LITTLE;
 #endif
-#ifdef __i386__
-       disasm_info.mach = bfd_mach_i386_i386;
-       print_insn = print_insn_i386;
+#if defined(__i386__)
+    disasm_info.mach = bfd_mach_i386_i386;
+    print_insn = print_insn_i386;
+#elif defined(__x86_64__)
+    disasm_info.mach = bfd_mach_x86_64;
+    print_insn = print_insn_i386;
 #elif defined(__powerpc__)
-       print_insn = print_insn_ppc;
+    print_insn = print_insn_ppc;
 #elif defined(__alpha__)
-       print_insn = print_insn_alpha;
+    print_insn = print_insn_alpha;
 #elif defined(__sparc__)
-       print_insn = print_insn_sparc;
+    print_insn = print_insn_sparc;
 #elif defined(__arm__) 
-        print_insn = print_insn_arm;
+    print_insn = print_insn_arm;
 #else
-       fprintf(out, "Asm output not supported on this arch\n");
-       return;
+    fprintf(out, "0x%lx: Asm output not supported on this arch\n",
+           (long) code);
+    return;
 #endif
-    } else {
-       /* Currently only source supported in x86. */
-       disasm_info.endian = BFD_ENDIAN_LITTLE;
-       if (type == DISAS_I386_I386)
-           disasm_info.mach = bfd_mach_i386_i386;
-       else
-           disasm_info.mach = bfd_mach_i386_i8086;
-       print_insn = print_insn_i386;
-    }
-
-    for (pc = code; pc < (uint8_t *)code + size; pc += count) {
-       fprintf(out, "0x%08lx:  ", (long)pc);
+    for (pc = (unsigned long)code; pc < (unsigned long)code + size; pc += count) {
+       fprintf(out, "0x%08lx:  ", pc);
 #ifdef __arm__
         /* since data are included in the code, it is better to
            display code data too */
-        if (type == DISAS_TARGET) {
+        if (is_host) {
             fprintf(out, "%08x  ", (int)bfd_getl32((const bfd_byte *)pc));
         }
 #endif
-       count = print_insn((unsigned long)pc, &disasm_info);
+       count = print_insn(pc, &disasm_info);
        fprintf(out, "\n");
        if (count < 0)
            break;
@@ -153,23 +244,107 @@ void disas(FILE *out, void *code, unsigned long size, enum disas_type type)
 }
 
 /* Look up symbol for debugging purpose.  Returns "" if unknown. */
-const char *lookup_symbol(void *orig_addr)
+const char *lookup_symbol(target_ulong orig_addr)
 {
     unsigned int i;
     /* Hack, because we know this is x86. */
-    Elf32_Sym *sym = disas_symtab;
-
-    for (i = 0; i < disas_num_syms; i++) {
-       if (sym[i].st_shndx == SHN_UNDEF
-           || sym[i].st_shndx >= SHN_LORESERVE)
-           continue;
+    Elf32_Sym *sym;
+    struct syminfo *s;
+    
+    for (s = syminfos; s; s = s->next) {
+       sym = s->disas_symtab;
+       for (i = 0; i < s->disas_num_syms; i++) {
+           if (sym[i].st_shndx == SHN_UNDEF
+               || sym[i].st_shndx >= SHN_LORESERVE)
+               continue;
 
-       if (ELF_ST_TYPE(sym[i].st_info) != STT_FUNC)
-           continue;
+           if (ELF_ST_TYPE(sym[i].st_info) != STT_FUNC)
+               continue;
 
-       if ((long)orig_addr >= sym[i].st_value
-           && (long)orig_addr < sym[i].st_value + sym[i].st_size)
-           return disas_strtab + sym[i].st_name;
+           if (orig_addr >= sym[i].st_value
+               && orig_addr < sym[i].st_value + sym[i].st_size)
+               return s->disas_strtab + sym[i].st_name;
+       }
     }
     return "";
 }
+
+#if !defined(CONFIG_USER_ONLY)
+
+void term_vprintf(const char *fmt, va_list ap);
+void term_printf(const char *fmt, ...);
+
+static int monitor_disas_is_physical;
+
+static int
+monitor_read_memory (memaddr, myaddr, length, info)
+     bfd_vma memaddr;
+     bfd_byte *myaddr;
+     int length;
+     struct disassemble_info *info;
+{
+    if (monitor_disas_is_physical) {
+        cpu_physical_memory_rw(memaddr, myaddr, length, 0);
+    } else {
+        cpu_memory_rw_debug(cpu_single_env, memaddr,myaddr, length, 0);
+    }
+    return 0;
+}
+
+static int monitor_fprintf(FILE *stream, const char *fmt, ...)
+{
+    va_list ap;
+    va_start(ap, fmt);
+    term_vprintf(fmt, ap);
+    va_end(ap);
+    return 0;
+}
+
+void monitor_disas(target_ulong pc, int nb_insn, int is_physical, int flags)
+{
+    int count, i;
+    struct disassemble_info disasm_info;
+    int (*print_insn)(bfd_vma pc, disassemble_info *info);
+
+    INIT_DISASSEMBLE_INFO(disasm_info, NULL, monitor_fprintf);
+
+    monitor_disas_is_physical = is_physical;
+    disasm_info.read_memory_func = monitor_read_memory;
+
+    disasm_info.buffer_vma = pc;
+
+#ifdef TARGET_WORDS_BIGENDIAN
+    disasm_info.endian = BFD_ENDIAN_BIG;
+#else
+    disasm_info.endian = BFD_ENDIAN_LITTLE;
+#endif
+#if defined(TARGET_I386)
+    if (flags == 2)
+        disasm_info.mach = bfd_mach_x86_64;
+    else if (flags == 1) 
+        disasm_info.mach = bfd_mach_i386_i8086;
+    else
+        disasm_info.mach = bfd_mach_i386_i386;
+    print_insn = print_insn_i386;
+#elif defined(TARGET_ARM)
+    print_insn = print_insn_arm;
+#elif defined(TARGET_SPARC)
+    print_insn = print_insn_sparc;
+#elif defined(TARGET_PPC)
+    print_insn = print_insn_ppc;
+#else
+    term_printf("0x" TARGET_FMT_lx
+               ": Asm output not supported on this arch\n", pc);
+    return;
+#endif
+
+    for(i = 0; i < nb_insn; i++) {
+       term_printf("0x" TARGET_FMT_lx ":  ", pc);
+       count = print_insn(pc, &disasm_info);
+       term_printf("\n");
+       if (count < 0)
+           break;
+        pc += count;
+    }
+}
+#endif