Please note that *zebra* must be invoked before *ripd*.
To stop *ripd*. Please use::
- kill `cat /var/run/ripd.pid`
+
+ kill `cat /var/run/frr/ripd.pid`
Certain signals have special meanings to *ripd*.
RIP Configuration
=================
-.. clicmd:: router rip
+.. clicmd:: router rip [vrf NAME]
The `router rip` command is necessary to enable RIP. To disable RIP, use the
`no router rip` command. RIP must be enabled before carrying out any of the
RIP commands.
-
- Disable RIP.
-
.. clicmd:: network NETWORK
The default is to be passive on all interfaces.
-.. clicmd:: ip split-horizon
+.. clicmd:: ip split-horizon [poisoned-reverse]
Control split-horizon on the interface. Default is `ip split-horizon`. If
you don't perform split-horizon on the interface, please specify `no ip
split-horizon`.
+ If `poisoned-reverse` is also set, the router sends the poisoned routes
+ with highest metric back to the sending router.
+
.. _rip-version-control:
RIP Version Control
.. clicmd:: version VERSION
- Set RIP version to accept for reads and send. ``VERSION`` can be either 1 or
- 1.
+ Set RIP version to accept for reads and send. VERSION can be either
+ ``1`` or ``2``.
Disabling RIPv1 by specifying version 2 is STRONGLY encouraged,
:ref:`rip-authentication`. This may become the default in a future release.
To display RIP routes.
-.. clicmd:: show ip rip
+.. clicmd:: show ip rip [vrf NAME]
Show RIP routes.
the tag information. This command will also display this information
for routes redistributed into RIP.
-.. clicmd:: show ip rip status
+.. clicmd:: show ip rip [vrf NAME] status
The command displays current RIP status. It includes RIP timer,
filtering, version, RIP enabled interface and RIP peer information.