- :clicmd:`export bgp|zebra route-map MAP-NAME`
- :clicmd:`export bgp|zebra no route-map`
-.. index:: exit-vnc
.. clicmd:: exit-vnc
Exit VNC configuration mode.
**At least one `nve-group` is mandatory for useful VNC operation.**
-.. index:: vnc nve-group NAME
.. clicmd:: vnc nve-group NAME
Enter VNC configuration mode for defining the NVE group `name`.
exit-vnc
-.. index:: vnc nve-group NAME
-.. clicmd:: no vnc nve-group NAME
+The following statements are valid in an NVE group definition:
- Delete the NVE group named `name`.
-
- The following statements are valid in an NVE group definition:
-
-.. index:: l2rd NVE-ID-VALUE
.. clicmd:: l2rd NVE-ID-VALUE
Set the value used to distinguish NVEs connected to the same physical
1-255, or it may be specified as `auto:vn`, which means to use the
least-significant octet of the originating NVE's VN address.
-.. index:: prefix vn|un A.B.C.D/M|X:X::X:X/M
.. clicmd:: prefix vn|un A.B.C.D/M|X:X::X:X/M
Specify the matching prefix for this NVE group by either virtual-network
These prefixes are used only for determining assignments of NVEs to NVE
Groups.
-.. index:: rd ROUTE-DISTINGUISHER
.. clicmd:: rd ROUTE-DISTINGUISHER
Specify the route distinguisher for routes advertised via BGP
`route-distinguisher` is configured, then the advertised RD is set to
``two-byte-autonomous-system-number=0:four-byte-integer=0``.
-.. index:: response-lifetime LIFETIME|infinite
.. clicmd:: response-lifetime LIFETIME|infinite
Specify the response lifetime, in seconds, to be included in RFP response
`response-lifetime` is configured, the value 3600 will be used. The maximum
response lifetime is 2147483647.
-.. index:: rt export RT-LIST
.. clicmd:: rt export RT-LIST
-.. index:: rt import RT-LIST
.. clicmd:: rt import RT-LIST
-.. index:: rt both RT-LIST
.. clicmd:: rt both RT-LIST
Specify route target import and export lists. `rt-list` is a
simultaneously, and is equivalent to `rt export `rt-list`` followed by
`rt import `rt-list``.
-.. index:: export bgp|zebra route-map MAP-NAME
.. clicmd:: export bgp|zebra route-map MAP-NAME
Specify that the named route-map should be applied to routes being exported
:ref:`configuring-export-of-routes-to-other-routing-protocols`. This item
is optional.
-.. index:: export bgp|zebra no route-map
.. clicmd:: export bgp|zebra no route-map
Specify that no route-map should be applied to routes being exported to bgp
:ref:`configuring-export-of-routes-to-other-routing-protocols`. This item
is optional.
-.. index:: export bgp|zebra ipv4|ipv6 prefix-list LIST-NAME
.. clicmd:: export bgp|zebra ipv4|ipv6 prefix-list LIST-NAME
Specify that the named prefix-list filter should be applied to routes being
:ref:`configuring-export-of-routes-to-other-routing-protocols`. This item
is optional.
-.. index:: export bgp|zebra no ipv4|ipv6 prefix-list
.. clicmd:: export bgp|zebra no ipv4|ipv6 prefix-list
Specify that no prefix-list filter should be applied to routes being
other NVE associated configuration information, notably RD, is not impacted by
L2 Group Configuration.
-.. index:: vnc l2-group NAME
.. clicmd:: vnc l2-group NAME
Enter VNC configuration mode for defining the L2 group `name`.
exit-vnc
-.. index:: vnc l2-group NAME
-.. clicmd:: no vnc l2-group NAME
Delete the L2 group named `name`.
The following statements are valid in a L2 group definition:
-.. index:: logical-network-id VALUE
.. clicmd:: logical-network-id VALUE
Define the Logical Network Identifier with a value in the range of
0-4294967295 that identifies the logical Ethernet segment.
-.. index:: labels LABEL-LIST
.. clicmd:: labels LABEL-LIST
-.. index:: labels LABEL-LIST
-.. clicmd:: no labels LABEL-LIST
Add or remove labels associated with the group. `label-list` is a
space separated list of label values in the range of 0-1048575.
-.. index:: rt import RT-TARGET
.. clicmd:: rt import RT-TARGET
-.. index:: rt export RT-TARGET
.. clicmd:: rt export RT-TARGET
-.. index:: rt both RT-TARGET
.. clicmd:: rt both RT-TARGET
Specify the route target import and export value associated with the group.
Redistribution Command Syntax
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. index:: vnc redistribute ipv4|ipv6 bgp|bgp-direct|ipv6 bgp-direct-to-nve-groups|connected|kernel|ospf|rip|static
.. clicmd:: vnc redistribute ipv4|ipv6 bgp|bgp-direct|ipv6 bgp-direct-to-nve-groups|connected|kernel|ospf|rip|static
-.. index:: vnc redistribute ipv4|ipv6 bgp-direct-to-nve-groups view VIEWNAME
.. clicmd:: vnc redistribute ipv4|ipv6 bgp-direct-to-nve-groups view VIEWNAME
-.. index:: vnc redistribute ipv4|ipv6 bgp|bgp-direct|bgp-direct-to-nve-groups|connected|kernel|ospf|rip|static
-.. clicmd:: no vnc redistribute ipv4|ipv6 bgp|bgp-direct|bgp-direct-to-nve-groups|connected|kernel|ospf|rip|static
Import (or do not import) prefixes from another routing protocols. Specify
both the address family to import (`ipv4` or `ipv6`) and the protocol
Prefixes from all other protocols (including `bgp`) are imported via the
`zebra` kernel routing process.
-.. index:: vnc redistribute mode plain|nve-group|resolve-nve
.. clicmd:: vnc redistribute mode plain|nve-group|resolve-nve
Redistribute routes from other protocols into VNC using the specified mode.
Not all combinations of modes and protocols are supported.
-.. index:: vnc redistribute nve-group GROUP-NAME
.. clicmd:: vnc redistribute nve-group GROUP-NAME
-.. index:: vnc redistribute nve-group GROUP-NAME
-.. clicmd:: no vnc redistribute nve-group GROUP-NAME
When using `nve-group` mode, assign (or do not assign) the NVE group
`group-name` to routes redistributed from another routing protocol.
prefix must be specified as a full-length (/32 for IPv4, /128 for IPv6)
prefix.
-.. index:: vnc redistribute lifetime LIFETIME|infinite
.. clicmd:: vnc redistribute lifetime LIFETIME|infinite
Assign a registration lifetime, either `lifetime` seconds or `infinite`, to
received via RFP registration messages from an NVE. `lifetime` can be any
integer between 1 and 4294967295, inclusive.
-.. index:: vnc redistribute resolve-nve roo-ec-local-admin 0-65536
.. clicmd:: vnc redistribute resolve-nve roo-ec-local-admin 0-65536
Assign a value to the local-administrator subfield used in the
redistribution modes `plain` and `resolve-nve`, and then only for routes
being redistributed from `bgp-direct`.
-.. index:: vnc redistribute bgp-direct (ipv4|ipv6) prefix-list LIST-NAME
.. clicmd:: vnc redistribute bgp-direct (ipv4|ipv6) prefix-list LIST-NAME
When redistributing `bgp-direct` routes,
specifies that the named prefix-list should be applied.
-.. index:: vnc redistribute bgp-direct no (ipv4|ipv6) prefix-list
.. clicmd:: vnc redistribute bgp-direct no (ipv4|ipv6) prefix-list
When redistributing `bgp-direct` routes,
specifies that no prefix-list should be applied.
-.. index:: vnc redistribute bgp-direct route-map MAP-NAME
.. clicmd:: vnc redistribute bgp-direct route-map MAP-NAME
When redistributing `bgp-direct` routes,
specifies that the named route-map should be applied.
-.. index:: vnc redistribute bgp-direct no route-map
.. clicmd:: vnc redistribute bgp-direct no route-map
When redistributing `bgp-direct` routes,
when VNC routes are exported to unicast BGP, the BGP configuration must include
a corresponding `redistribute vnc-direct` statement.
-.. index:: export bgp|zebra mode none|group-nve|registering-nve|ce
.. clicmd:: export bgp|zebra mode none|group-nve|registering-nve|ce
Specify how routes should be exported to bgp or zebra. If the mode is
The default for both bgp and zebra is mode `none`.
-.. index:: vnc export bgp|zebra group-nve group GROUP-NAME
.. clicmd:: vnc export bgp|zebra group-nve group GROUP-NAME
-.. index:: vnc export bgp|zebra group-nve no group GROUP-NAME
.. clicmd:: vnc export bgp|zebra group-nve no group GROUP-NAME
When export mode is `group-nve`, export (or do not export) prefixes from the
`local-next-hop` parameter is used to delete specific local nexthop
information.
-.. index:: clear vnc mac (\\*|xx:xx:xx:xx:xx:xx) virtual-network-identifier (\\*|(1-4294967295)) (\\*|[(vn|un) (A.B.C.D|X:X::X:X|\\*) [(un|vn) (A.B.C.D|X:X::X:X|\*)] [prefix (\\*|A.B.C.D/M|X:X::X:X/M)])
.. clicmd:: clear vnc mac (\*|xx:xx:xx:xx:xx:xx) virtual-network-identifier (\*|(1-4294967295)) (\*|[(vn|un) (A.B.C.D|X:X::X:X|\*) [(un|vn) (A.B.C.D|X:X::X:X|\*)] [prefix (\*|A.B.C.D/M|X:X::X:X/M)])
Delete mac forwarding information. Any or all of these parameters may be
wildcarded to (potentially) match more than one registration. The default
value for the `prefix` parameter is the wildcard value `*`.
-.. index:: clear vnc nve (\*|((vn|un) (A.B.C.D|X:X::X:X) [(un|vn) (A.B.C.D|X:X::X:X)]))
.. clicmd:: clear vnc nve (\*|((vn|un) (A.B.C.D|X:X::X:X) [(un|vn) (A.B.C.D|X:X::X:X)]))
Delete prefixes associated with the NVE specified by the given VN and UN
The following commands are used to clear and display Virtual Network Control
related information:
-.. index:: clear vnc counters
.. clicmd:: clear vnc counters
Reset the counter values stored by the NVA. Counter
values can be seen using the `show vnc` commands listed above. This
command is only available in `enable` mode.
-.. index:: show vnc summary
.. clicmd:: show vnc summary
Print counter values and other general information
about the NVA. Counter values can be reset
using the `clear vnc counters` command listed below.
-.. index:: show vnc nves
.. clicmd:: show vnc nves
-.. index:: show vnc nves vn|un ADDRESS
.. clicmd:: show vnc nves vn|un ADDRESS
Display the NVA's current clients. Specifying `address` limits the output to
communicated with the NVE, per-NVE summary counters and each NVE's addresses
will be displayed.
-.. index:: show vnc queries
.. clicmd:: show vnc queries
-.. index:: show vnc queries PREFIX
.. clicmd:: show vnc queries PREFIX
Display active Query information. Queries remain valid for the default
Query information is provided for each querying NVE, and includes the Query
Target and the time remaining before the information is removed.
-.. index:: show vnc registrations [all|local|remote|holddown|imported]
.. clicmd:: show vnc registrations [all|local|remote|holddown|imported]
-.. index:: show vnc registrations [all|local|remote|holddown|imported] PREFIX
.. clicmd:: show vnc registrations [all|local|remote|holddown|imported] PREFIX
Display local, remote, holddown, and/or imported registration information.
registrations, the amount of time remaining before the information is
removed.
-.. index:: show vnc responses [active|removed]
.. clicmd:: show vnc responses [active|removed]
-.. index:: show vnc responses [active|removed] PREFIX
.. clicmd:: show vnc responses [active|removed] PREFIX
Display all, active and/or removed response information which are
the administrative cost, the provided response lifetime and the time
remaining before the information is to be removed or will become inactive.
-.. index:: show memory vnc
.. clicmd:: show memory vnc
Print the number of memory items allocated by the NVA.
projects / mirror_frr.git / blobdiff