when using the KVM PIT. It still can be requested explicitly using
``-global kvm-pit.lost_tick_policy=delay``.
+``-drive secs=s``, ``-drive heads=h`` & ``-drive cyls=c`` (removed in 3.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The drive geometry should now be specified via
+``-device ...,drive=dr,cyls=c,heads=h,secs=s`` (together with
+``-drive if=none,id=dr,...``).
+
+``-drive serial=``, ``-drive trans=`` & ``-drive addr=`` (removed in 3.0)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``-device ...,drive=dr,serial=r,bios-chs-trans=t,addr=a`` instead
+(together with ``-drive if=none,id=dr,...``).
+
+``-net ...,vlan=x`` (removed in 3.0)
+''''''''''''''''''''''''''''''''''''
+
+The term "vlan" was very confusing for most users in this context (it's about
+specifying a hub ID, not about IEEE 802.1Q or something similar), so this
+has been removed. To connect one NIC frontend with a network backend, either
+use ``-nic ...`` (e.g. for on-board NICs) or use ``-netdev ...,id=n`` together
+with ``-device ...,netdev=n`` (for full control over pluggable NICs). To
+connect multiple NICs or network backends via a hub device (which is what
+vlan did), use ``-nic hubport,hubid=x,...`` or
+``-netdev hubport,id=n,hubid=x,...`` (with ``-device ...,netdev=n``) instead.
+
+``-no-kvm-irqchip`` (removed in 3.0)
+''''''''''''''''''''''''''''''''''''
+
+Use ``-machine kernel_irqchip=off`` instead.
+
+``-no-kvm-pit-reinjection`` (removed in 3.0)
+''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``-global kvm-pit.lost_tick_policy=discard`` instead.
+
+``-balloon`` (removed in 3.1)
+'''''''''''''''''''''''''''''
+
+The ``-balloon virtio`` option has been replaced by ``-device virtio-balloon``.
+The ``-balloon none`` option was a no-op and has no replacement.
+
+``-bootp`` (removed in 3.1)
+'''''''''''''''''''''''''''
+
+The ``-bootp /some/file`` argument is replaced by either
+``-netdev user,id=x,bootp=/some/file`` (for pluggable NICs, accompanied with
+``-device ...,netdev=x``), or ``-nic user,bootp=/some/file`` (for on-board NICs).
+The new syntax allows different settings to be provided per NIC.
+
+``-redir`` (removed in 3.1)
+'''''''''''''''''''''''''''
+
+The ``-redir [tcp|udp]:hostport:[guestaddr]:guestport`` option is replaced
+by either ``-netdev
+user,id=x,hostfwd=[tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport``
+(for pluggable NICs, accompanied with ``-device ...,netdev=x``) or by the option
+``-nic user,hostfwd=[tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport``
+(for on-board NICs). The new syntax allows different settings to be provided
+per NIC.
+
+``-smb`` (removed in 3.1)
+'''''''''''''''''''''''''
+
+The ``-smb /some/dir`` argument is replaced by either
+``-netdev user,id=x,smb=/some/dir`` (for pluggable NICs, accompanied with
+``-device ...,netdev=x``), or ``-nic user,smb=/some/dir`` (for on-board NICs).
+The new syntax allows different settings to be provided per NIC.
+
+``-tftp`` (removed in 3.1)
+''''''''''''''''''''''''''
+
+The ``-tftp /some/dir`` argument is replaced by either
+``-netdev user,id=x,tftp=/some/dir`` (for pluggable NICs, accompanied with
+``-device ...,netdev=x``), or ``-nic user,tftp=/some/dir`` (for embedded NICs).
+The new syntax allows different settings to be provided per NIC.
+
+``-localtime`` (removed in 3.1)
+'''''''''''''''''''''''''''''''
+
+Replaced by ``-rtc base=localtime``.
+
+``-nodefconfig`` (removed in 3.1)
+'''''''''''''''''''''''''''''''''
+
+Use ``-no-user-config`` instead.
+
+``-rtc-td-hack`` (removed in 3.1)
+'''''''''''''''''''''''''''''''''
+
+Use ``-rtc driftfix=slew`` instead.
+
+``-startdate`` (removed in 3.1)
+'''''''''''''''''''''''''''''''
+
+Replaced by ``-rtc base=date``.
+
+``-vnc ...,tls=...``, ``-vnc ...,x509=...`` & ``-vnc ...,x509verify=...`` (removed in 3.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The "tls-creds" option should be used instead to point to a "tls-creds-x509"
+object created using "-object".
+
+``-mem-path`` fallback to RAM (removed in 5.0)
+''''''''''''''''''''''''''''''''''''''''''''''
+
+If guest RAM allocation from file pointed by ``mem-path`` failed,
+QEMU was falling back to allocating from RAM, which might have resulted
+in unpredictable behavior since the backing file specified by the user
+as ignored. Currently, users are responsible for making sure the backing storage
+specified with ``-mem-path`` can actually provide the guest RAM configured with
+``-m`` and QEMU fails to start up if RAM allocation is unsuccessful.
+
``-net ...,name=...`` (removed in 5.1)
''''''''''''''''''''''''''''''''''''''
The ``name`` parameter of the ``-net`` option was a synonym
for the ``id`` parameter, which should now be used instead.
+``-numa node,mem=...`` (removed in 5.1)
+'''''''''''''''''''''''''''''''''''''''
+
+The parameter ``mem`` of ``-numa node`` was used to assign a part of guest RAM
+to a NUMA node. But when using it, it's impossible to manage a specified RAM
+chunk on the host side (like bind it to a host node, setting bind policy, ...),
+so the guest ends up with the fake NUMA configuration with suboptiomal
+performance.
+However since 2014 there is an alternative way to assign RAM to a NUMA node
+using parameter ``memdev``, which does the same as ``mem`` and adds
+means to actually manage node RAM on the host side. Use parameter ``memdev``
+with *memory-backend-ram* backend as replacement for parameter ``mem``
+to achieve the same fake NUMA effect or a properly configured
+*memory-backend-file* backend to actually benefit from NUMA configuration.
+New machine versions (since 5.1) will not accept the option but it will still
+work with old machine types. User can check the QAPI schema to see if the legacy
+option is supported by looking at MachineInfo::numa-mem-supported property.
+
+``-numa`` node (without memory specified) (removed in 5.2)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Splitting RAM by default between NUMA nodes had the same issues as ``mem``
+parameter with the difference that the role of the user plays QEMU using
+implicit generic or board specific splitting rule.
+Use ``memdev`` with *memory-backend-ram* backend or ``mem`` (if
+it's supported by used machine type) to define mapping explicitly instead.
+Users of existing VMs, wishing to preserve the same RAM distribution, should
+configure it explicitly using ``-numa node,memdev`` options. Current RAM
+distribution can be retrieved using HMP command ``info numa`` and if separate
+memory devices (pc|nv-dimm) are present use ``info memory-device`` and subtract
+device memory from output of ``info numa``.
+
+``-smp`` (invalid topologies) (removed in 5.2)
+''''''''''''''''''''''''''''''''''''''''''''''
+
+CPU topology properties should describe whole machine topology including
+possible CPUs.
+
+However, historically it was possible to start QEMU with an incorrect topology
+where *n* <= *sockets* * *cores* * *threads* < *maxcpus*,
+which could lead to an incorrect topology enumeration by the guest.
+Support for invalid topologies is removed, the user must ensure
+topologies described with -smp include all possible cpus, i.e.
+*sockets* * *cores* * *threads* = *maxcpus*.
+
+``-machine enforce-config-section=on|off`` (removed in 5.2)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The ``enforce-config-section`` property was replaced by the
+``-global migration.send-configuration={on|off}`` option.
+
``-no-kvm`` (removed in 5.2)
''''''''''''''''''''''''''''
The ``pretty=on|off`` switch has no effect for HMP monitors and
its use is rejected.
-``-drive file=json:{...{'driver':'file'}}`` (removed 6.0)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``-drive file=json:{...{'driver':'file'}}`` (removed in 6.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The 'file' driver for drives is no longer appropriate for character or host
devices and will only accept regular files (S_IFREG). The correct driver
QEMU 5.1 changes the default behaviour from ``-bios none`` to ``-bios default``
for the RISC-V ``virt`` machine and ``sifive_u`` machine.
+``-no-quit`` (removed in 7.0)
+'''''''''''''''''''''''''''''
+
+The ``-no-quit`` was a synonym for ``-display ...,window-close=off`` which
+should be used instead.
+
+``--enable-fips`` (removed in 7.1)
+''''''''''''''''''''''''''''''''''
+
+This option restricted usage of certain cryptographic algorithms when
+the host is operating in FIPS mode.
+
+If FIPS compliance is required, QEMU should be built with the ``libgcrypt``
+or ``gnutls`` library enabled as a cryptography provider.
+
+Neither the ``nettle`` library, or the built-in cryptography provider are
+supported on FIPS enabled hosts.
+
+``-writeconfig`` (removed in 7.1)
+'''''''''''''''''''''''''''''''''
+
+The ``-writeconfig`` option was not able to serialize the entire contents
+of the QEMU command line. It is thus considered a failed experiment
+and removed without a replacement.
+
+``loaded`` property of ``secret`` and ``secret_keyring`` objects (removed in 7.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The ``loaded=on`` option in the command line or QMP ``object-add`` either had
+no effect (if ``loaded`` was the last option) or caused options to be
+effectively ignored as if they were not given. The property is therefore
+useless and should simply be removed.
+
+``opened`` property of ``rng-*`` objects (removed in 7.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The ``opened=on`` option in the command line or QMP ``object-add`` either had
+no effect (if ``opened`` was the last option) or caused errors. The property
+is therefore useless and should simply be removed.
+
+``-display sdl,window_close=...`` (removed in 7.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``-display sdl,window-close=...`` instead (i.e. with a minus instead of
+an underscore between "window" and "close").
+
+``-alt-grab`` and ``-display sdl,alt_grab=on`` (removed in 7.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``-display sdl,grab-mod=lshift-lctrl-lalt`` instead.
+
+``-ctrl-grab`` and ``-display sdl,ctrl_grab=on`` (removed in 7.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``-display sdl,grab-mod=rctrl`` instead.
+
+``-sdl`` (removed in 7.1)
+'''''''''''''''''''''''''
+
+Use ``-display sdl`` instead.
+
+``-curses`` (removed in 7.1)
+''''''''''''''''''''''''''''
+
+Use ``-display curses`` instead.
+
+Creating sound card devices using ``-soundhw`` (removed in 7.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Sound card devices should be created using ``-device`` or ``-audio``.
+The exception is ``pcspk`` which can be activated using ``-machine
+pcspk-audiodev=<name>``.
+
+``-watchdog`` (since 7.2)
+'''''''''''''''''''''''''
+
+Use ``-device`` instead.
+
+Hexadecimal sizes with scaling multipliers (since 8.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Input parameters that take a size value should only use a size suffix
+(such as 'k' or 'M') when the base is written in decimal, and not when
+the value is hexadecimal. That is, '0x20M' should be written either as
+'32M' or as '0x2000000'.
+
+``-chardev`` backend aliases ``tty`` and ``parport`` (removed in 8.0)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+``tty`` and ``parport`` used to be aliases for ``serial`` and ``parallel``
+respectively. The actual backend names should be used instead.
+
+``-drive if=none`` for the sifive_u OTP device (removed in 8.0)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Use ``-drive if=pflash`` to configure the OTP device of the sifive_u
+RISC-V machine instead.
+
+
QEMU Machine Protocol (QMP) commands
------------------------------------
-``block-dirty-bitmap-add`` "autoload" parameter (removed in 4.2.0)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``block-dirty-bitmap-add`` "autoload" parameter (removed in 4.2)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The "autoload" parameter has been ignored since 2.12.0. All bitmaps
are automatically loaded from qcow2 images.
``change`` (removed in 6.0)
'''''''''''''''''''''''''''
-Use ``blockdev-change-medium`` or ``change-vnc-password`` instead.
+Use ``blockdev-change-medium`` or ``change-vnc-password`` or
+``display-update`` instead.
``query-events`` (removed in 6.0)
'''''''''''''''''''''''''''''''''
Specify the properties for the object as top-level arguments instead.
+``query-sgx`` return value member ``section-size`` (removed in 8.0)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Member ``section-size`` in the return value of ``query-sgx``
+was superseded by ``sections``.
+
+
+``query-sgx-capabilities`` return value member ``section-size`` (removed in 8.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Member ``section-size`` in the return value of ``query-sgx-capabilities``
+was superseded by ``sections``.
+
Human Monitor Protocol (HMP) commands
-------------------------------------
+``usb_add`` and ``usb_remove`` (removed in 2.12)
+''''''''''''''''''''''''''''''''''''''''''''''''
+
+Replaced by ``device_add`` and ``device_del`` (use ``device_add help`` for a
+list of available devices).
+
+``host_net_add`` and ``host_net_remove`` (removed in 2.12)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Replaced by ``netdev_add`` and ``netdev_del``.
+
The ``hub_id`` parameter of ``hostfwd_add`` / ``hostfwd_remove`` (removed in 5.0)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
''''''''''''''''''''''''''''''''''''''''''''''''''''''
The Linux kernel has dropped support for allowing 32-bit Arm systems
-to host KVM guests as of the 5.7 kernel. Accordingly, QEMU is deprecating
-its support for this configuration and will remove it in a future version.
-Running 32-bit guests on a 64-bit Arm host remains supported.
+to host KVM guests as of the 5.7 kernel, and was thus removed from QEMU
+as well. Running 32-bit guests on a 64-bit Arm host remains supported.
RISC-V ISA Specific CPUs (removed in 5.1)
'''''''''''''''''''''''''''''''''''''''''
available to make sure that the code is still working, so it has been removed
without replacement.
-``lm32`` CPUs (removed in 6.1.0)
-''''''''''''''''''''''''''''''''
+``lm32`` CPUs (removed in 6.1)
+''''''''''''''''''''''''''''''
The only public user of this architecture was the milkymist project,
which has been dead for years; there was never an upstream Linux
port. Removed without replacement.
-``unicore32`` CPUs (since 6.1.0)
-''''''''''''''''''''''''''''''''
+``unicore32`` CPUs (removed in 6.1)
+'''''''''''''''''''''''''''''''''''
Support for this CPU was removed from the upstream Linux kernel, and
there is no available upstream toolchain to build binaries for it.
Removed without replacement.
+x86 ``Icelake-Client`` CPU (removed in 7.1)
+'''''''''''''''''''''''''''''''''''''''''''
+
+There isn't ever Icelake Client CPU, it is some wrong and imaginary one.
+Use ``Icelake-Server`` instead.
+
+System accelerators
+-------------------
+
+Userspace local APIC with KVM (x86, removed 8.0)
+''''''''''''''''''''''''''''''''''''''''''''''''
+
+``-M kernel-irqchip=off`` cannot be used on KVM if the CPU model includes
+a local APIC. The ``split`` setting is supported, as is using ``-M
+kernel-irqchip=off`` when the CPU does not have a local APIC.
+
+System accelerators
+-------------------
+
+MIPS "Trap-and-Emulate" KVM support (removed in 8.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The MIPS "Trap-and-Emulate" KVM host and guest support was removed
+from Linux in 2021, and is not supported anymore by QEMU either.
+
System emulator machines
------------------------
+``s390-virtio`` (removed in 2.6)
+''''''''''''''''''''''''''''''''
+
+Use the ``s390-ccw-virtio`` machine instead.
+
+The m68k ``dummy`` machine (removed in 2.9)
+'''''''''''''''''''''''''''''''''''''''''''
+
+Use the ``none`` machine with the ``loader`` device instead.
+
+``xlnx-ep108`` (removed in 3.0)
+'''''''''''''''''''''''''''''''
+
+The EP108 was an early access development board that is no longer used.
+Use the ``xlnx-zcu102`` machine instead.
+
``spike_v1.9.1`` and ``spike_v1.10`` (removed in 5.1)
'''''''''''''''''''''''''''''''''''''''''''''''''''''
This machine has been renamed ``fuloong2e``.
-``pc-1.0``, ``pc-1.1``, ``pc-1.2`` and ``pc-1.3`` (removed in 6.0)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``pc-0.10`` up to ``pc-1.3`` (removed in 4.0 up to 6.0)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''
These machine types were very old and likely could not be used for live
migration from old QEMU versions anymore. Use a newer machine type instead.
+Raspberry Pi ``raspi2`` and ``raspi3`` machines (removed in 6.2)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The Raspberry Pi machines come in various models (A, A+, B, B+). To be able
+to distinguish which model QEMU is implementing, the ``raspi2`` and ``raspi3``
+machines have been renamed ``raspi2b`` and ``raspi3b``.
+
+Aspeed ``swift-bmc`` machine (removed in 7.0)
+'''''''''''''''''''''''''''''''''''''''''''''
+
+This machine was removed because it was unused. Alternative AST2500 based
+OpenPOWER machines are ``witherspoon-bmc`` and ``romulus-bmc``.
+
+ppc ``taihu`` machine (removed in 7.2)
+'''''''''''''''''''''''''''''''''''''''''''''
+
+This machine was removed because it was partially emulated and 405
+machines are very similar. Use the ``ref405ep`` machine instead.
linux-user mode CPUs
--------------------
there is no new Linux development taking place with this architecture. For
running the old binaries, you can use older versions of QEMU.
+``ppc64abi32`` CPUs (removed in 7.0)
+''''''''''''''''''''''''''''''''''''
+
+The ``ppc64abi32`` architecture has a number of issues which regularly
+tripped up the CI testing and was suspected to be quite broken. For that
+reason the maintainers strongly suspected no one actually used it.
+
+
+TCG introspection features
+--------------------------
+
+TCG trace-events (since 6.2)
+''''''''''''''''''''''''''''
+
+The ability to add new TCG trace points had bit rotted and as the
+feature can be replicated with TCG plugins it was removed. If
+any user is currently using this feature and needs help with
+converting to using TCG plugins they should contact the qemu-devel
+mailing list.
+
+
System emulator devices
-----------------------
+``spapr-pci-vfio-host-bridge`` (removed in 2.12)
+'''''''''''''''''''''''''''''''''''''''''''''''''
+
+The ``spapr-pci-vfio-host-bridge`` device type has been replaced by the
+``spapr-pci-host-bridge`` device type.
+
+``ivshmem`` (removed in 4.0)
+''''''''''''''''''''''''''''
+
+Replaced by either the ``ivshmem-plain`` or ``ivshmem-doorbell``.
+
``ide-drive`` (removed in 6.0)
''''''''''''''''''''''''''''''
backing file is missing or an incorrect format was specified) is an
error when ``-u`` is not used.
-Command line options
---------------------
-
-``-smp`` (invalid topologies) (removed 5.2)
-'''''''''''''''''''''''''''''''''''''''''''
-
-CPU topology properties should describe whole machine topology including
-possible CPUs.
-
-However, historically it was possible to start QEMU with an incorrect topology
-where *n* <= *sockets* * *cores* * *threads* < *maxcpus*,
-which could lead to an incorrect topology enumeration by the guest.
-Support for invalid topologies is removed, the user must ensure
-topologies described with -smp include all possible cpus, i.e.
-*sockets* * *cores* * *threads* = *maxcpus*.
-
-``-numa`` node (without memory specified) (removed 5.2)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''
-
-Splitting RAM by default between NUMA nodes had the same issues as ``mem``
-parameter with the difference that the role of the user plays QEMU using
-implicit generic or board specific splitting rule.
-Use ``memdev`` with *memory-backend-ram* backend or ``mem`` (if
-it's supported by used machine type) to define mapping explicitly instead.
-Users of existing VMs, wishing to preserve the same RAM distribution, should
-configure it explicitly using ``-numa node,memdev`` options. Current RAM
-distribution can be retrieved using HMP command ``info numa`` and if separate
-memory devices (pc|nv-dimm) are present use ``info memory-device`` and subtract
-device memory from output of ``info numa``.
-
-``-numa node,mem=``\ *size* (removed in 5.1)
-''''''''''''''''''''''''''''''''''''''''''''
-
-The parameter ``mem`` of ``-numa node`` was used to assign a part of
-guest RAM to a NUMA node. But when using it, it's impossible to manage a specified
-RAM chunk on the host side (like bind it to a host node, setting bind policy, ...),
-so the guest ends up with the fake NUMA configuration with suboptiomal performance.
-However since 2014 there is an alternative way to assign RAM to a NUMA node
-using parameter ``memdev``, which does the same as ``mem`` and adds
-means to actually manage node RAM on the host side. Use parameter ``memdev``
-with *memory-backend-ram* backend as replacement for parameter ``mem``
-to achieve the same fake NUMA effect or a properly configured
-*memory-backend-file* backend to actually benefit from NUMA configuration.
-New machine versions (since 5.1) will not accept the option but it will still
-work with old machine types. User can check the QAPI schema to see if the legacy
-option is supported by looking at MachineInfo::numa-mem-supported property.
-
-``-mem-path`` fallback to RAM (removed in 5.0)
-''''''''''''''''''''''''''''''''''''''''''''''
-
-If guest RAM allocation from file pointed by ``mem-path`` failed,
-QEMU was falling back to allocating from RAM, which might have resulted
-in unpredictable behavior since the backing file specified by the user
-as ignored. Currently, users are responsible for making sure the backing storage
-specified with ``-mem-path`` can actually provide the guest RAM configured with
-``-m`` and QEMU fails to start up if RAM allocation is unsuccessful.
-
-``-smp`` (invalid topologies) (removed 5.2)
-'''''''''''''''''''''''''''''''''''''''''''
-
-CPU topology properties should describe whole machine topology including
-possible CPUs.
-
-However, historically it was possible to start QEMU with an incorrect topology
-where *n* <= *sockets* * *cores* * *threads* < *maxcpus*,
-which could lead to an incorrect topology enumeration by the guest.
-Support for invalid topologies is removed, the user must ensure
-topologies described with -smp include all possible cpus, i.e.
-*sockets* * *cores* * *threads* = *maxcpus*.
-
-``-machine enforce-config-section=on|off`` (removed 5.2)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-
-The ``enforce-config-section`` property was replaced by the
-``-global migration.send-configuration={on|off}`` option.
-
-qemu-img amend to adjust backing file (removed in 6.1)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``qemu-img amend`` to adjust backing file (removed in 6.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The use of ``qemu-img amend`` to modify the name or format of a qcow2
backing image was never fully documented or tested, and interferes
before or after the remaining changes being performed by amend, as
appropriate.
-qemu-img backing file without format (removed in 6.1)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''
+``qemu-img`` backing file without format (removed in 6.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The use of ``qemu-img create``, ``qemu-img rebase``, or ``qemu-img
convert`` to create or modify an image that depends on a backing file
projects / mirror_qemu.git / blobdiff