"data": { "actual": 944766976 },
"timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
-BLOCK_IMAGE_CORRUPTED
----------------------
-
-Emitted when a disk image is being marked corrupt.
-
-Data:
-
-- "device": Device name (json-string)
-- "msg": Informative message (e.g., reason for the corruption) (json-string)
-- "offset": If the corruption resulted from an image access, this is the access
- offset into the image (json-int)
-- "size": If the corruption resulted from an image access, this is the access
- size (json-int)
-
-Example:
-
-{ "event": "BLOCK_IMAGE_CORRUPTED",
- "data": { "device": "ide0-hd0",
- "msg": "Prevented active L1 table overwrite", "offset": 196608,
- "size": 65536 },
- "timestamp": { "seconds": 1378126126, "microseconds": 966463 } }
-
-BLOCK_IO_ERROR
---------------
-
-Emitted when a disk I/O error occurs.
-
-Data:
-
-- "device": device name (json-string)
-- "operation": I/O operation (json-string, "read" or "write")
-- "action": action that has been taken, it's one of the following (json-string):
- "ignore": error has been ignored
- "report": error has been reported to the device
- "stop": the VM is going to stop because of the error
-
-Example:
-
-{ "event": "BLOCK_IO_ERROR",
- "data": { "device": "ide0-hd1",
- "operation": "write",
- "action": "stop" },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-Note: If action is "stop", a STOP event will eventually follow the
-BLOCK_IO_ERROR event.
-
-BLOCK_JOB_CANCELLED
--------------------
-
-Emitted when a block job has been cancelled.
-
-Data:
-
-- "type": Job type (json-string; "stream" for image streaming
- "commit" for block commit)
-- "device": Device name (json-string)
-- "len": Maximum progress value (json-int)
-- "offset": Current progress value (json-int)
- On success this is equal to len.
- On failure this is less than len.
-- "speed": Rate limit, bytes per second (json-int)
-
-Example:
-
-{ "event": "BLOCK_JOB_CANCELLED",
- "data": { "type": "stream", "device": "virtio-disk0",
- "len": 10737418240, "offset": 134217728,
- "speed": 0 },
- "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-
-BLOCK_JOB_COMPLETED
--------------------
-
-Emitted when a block job has completed.
-
-Data:
-
-- "type": Job type (json-string; "stream" for image streaming
- "commit" for block commit)
-- "device": Device name (json-string)
-- "len": Maximum progress value (json-int)
-- "offset": Current progress value (json-int)
- On success this is equal to len.
- On failure this is less than len.
-- "speed": Rate limit, bytes per second (json-int)
-- "error": Error message (json-string, optional)
- Only present on failure. This field contains a human-readable
- error message. There are no semantics other than that streaming
- has failed and clients should not try to interpret the error
- string.
-
-Example:
-
-{ "event": "BLOCK_JOB_COMPLETED",
- "data": { "type": "stream", "device": "virtio-disk0",
- "len": 10737418240, "offset": 10737418240,
- "speed": 0 },
- "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-
-BLOCK_JOB_ERROR
----------------
-
-Emitted when a block job encounters an error.
-
-Data:
-
-- "device": device name (json-string)
-- "operation": I/O operation (json-string, "read" or "write")
-- "action": action that has been taken, it's one of the following (json-string):
- "ignore": error has been ignored, the job may fail later
- "report": error will be reported and the job canceled
- "stop": error caused job to be paused
-
-Example:
-
-{ "event": "BLOCK_JOB_ERROR",
- "data": { "device": "ide0-hd1",
- "operation": "write",
- "action": "stop" },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-BLOCK_JOB_READY
----------------
-
-Emitted when a block job is ready to complete.
-
-Data:
-
-- "device": device name (json-string)
-
-Example:
-
-{ "event": "BLOCK_JOB_READY",
- "data": { "device": "ide0-hd1" },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-Note: The "ready to complete" status is always reset by a BLOCK_JOB_ERROR
-event.
-
-DEVICE_DELETED
---------------
-
-Emitted whenever the device removal completion is acknowledged
-by the guest.
-At this point, it's safe to reuse the specified device ID.
-Device removal can be initiated by the guest or by HMP/QMP commands.
-
-Data:
-
-- "device": device name (json-string, optional)
-- "path": device path (json-string)
-
-{ "event": "DEVICE_DELETED",
- "data": { "device": "virtio-net-pci-0",
- "path": "/machine/peripheral/virtio-net-pci-0" },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-DEVICE_TRAY_MOVED
------------------
-
-It's emitted whenever the tray of a removable device is moved by the guest
-or by HMP/QMP commands.
-
-Data:
-
-- "device": device name (json-string)
-- "tray-open": true if the tray has been opened or false if it has been closed
- (json-bool)
-
-{ "event": "DEVICE_TRAY_MOVED",
- "data": { "device": "ide1-cd0",
- "tray-open": true
- },
- "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
GUEST_PANICKED
--------------
"data": { "node-name": "1.raw", "sector-num": 345435, "sector-count": 5 },
"timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
-RTC_CHANGE
-----------
-
-Emitted when the guest changes the RTC time.
-
-Data:
-
-- "offset": Offset between base RTC clock (as specified by -rtc base), and
-new RTC clock value (json-number)
-
-Example:
-
-{ "event": "RTC_CHANGE",
- "data": { "offset": 78 },
- "timestamp": { "seconds": 1267020223, "microseconds": 435656 } }
-
SPICE_CONNECTED, SPICE_DISCONNECTED
-----------------------------------
"client": { "family": "ipv4", "service": "46089",
"host": "127.0.0.1", "sasl_username": "luiz" } },
"timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
-
-WAKEUP
-------
-
-Emitted when the guest has woken up from S3 and is running.
-
-Data: None.
-
-Example:
-
-{ "event": "WAKEUP",
- "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
-
-WATCHDOG
---------
-
-Emitted when the watchdog device's timer is expired.
-
-Data:
-
-- "action": Action that has been taken, it's one of the following (json-string):
- "reset", "shutdown", "poweroff", "pause", "debug", or "none"
-
-Example:
-
-{ "event": "WATCHDOG",
- "data": { "action": "reset" },
- "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-
-Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is
-followed respectively by the RESET, SHUTDOWN, or STOP events.
projects / mirror_qemu.git / blobdiff