Running U-Boot
--------------
-U-Boot mainline v2021.07 release is tested at the time of writing. To build a
+U-Boot mainline v2024.01 release is tested at the time of writing. To build a
U-Boot mainline bootloader that can be booted by the ``sifive_u`` machine, use
the sifive_unleashed_defconfig with similar commands as described above for
Linux:
$ export CROSS_COMPILE=riscv64-linux-
$ make sifive_unleashed_defconfig
- $ make menuconfig
-
-then manually select the following configuration:
-
- * Device Tree Control ---> Provider of DTB for DT Control ---> Prior Stage bootloader DTB
-
-and unselect the following configuration:
-
- * Library routines ---> Allow access to binman information in the device tree
+ $ ./scripts/config --enable OF_BOARD
+ $ ./scripts/config --disable BINMAN_FDT
+ $ ./scripts/config --disable SPL
+ $ make olddefconfig
This changes U-Boot to use the QEMU generated device tree blob, and bypass
running the U-Boot SPL stage.
$ export CROSS_COMPILE=riscv64-linux-
$ make sifive_unleashed_defconfig
- $ make menuconfig
-
-then manually update the following configuration in U-Boot:
-
- * Device Tree Control ---> Provider of DTB for DT Control ---> Prior Stage bootloader DTB
- * RISC-V architecture ---> Base ISA ---> RV32I
- * Boot options ---> Boot images ---> Text Base ---> 0x80400000
-
-and unselect the following configuration:
-
- * Library routines ---> Allow access to binman information in the device tree
+ $ ./scripts/config --disable ARCH_RV64I
+ $ ./scripts/config --enable ARCH_RV32I
+ $ ./scripts/config --set-val TEXT_BASE 0x80400000
+ $ ./scripts/config --enable OF_BOARD
+ $ ./scripts/config --disable BINMAN_FDT
+ $ ./scripts/config --disable SPL
+ $ make olddefconfig
Use the same command line options to boot the 32-bit U-Boot S-mode image: