* Return: voltage in micro volt corresponding to the opp, else
* return 0
*
+ * This is useful only for devices with single power supply.
+ *
* Locking: This function must be called under rcu_read_lock(). opp is a rcu
* protected pointer. This means that opp which could have been fetched by
* opp_find_freq_{exact,ceil,floor} functions is valid as long as we are
if (IS_ERR_OR_NULL(tmp_opp))
pr_err("%s: Invalid parameters\n", __func__);
else
- v = tmp_opp->u_volt;
+ v = tmp_opp->supplies[0].u_volt;
return v;
}
}
EXPORT_SYMBOL_GPL(dev_pm_opp_get_max_clock_latency);
+static int _get_regulator_count(struct device *dev)
+{
+ struct opp_table *opp_table;
+ int count;
+
+ rcu_read_lock();
+
+ opp_table = _find_opp_table(dev);
+ if (!IS_ERR(opp_table))
+ count = opp_table->regulator_count;
+ else
+ count = 0;
+
+ rcu_read_unlock();
+
+ return count;
+}
+
/**
* dev_pm_opp_get_max_volt_latency() - Get max voltage latency in nanoseconds
* @dev: device for which we do this operation
{
struct opp_table *opp_table;
struct dev_pm_opp *opp;
- struct regulator *reg;
+ struct regulator *reg, **regulators;
unsigned long latency_ns = 0;
- unsigned long min_uV = ~0, max_uV = 0;
- int ret;
+ int ret, i, count;
+ struct {
+ unsigned long min;
+ unsigned long max;
+ } *uV;
+
+ count = _get_regulator_count(dev);
+
+ /* Regulator may not be required for the device */
+ if (!count)
+ return 0;
+
+ regulators = kmalloc_array(count, sizeof(*regulators), GFP_KERNEL);
+ if (!regulators)
+ return 0;
+
+ uV = kmalloc_array(count, sizeof(*uV), GFP_KERNEL);
+ if (!uV)
+ goto free_regulators;
rcu_read_lock();
opp_table = _find_opp_table(dev);
if (IS_ERR(opp_table)) {
rcu_read_unlock();
- return 0;
+ goto free_uV;
}
- reg = opp_table->regulator;
- if (IS_ERR(reg)) {
- /* Regulator may not be required for device */
- rcu_read_unlock();
- return 0;
- }
+ memcpy(regulators, opp_table->regulators, count * sizeof(*regulators));
- list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
- if (!opp->available)
- continue;
+ for (i = 0; i < count; i++) {
+ uV[i].min = ~0;
+ uV[i].max = 0;
- if (opp->u_volt_min < min_uV)
- min_uV = opp->u_volt_min;
- if (opp->u_volt_max > max_uV)
- max_uV = opp->u_volt_max;
+ list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
+ if (!opp->available)
+ continue;
+
+ if (opp->supplies[i].u_volt_min < uV[i].min)
+ uV[i].min = opp->supplies[i].u_volt_min;
+ if (opp->supplies[i].u_volt_max > uV[i].max)
+ uV[i].max = opp->supplies[i].u_volt_max;
+ }
}
rcu_read_unlock();
* The caller needs to ensure that opp_table (and hence the regulator)
* isn't freed, while we are executing this routine.
*/
- ret = regulator_set_voltage_time(reg, min_uV, max_uV);
- if (ret > 0)
- latency_ns = ret * 1000;
+ for (i = 0; reg = regulators[i], i < count; i++) {
+ ret = regulator_set_voltage_time(reg, uV[i].min, uV[i].max);
+ if (ret > 0)
+ latency_ns += ret * 1000;
+ }
+
+free_uV:
+ kfree(uV);
+free_regulators:
+ kfree(regulators);
return latency_ns;
}
}
static int _set_opp_voltage(struct device *dev, struct regulator *reg,
- unsigned long u_volt, unsigned long u_volt_min,
- unsigned long u_volt_max)
+ struct dev_pm_opp_supply *supply)
{
int ret;
return 0;
}
- dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min,
- u_volt, u_volt_max);
+ dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__,
+ supply->u_volt_min, supply->u_volt, supply->u_volt_max);
- ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt,
- u_volt_max);
+ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
+ supply->u_volt, supply->u_volt_max);
if (ret)
dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n",
- __func__, u_volt_min, u_volt, u_volt_max, ret);
+ __func__, supply->u_volt_min, supply->u_volt,
+ supply->u_volt_max, ret);
return ret;
}
{
struct opp_table *opp_table;
struct dev_pm_opp *old_opp, *opp;
- struct regulator *reg;
+ struct regulator *reg = ERR_PTR(-ENXIO);
struct clk *clk;
unsigned long freq, old_freq;
- unsigned long u_volt, u_volt_min, u_volt_max;
+ struct dev_pm_opp_supply old_supply, new_supply;
int ret;
if (unlikely(!target_freq)) {
return ret;
}
- u_volt = opp->u_volt;
- u_volt_min = opp->u_volt_min;
- u_volt_max = opp->u_volt_max;
+ if (opp_table->regulators) {
+ /* This function only supports single regulator per device */
+ if (WARN_ON(opp_table->regulator_count > 1)) {
+ dev_err(dev, "multiple regulators not supported\n");
+ rcu_read_unlock();
+ return -EINVAL;
+ }
+
+ reg = opp_table->regulators[0];
+ }
+
+ if (IS_ERR(old_opp))
+ old_supply.u_volt = 0;
+ else
+ memcpy(&old_supply, old_opp->supplies, sizeof(old_supply));
- reg = opp_table->regulator;
+ memcpy(&new_supply, opp->supplies, sizeof(new_supply));
rcu_read_unlock();
/* Scaling up? Scale voltage before frequency */
if (freq > old_freq) {
- ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
- u_volt_max);
+ ret = _set_opp_voltage(dev, reg, &new_supply);
if (ret)
goto restore_voltage;
}
/* Scaling down? Scale voltage after frequency */
if (freq < old_freq) {
- ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min,
- u_volt_max);
+ ret = _set_opp_voltage(dev, reg, &new_supply);
if (ret)
goto restore_freq;
}
__func__, old_freq);
restore_voltage:
/* This shouldn't harm even if the voltages weren't updated earlier */
- if (!IS_ERR(old_opp))
- _set_opp_voltage(dev, reg, old_opp->u_volt,
- old_opp->u_volt_min, old_opp->u_volt_max);
+ if (old_supply.u_volt)
+ _set_opp_voltage(dev, reg, &old_supply);
return ret;
}
_of_init_opp_table(opp_table, dev);
- /* Set regulator to a non-NULL error value */
- opp_table->regulator = ERR_PTR(-ENXIO);
-
/* Find clk for the device */
opp_table->clk = clk_get(dev, NULL);
if (IS_ERR(opp_table->clk)) {
if (opp_table->prop_name)
return;
- if (!IS_ERR(opp_table->regulator))
+ if (opp_table->regulators)
return;
/* Release clk */
struct opp_table **opp_table)
{
struct dev_pm_opp *opp;
+ int count, supply_size;
+ struct opp_table *table;
- /* allocate new OPP node */
- opp = kzalloc(sizeof(*opp), GFP_KERNEL);
- if (!opp)
+ table = _add_opp_table(dev);
+ if (!table)
return NULL;
- INIT_LIST_HEAD(&opp->node);
+ /* Allocate space for at least one supply */
+ count = table->regulator_count ? table->regulator_count : 1;
+ supply_size = sizeof(*opp->supplies) * count;
- *opp_table = _add_opp_table(dev);
- if (!*opp_table) {
- kfree(opp);
+ /* allocate new OPP node and supplies structures */
+ opp = kzalloc(sizeof(*opp) + supply_size, GFP_KERNEL);
+ if (!opp) {
+ kfree(table);
return NULL;
}
+ /* Put the supplies at the end of the OPP structure as an empty array */
+ opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);
+ INIT_LIST_HEAD(&opp->node);
+
+ *opp_table = table;
+
return opp;
}
static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
struct opp_table *opp_table)
{
- struct regulator *reg = opp_table->regulator;
-
- if (!IS_ERR(reg) &&
- !regulator_is_supported_voltage(reg, opp->u_volt_min,
- opp->u_volt_max)) {
- pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
- __func__, opp->u_volt_min, opp->u_volt_max);
- return false;
+ struct regulator *reg;
+ int i;
+
+ for (i = 0; i < opp_table->regulator_count; i++) {
+ reg = opp_table->regulators[i];
+
+ if (!regulator_is_supported_voltage(reg,
+ opp->supplies[i].u_volt_min,
+ opp->supplies[i].u_volt_max)) {
+ pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
+ __func__, opp->supplies[i].u_volt_min,
+ opp->supplies[i].u_volt_max);
+ return false;
+ }
}
return true;
/* Duplicate OPPs */
dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
- __func__, opp->rate, opp->u_volt, opp->available,
- new_opp->rate, new_opp->u_volt, new_opp->available);
+ __func__, opp->rate, opp->supplies[0].u_volt,
+ opp->available, new_opp->rate,
+ new_opp->supplies[0].u_volt, new_opp->available);
- return opp->available && new_opp->u_volt == opp->u_volt ?
- 0 : -EEXIST;
+ /* Should we compare voltages for all regulators here ? */
+ return opp->available &&
+ new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? 0 : -EEXIST;
}
new_opp->opp_table = opp_table;
/* populate the opp table */
new_opp->rate = freq;
tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
- new_opp->u_volt = u_volt;
- new_opp->u_volt_min = u_volt - tol;
- new_opp->u_volt_max = u_volt + tol;
+ new_opp->supplies[0].u_volt = u_volt;
+ new_opp->supplies[0].u_volt_min = u_volt - tol;
+ new_opp->supplies[0].u_volt_max = u_volt + tol;
new_opp->available = true;
new_opp->dynamic = dynamic;
EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
/**
- * dev_pm_opp_set_regulator() - Set regulator name for the device
+ * dev_pm_opp_set_regulators() - Set regulator names for the device
* @dev: Device for which regulator name is being set.
- * @name: Name of the regulator.
+ * @names: Array of pointers to the names of the regulator.
+ * @count: Number of regulators.
*
* In order to support OPP switching, OPP layer needs to know the name of the
- * device's regulator, as the core would be required to switch voltages as well.
+ * device's regulators, as the core would be required to switch voltages as
+ * well.
*
* This must be called before any OPPs are initialized for the device.
*
* that this function is *NOT* called under RCU protection or in contexts where
* mutex cannot be locked.
*/
-int dev_pm_opp_set_regulator(struct device *dev, const char *name)
+struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
+ const char * const names[],
+ unsigned int count)
{
struct opp_table *opp_table;
struct regulator *reg;
- int ret;
+ int ret, i;
mutex_lock(&opp_table_lock);
goto err;
}
- /* Already have a regulator set */
- if (WARN_ON(!IS_ERR(opp_table->regulator))) {
+ /* Already have regulators set */
+ if (WARN_ON(opp_table->regulators)) {
ret = -EBUSY;
goto err;
}
- /* Allocate the regulator */
- reg = regulator_get_optional(dev, name);
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "%s: no regulator (%s) found: %d\n",
- __func__, name, ret);
+
+ opp_table->regulators = kmalloc_array(count,
+ sizeof(*opp_table->regulators),
+ GFP_KERNEL);
+ if (!opp_table->regulators) {
+ ret = -ENOMEM;
goto err;
}
- opp_table->regulator = reg;
+ for (i = 0; i < count; i++) {
+ reg = regulator_get_optional(dev, names[i]);
+ if (IS_ERR(reg)) {
+ ret = PTR_ERR(reg);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "%s: no regulator (%s) found: %d\n",
+ __func__, names[i], ret);
+ goto free_regulators;
+ }
+
+ opp_table->regulators[i] = reg;
+ }
+
+ opp_table->regulator_count = count;
mutex_unlock(&opp_table_lock);
- return 0;
+ return opp_table;
+
+free_regulators:
+ while (i != 0)
+ regulator_put(opp_table->regulators[--i]);
+ kfree(opp_table->regulators);
+ opp_table->regulators = NULL;
err:
_remove_opp_table(opp_table);
unlock:
mutex_unlock(&opp_table_lock);
- return ret;
+ return ERR_PTR(ret);
}
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulators);
/**
- * dev_pm_opp_put_regulator() - Releases resources blocked for regulator
- * @dev: Device for which regulator was set.
+ * dev_pm_opp_put_regulators() - Releases resources blocked for regulator
+ * @opp_table: OPP table returned from dev_pm_opp_set_regulators().
*
* Locking: The internal opp_table and opp structures are RCU protected.
* Hence this function internally uses RCU updater strategy with mutex locks
* that this function is *NOT* called under RCU protection or in contexts where
* mutex cannot be locked.
*/
-void dev_pm_opp_put_regulator(struct device *dev)
+void dev_pm_opp_put_regulators(struct opp_table *opp_table)
{
- struct opp_table *opp_table;
+ int i;
mutex_lock(&opp_table_lock);
- /* Check for existing table for 'dev' first */
- opp_table = _find_opp_table(dev);
- if (IS_ERR(opp_table)) {
- dev_err(dev, "Failed to find opp_table: %ld\n",
- PTR_ERR(opp_table));
- goto unlock;
- }
-
- if (IS_ERR(opp_table->regulator)) {
- dev_err(dev, "%s: Doesn't have regulator set\n", __func__);
+ if (!opp_table->regulators) {
+ pr_err("%s: Doesn't have regulators set\n", __func__);
goto unlock;
}
/* Make sure there are no concurrent readers while updating opp_table */
WARN_ON(!list_empty(&opp_table->opp_list));
- regulator_put(opp_table->regulator);
- opp_table->regulator = ERR_PTR(-ENXIO);
+ for (i = opp_table->regulator_count - 1; i >= 0; i--)
+ regulator_put(opp_table->regulators[i]);
+
+ kfree(opp_table->regulators);
+ opp_table->regulators = NULL;
+ opp_table->regulator_count = 0;
/* Try freeing opp_table if this was the last blocking resource */
_remove_opp_table(opp_table);
unlock:
mutex_unlock(&opp_table_lock);
}
-EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators);
/**
* dev_pm_opp_add() - Add an OPP table from a table definitions
projects / mirror_ubuntu-artful-kernel.git / blobdiff