unsigned char msg_flags;
/* Does the BMC have an event buffer? */
- char has_event_buffer;
+ bool has_event_buffer;
/*
* If set to true, this will request events the next time the
* call. Generally used after a panic to make sure stuff goes
* out.
*/
- int run_to_completion;
+ bool run_to_completion;
/* The I/O port of an SI interface. */
int port;
/* The timer for this si. */
struct timer_list si_timer;
+ /* This flag is set, if the timer is running (timer_pending() isn't enough) */
+ bool timer_running;
+
/* The time (in jiffies) the last timeout occurred at. */
unsigned long last_timeout_jiffies;
/* Used to gracefully stop the timer without race conditions. */
atomic_t stop_operation;
+ /* Are we waiting for the events, pretimeouts, received msgs? */
+ atomic_t need_watch;
+
/*
* The driver will disable interrupts when it gets into a
* situation where it cannot handle messages due to lack of
* memory. Once that situation clears up, it will re-enable
* interrupts.
*/
- int interrupt_disabled;
+ bool interrupt_disabled;
/* From the get device id response... */
struct ipmi_device_id device_id;
* True if we allocated the device, false if it came from
* someplace else (like PCI).
*/
- int dev_registered;
+ bool dev_registered;
/* Slave address, could be reported from DMI. */
unsigned char slave_addr;
static int force_kipmid[SI_MAX_PARMS];
static int num_force_kipmid;
#ifdef CONFIG_PCI
-static int pci_registered;
+static bool pci_registered;
#endif
#ifdef CONFIG_ACPI
-static int pnp_registered;
+static bool pnp_registered;
#endif
#ifdef CONFIG_PARISC
-static int parisc_registered;
+static bool parisc_registered;
#endif
static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
static int num_max_busy_us;
-static int unload_when_empty = 1;
+static bool unload_when_empty = true;
static int add_smi(struct smi_info *smi);
static int try_smi_init(struct smi_info *smi);
smi_info->si_state = SI_CLEARING_FLAGS;
}
+static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val)
+{
+ smi_info->last_timeout_jiffies = jiffies;
+ mod_timer(&smi_info->si_timer, new_val);
+ smi_info->timer_running = true;
+}
+
/*
* When we have a situtaion where we run out of memory and cannot
* allocate messages, we just leave them in the BMC and run the system
{
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
start_disable_irq(smi_info);
- smi_info->interrupt_disabled = 1;
+ smi_info->interrupt_disabled = true;
if (!atomic_read(&smi_info->stop_operation))
- mod_timer(&smi_info->si_timer,
- jiffies + SI_TIMEOUT_JIFFIES);
+ smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
}
}
{
if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
start_enable_irq(smi_info);
- smi_info->interrupt_disabled = 0;
+ smi_info->interrupt_disabled = false;
}
}
dev_warn(smi_info->dev,
"Maybe ok, but ipmi might run very slowly.\n");
} else
- smi_info->interrupt_disabled = 0;
+ smi_info->interrupt_disabled = false;
smi_info->si_state = SI_NORMAL;
break;
}
return si_sm_result;
}
+static void check_start_timer_thread(struct smi_info *smi_info)
+{
+ if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) {
+ smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
+ if (smi_info->thread)
+ wake_up_process(smi_info->thread);
+
+ start_next_msg(smi_info);
+ smi_event_handler(smi_info, 0);
+ }
+}
+
static void sender(void *send_info,
struct ipmi_smi_msg *msg,
int priority)
else
list_add_tail(&msg->link, &smi_info->xmit_msgs);
- if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) {
- /*
- * last_timeout_jiffies is updated here to avoid
- * smi_timeout() handler passing very large time_diff
- * value to smi_event_handler() that causes
- * the send command to abort.
- */
- smi_info->last_timeout_jiffies = jiffies;
-
- mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
-
- if (smi_info->thread)
- wake_up_process(smi_info->thread);
-
- start_next_msg(smi_info);
- smi_event_handler(smi_info, 0);
- }
+ check_start_timer_thread(smi_info);
spin_unlock_irqrestore(&smi_info->si_lock, flags);
}
-static void set_run_to_completion(void *send_info, int i_run_to_completion)
+static void set_run_to_completion(void *send_info, bool i_run_to_completion)
{
struct smi_info *smi_info = send_info;
enum si_sm_result result;
spin_lock_irqsave(&(smi_info->si_lock), flags);
smi_result = smi_event_handler(smi_info, 0);
+
+ /*
+ * If the driver is doing something, there is a possible
+ * race with the timer. If the timer handler see idle,
+ * and the thread here sees something else, the timer
+ * handler won't restart the timer even though it is
+ * required. So start it here if necessary.
+ */
+ if (smi_result != SI_SM_IDLE && !smi_info->timer_running)
+ smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
&busy_until);
; /* do nothing */
else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
schedule();
- else if (smi_result == SI_SM_IDLE)
- schedule_timeout_interruptible(100);
- else
+ else if (smi_result == SI_SM_IDLE) {
+ if (atomic_read(&smi_info->need_watch)) {
+ schedule_timeout_interruptible(100);
+ } else {
+ /* Wait to be woken up when we are needed. */
+ __set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ }
+ } else
schedule_timeout_interruptible(1);
}
return 0;
{
struct smi_info *smi_info = send_info;
unsigned long flags = 0;
- int run_to_completion = smi_info->run_to_completion;
+ bool run_to_completion = smi_info->run_to_completion;
/*
* Make sure there is some delay in the poll loop so we can
atomic_set(&smi_info->req_events, 1);
}
+static void set_need_watch(void *send_info, bool enable)
+{
+ struct smi_info *smi_info = send_info;
+ unsigned long flags;
+
+ atomic_set(&smi_info->need_watch, enable);
+ spin_lock_irqsave(&smi_info->si_lock, flags);
+ check_start_timer_thread(smi_info);
+ spin_unlock_irqrestore(&smi_info->si_lock, flags);
+}
+
static int initialized;
static void smi_timeout(unsigned long data)
* SI_USEC_PER_JIFFY);
smi_result = smi_event_handler(smi_info, time_diff);
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
-
- smi_info->last_timeout_jiffies = jiffies_now;
-
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
/* Running with interrupts, only do long timeouts. */
timeout = jiffies + SI_TIMEOUT_JIFFIES;
do_mod_timer:
if (smi_result != SI_SM_IDLE)
- mod_timer(&(smi_info->si_timer), timeout);
+ smi_mod_timer(smi_info, timeout);
+ else
+ smi_info->timer_running = false;
+ spin_unlock_irqrestore(&(smi_info->si_lock), flags);
}
static irqreturn_t si_irq_handler(int irq, void *data)
/* Set up the timer that drives the interface. */
setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
- new_smi->last_timeout_jiffies = jiffies;
- mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+ smi_mod_timer(new_smi, jiffies + SI_TIMEOUT_JIFFIES);
/*
* Check if the user forcefully enabled the daemon.
return 0;
}
-static void set_maintenance_mode(void *send_info, int enable)
+static void set_maintenance_mode(void *send_info, bool enable)
{
struct smi_info *smi_info = send_info;
.get_smi_info = get_smi_info,
.sender = sender,
.request_events = request_events,
+ .set_need_watch = set_need_watch,
.set_maintenance_mode = set_maintenance_mode,
.set_run_to_completion = set_run_to_completion,
.poll = poll,
#ifdef CONFIG_PCI
static bool si_trypci = 1;
#endif
-static bool si_trydefaults = 1;
+static bool si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS);
static char *si_type[SI_MAX_PARMS];
#define MAX_SI_TYPE_STR 30
static char si_type_str[MAX_SI_TYPE_STR];
MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
" disabled(0). Normally the IPMI driver auto-detects"
" this, but the value may be overridden by this parm.");
-module_param(unload_when_empty, int, 0);
+module_param(unload_when_empty, bool, 0);
MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
" specified or found, default is 1. Setting to 0"
" is useful for hot add of devices using hotmod.");
INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
new_smi->curr_msg = NULL;
atomic_set(&new_smi->req_events, 0);
- new_smi->run_to_completion = 0;
+ new_smi->run_to_completion = false;
for (i = 0; i < SI_NUM_STATS; i++)
atomic_set(&new_smi->stats[i], 0);
- new_smi->interrupt_disabled = 1;
+ new_smi->interrupt_disabled = true;
atomic_set(&new_smi->stop_operation, 0);
+ atomic_set(&new_smi->need_watch, 0);
new_smi->intf_num = smi_num;
smi_num++;
rv = try_enable_event_buffer(new_smi);
if (rv == 0)
- new_smi->has_event_buffer = 1;
+ new_smi->has_event_buffer = true;
/*
* Start clearing the flags before we enable interrupts or the
rv);
goto out_err;
}
- new_smi->dev_registered = 1;
+ new_smi->dev_registered = true;
}
rv = ipmi_register_smi(&handlers,
wait_for_timer_and_thread(new_smi);
out_err:
- new_smi->interrupt_disabled = 1;
+ new_smi->interrupt_disabled = true;
if (new_smi->intf) {
ipmi_unregister_smi(new_smi->intf);
if (new_smi->dev_registered) {
platform_device_unregister(new_smi->pdev);
- new_smi->dev_registered = 0;
+ new_smi->dev_registered = false;
}
return rv;
printk(KERN_ERR PFX "Unable to register "
"PCI driver: %d\n", rv);
else
- pci_registered = 1;
+ pci_registered = true;
}
#endif
#ifdef CONFIG_ACPI
if (si_tryacpi) {
pnp_register_driver(&ipmi_pnp_driver);
- pnp_registered = 1;
+ pnp_registered = true;
}
#endif
#ifdef CONFIG_PARISC
register_parisc_driver(&ipmi_parisc_driver);
- parisc_registered = 1;
+ parisc_registered = true;
/* poking PC IO addresses will crash machine, don't do it */
si_trydefaults = 0;
#endif
projects / mirror_ubuntu-artful-kernel.git / blobdiff