#define RING_ACTHD(base) ((base)+0x74)
#define RING_NOPID(base) ((base)+0x94)
#define RING_IMR(base) ((base)+0xa8)
+#define RING_TIMESTAMP(base) ((base)+0x358)
#define TAIL_ADDR 0x001FFFF8
#define HEAD_WRAP_COUNT 0xFFE00000
#define HEAD_WRAP_ONE 0x00200000
#define GFX_PSMI_GRANULARITY (1<<10)
#define GFX_PPGTT_ENABLE (1<<9)
+#define VLV_DISPLAY_BASE 0x180000
+
#define SCPD0 0x0209c /* 915+ only */
#define IER 0x020a0
#define IIR 0x020a4
#define GEN6_BLITTER_FBC_NOTIFY (1<<3)
#define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050
-#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK (1 << 16)
-#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE (1 << 0)
-#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0
-#define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3)
+#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0)
+#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2)
+#define GEN6_BSD_SLEEP_INDICATOR (1 << 3)
+#define GEN6_BSD_GO_INDICATOR (1 << 4)
#define GEN6_BSD_HWSTAM 0x12098
#define GEN6_BSD_IMR 0x120a8
#define DDRMPLL1 0X12c20
#define PEG_BAND_GAP_DATA 0x14d68
+#define GEN6_GT_THREAD_STATUS_REG 0x13805c
+#define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7
+#define GEN6_GT_THREAD_STATUS_CORE_MASK_HSW (0x7 | (0x07 << 16))
+
#define GEN6_GT_PERF_STATUS 0x145948
#define GEN6_RP_STATE_LIMITS 0x145994
#define GEN6_RP_STATE_CAP 0x145998
GEN6_CXT_RENDER_SIZE(cxt_reg) + \
GEN6_CXT_EXTENDED_SIZE(cxt_reg) + \
GEN6_CXT_PIPELINE_SIZE(cxt_reg))
-#define GEN7_CTX_SIZE 0x21a8
-#define GEN7_CTX_RENDER_SIZE(ctx_reg) ((ctx_reg >> 16) & 0x3f)
-#define GEN7_CTX_EXTENDED_SIZE(ctx_reg) ((ctx_reg >> 9) & 0x7f)
-#define GEN7_CTX_GT1_SIZE(ctx_reg) ((ctx_reg >> 6) & 0x7)
-#define GEN7_CTX_VFSTATE_SIZE(ctx_reg) ((ctx_reg >> 0) & 0x3f)
-#define GEN7_CTX_TOTAL_SIZE(ctx_reg) (GEN7_CTX_RENDER_SIZE(ctx_reg) + \
- GEN7_CTX_EXTENDED_SIZE(ctx_reg) + \
- GEN7_CTX_GT1_SIZE(ctx_reg) + \
- GEN7_CTX_VFSTATE_SIZE(ctx_reg))
+#define GEN7_CXT_SIZE 0x21a8
+#define GEN7_CXT_POWER_SIZE(ctx_reg) ((ctx_reg >> 25) & 0x7f)
+#define GEN7_CXT_RING_SIZE(ctx_reg) ((ctx_reg >> 22) & 0x7)
+#define GEN7_CXT_RENDER_SIZE(ctx_reg) ((ctx_reg >> 16) & 0x3f)
+#define GEN7_CXT_EXTENDED_SIZE(ctx_reg) ((ctx_reg >> 9) & 0x7f)
+#define GEN7_CXT_GT1_SIZE(ctx_reg) ((ctx_reg >> 6) & 0x7)
+#define GEN7_CXT_VFSTATE_SIZE(ctx_reg) ((ctx_reg >> 0) & 0x3f)
+#define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_POWER_SIZE(ctx_reg) + \
+ GEN7_CXT_RING_SIZE(ctx_reg) + \
+ GEN7_CXT_RENDER_SIZE(ctx_reg) + \
+ GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \
+ GEN7_CXT_GT1_SIZE(ctx_reg) + \
+ GEN7_CXT_VFSTATE_SIZE(ctx_reg))
+#define HSW_CXT_POWER_SIZE(ctx_reg) ((ctx_reg >> 26) & 0x3f)
+#define HSW_CXT_RING_SIZE(ctx_reg) ((ctx_reg >> 23) & 0x7)
+#define HSW_CXT_RENDER_SIZE(ctx_reg) ((ctx_reg >> 15) & 0xff)
+#define HSW_CXT_TOTAL_SIZE(ctx_reg) (HSW_CXT_POWER_SIZE(ctx_reg) + \
+ HSW_CXT_RING_SIZE(ctx_reg) + \
+ HSW_CXT_RENDER_SIZE(ctx_reg) + \
+ GEN7_CXT_VFSTATE_SIZE(ctx_reg))
+
/*
* Overlay regs
/* VGA port control */
#define ADPA 0x61100
+#define PCH_ADPA 0xe1100
+#define VLV_ADPA (VLV_DISPLAY_BASE + ADPA)
+
#define ADPA_DAC_ENABLE (1<<31)
#define ADPA_DAC_DISABLE 0
#define ADPA_PIPE_SELECT_MASK (1<<30)
#define ADPA_PIPE_A_SELECT 0
#define ADPA_PIPE_B_SELECT (1<<30)
#define ADPA_PIPE_SELECT(pipe) ((pipe) << 30)
+/* CPT uses bits 29:30 for pch transcoder select */
+#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */
+#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24)
+#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24)
+#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
+#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24)
+#define ADPA_CRT_HOTPLUG_ENABLE (1<<23)
+#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22)
+#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22)
+#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21)
+#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21)
+#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20)
+#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20)
+#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18)
+#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18)
+#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18)
+#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18)
+#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17)
+#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17)
+#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
#define ADPA_USE_VGA_HVPOLARITY (1<<15)
#define ADPA_SETS_HVPOLARITY 0
#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
/* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is
* like the normal CTL from gen4 and earlier. Hooray for confusing naming. */
#define BLC_PWM_PCH_CTL1 0xc8250
-#define BLM_PCH_PWM_ENABLE (1 << 30)
+#define BLM_PCH_PWM_ENABLE (1 << 31)
#define BLM_PCH_OVERRIDE_ENABLE (1 << 30)
#define BLM_PCH_POLARITY (1 << 29)
#define BLC_PWM_PCH_CTL2 0xc8254
#define DSPSIZE(plane) _PIPE(plane, _DSPASIZE, _DSPBSIZE)
#define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF)
#define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF)
+#define DSPLINOFF(plane) DSPADDR(plane)
/* Display/Sprite base address macros */
#define DISP_BASEADDR_MASK (0xfffff000)
#define I915_LO_DISPBASE(val) (val & ~DISP_BASEADDR_MASK)
#define I915_HI_DISPBASE(val) (val & DISP_BASEADDR_MASK)
#define I915_MODIFY_DISPBASE(reg, gfx_addr) \
- (I915_WRITE(reg, gfx_addr | I915_LO_DISPBASE(I915_READ(reg))))
+ (I915_WRITE((reg), (gfx_addr) | I915_LO_DISPBASE(I915_READ(reg))))
/* VBIOS flags */
#define SWF00 0x71410
#define _FDI_RXA_TUSIZE2 0xf0038
#define _FDI_RXB_TUSIZE1 0xf1030
#define _FDI_RXB_TUSIZE2 0xf1038
+#define FDI_RX_TP1_TO_TP2_48 (2<<20)
+#define FDI_RX_TP1_TO_TP2_64 (3<<20)
+#define FDI_RX_FDI_DELAY_90 (0x90<<0)
#define FDI_RX_MISC(pipe) _PIPE(pipe, _FDI_RXA_MISC, _FDI_RXB_MISC)
#define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE1, _FDI_RXB_TUSIZE1)
#define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE2, _FDI_RXB_TUSIZE2)
#define FDI_PLL_CTL_1 0xfe000
#define FDI_PLL_CTL_2 0xfe004
-/* CRT */
-#define PCH_ADPA 0xe1100
-#define ADPA_TRANS_SELECT_MASK (1<<30)
-#define ADPA_TRANS_A_SELECT 0
-#define ADPA_TRANS_B_SELECT (1<<30)
-#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */
-#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24)
-#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24)
-#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
-#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24)
-#define ADPA_CRT_HOTPLUG_ENABLE (1<<23)
-#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22)
-#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22)
-#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21)
-#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21)
-#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20)
-#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20)
-#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18)
-#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18)
-#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18)
-#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18)
-#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17)
-#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17)
-#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
-
/* or SDVOB */
#define HDMIB 0xe1140
#define PORT_ENABLE (1 << 31)
#define FORCEWAKE 0xA18C
#define FORCEWAKE_VLV 0x1300b0
#define FORCEWAKE_ACK_VLV 0x1300b4
+#define FORCEWAKE_ACK_HSW 0x130044
#define FORCEWAKE_ACK 0x130090
#define FORCEWAKE_MT 0xa188 /* multi-threaded */
#define FORCEWAKE_MT_ACK 0x130040
#define GEN6_RP_UP_IDLE_MIN (0x1<<3)
#define GEN6_RP_UP_BUSY_AVG (0x2<<3)
#define GEN6_RP_UP_BUSY_CONT (0x4<<3)
+#define GEN7_RP_DOWN_IDLE_AVG (0x2<<0)
#define GEN6_RP_DOWN_IDLE_CONT (0x1<<0)
#define GEN6_RP_UP_THRESHOLD 0xA02C
#define GEN6_RP_DOWN_THRESHOLD 0xA030
#define AUD_CONFIG_DISABLE_NCTS (1 << 3)
/* HSW Power Wells */
-#define HSW_PWR_WELL_CTL1 0x45400 /* BIOS */
-#define HSW_PWR_WELL_CTL2 0x45404 /* Driver */
-#define HSW_PWR_WELL_CTL3 0x45408 /* KVMR */
-#define HSW_PWR_WELL_CTL4 0x4540C /* Debug */
-#define HSW_PWR_WELL_ENABLE (1<<31)
-#define HSW_PWR_WELL_STATE (1<<30)
-#define HSW_PWR_WELL_CTL5 0x45410
+#define HSW_PWR_WELL_CTL1 0x45400 /* BIOS */
+#define HSW_PWR_WELL_CTL2 0x45404 /* Driver */
+#define HSW_PWR_WELL_CTL3 0x45408 /* KVMR */
+#define HSW_PWR_WELL_CTL4 0x4540C /* Debug */
+#define HSW_PWR_WELL_ENABLE (1<<31)
+#define HSW_PWR_WELL_STATE (1<<30)
+#define HSW_PWR_WELL_CTL5 0x45410
#define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31)
#define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20)
-#define HSW_PWR_WELL_FORCE_ON (1<<19)
-#define HSW_PWR_WELL_CTL6 0x45414
+#define HSW_PWR_WELL_FORCE_ON (1<<19)
+#define HSW_PWR_WELL_CTL6 0x45414
/* Per-pipe DDI Function Control */
-#define PIPE_DDI_FUNC_CTL_A 0x60400
-#define PIPE_DDI_FUNC_CTL_B 0x61400
-#define PIPE_DDI_FUNC_CTL_C 0x62400
+#define PIPE_DDI_FUNC_CTL_A 0x60400
+#define PIPE_DDI_FUNC_CTL_B 0x61400
+#define PIPE_DDI_FUNC_CTL_C 0x62400
#define PIPE_DDI_FUNC_CTL_EDP 0x6F400
-#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \
- PIPE_DDI_FUNC_CTL_A, \
- PIPE_DDI_FUNC_CTL_B)
+#define DDI_FUNC_CTL(pipe) _PIPE(pipe, PIPE_DDI_FUNC_CTL_A, \
+ PIPE_DDI_FUNC_CTL_B)
#define PIPE_DDI_FUNC_ENABLE (1<<31)
/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
-#define PIPE_DDI_PORT_MASK (0xf<<28)
-#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
-#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
-#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
+#define PIPE_DDI_PORT_MASK (7<<28)
+#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
+#define PIPE_DDI_MODE_SELECT_MASK (7<<24)
+#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
+#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
#define PIPE_DDI_MODE_SELECT_DP_SST (2<<24)
#define PIPE_DDI_MODE_SELECT_DP_MST (3<<24)
-#define PIPE_DDI_MODE_SELECT_FDI (4<<24)
-#define PIPE_DDI_BPC_8 (0<<20)
-#define PIPE_DDI_BPC_10 (1<<20)
-#define PIPE_DDI_BPC_6 (2<<20)
-#define PIPE_DDI_BPC_12 (3<<20)
-#define PIPE_DDI_BFI_ENABLE (1<<4)
-#define PIPE_DDI_PORT_WIDTH_X1 (0<<1)
-#define PIPE_DDI_PORT_WIDTH_X2 (1<<1)
-#define PIPE_DDI_PORT_WIDTH_X4 (3<<1)
+#define PIPE_DDI_MODE_SELECT_FDI (4<<24)
+#define PIPE_DDI_BPC_MASK (7<<20)
+#define PIPE_DDI_BPC_8 (0<<20)
+#define PIPE_DDI_BPC_10 (1<<20)
+#define PIPE_DDI_BPC_6 (2<<20)
+#define PIPE_DDI_BPC_12 (3<<20)
+#define PIPE_DDI_PVSYNC (1<<17)
+#define PIPE_DDI_PHSYNC (1<<16)
+#define PIPE_DDI_BFI_ENABLE (1<<4)
+#define PIPE_DDI_PORT_WIDTH_X1 (0<<1)
+#define PIPE_DDI_PORT_WIDTH_X2 (1<<1)
+#define PIPE_DDI_PORT_WIDTH_X4 (3<<1)
/* DisplayPort Transport Control */
#define DP_TP_CTL_A 0x64040
#define DP_TP_CTL_B 0x64140
-#define DP_TP_CTL(port) _PORT(port, \
- DP_TP_CTL_A, \
- DP_TP_CTL_B)
-#define DP_TP_CTL_ENABLE (1<<31)
-#define DP_TP_CTL_MODE_SST (0<<27)
-#define DP_TP_CTL_MODE_MST (1<<27)
+#define DP_TP_CTL(port) _PORT(port, DP_TP_CTL_A, DP_TP_CTL_B)
+#define DP_TP_CTL_ENABLE (1<<31)
+#define DP_TP_CTL_MODE_SST (0<<27)
+#define DP_TP_CTL_MODE_MST (1<<27)
#define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18)
-#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15)
+#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15)
#define DP_TP_CTL_LINK_TRAIN_MASK (7<<8)
#define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8)
#define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8)
-#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8)
+#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8)
/* DisplayPort Transport Status */
#define DP_TP_STATUS_A 0x64044
#define DP_TP_STATUS_B 0x64144
-#define DP_TP_STATUS(port) _PORT(port, \
- DP_TP_STATUS_A, \
- DP_TP_STATUS_B)
+#define DP_TP_STATUS(port) _PORT(port, DP_TP_STATUS_A, DP_TP_STATUS_B)
#define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12)
/* DDI Buffer Control */
#define DDI_BUF_CTL_A 0x64000
#define DDI_BUF_CTL_B 0x64100
-#define DDI_BUF_CTL(port) _PORT(port, \
- DDI_BUF_CTL_A, \
- DDI_BUF_CTL_B)
-#define DDI_BUF_CTL_ENABLE (1<<31)
+#define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B)
+#define DDI_BUF_CTL_ENABLE (1<<31)
#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */
-#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
+#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */
-#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
+#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */
-#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
+#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */
#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */
-#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
-#define DDI_BUF_EMP_MASK (0xf<<24)
-#define DDI_BUF_IS_IDLE (1<<7)
-#define DDI_PORT_WIDTH_X1 (0<<1)
-#define DDI_PORT_WIDTH_X2 (1<<1)
-#define DDI_PORT_WIDTH_X4 (3<<1)
+#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
+#define DDI_BUF_EMP_MASK (0xf<<24)
+#define DDI_BUF_IS_IDLE (1<<7)
+#define DDI_PORT_WIDTH_X1 (0<<1)
+#define DDI_PORT_WIDTH_X2 (1<<1)
+#define DDI_PORT_WIDTH_X4 (3<<1)
#define DDI_INIT_DISPLAY_DETECTED (1<<0)
/* DDI Buffer Translations */
#define DDI_BUF_TRANS_A 0x64E00
#define DDI_BUF_TRANS_B 0x64E60
-#define DDI_BUF_TRANS(port) _PORT(port, \
- DDI_BUF_TRANS_A, \
- DDI_BUF_TRANS_B)
+#define DDI_BUF_TRANS(port) _PORT(port, DDI_BUF_TRANS_A, DDI_BUF_TRANS_B)
/* Sideband Interface (SBI) is programmed indirectly, via
* SBI_ADDR, which contains the register offset; and SBI_DATA,
* which contains the payload */
-#define SBI_ADDR 0xC6000
-#define SBI_DATA 0xC6004
+#define SBI_ADDR 0xC6000
+#define SBI_DATA 0xC6004
#define SBI_CTL_STAT 0xC6008
#define SBI_CTL_OP_CRRD (0x6<<8)
#define SBI_CTL_OP_CRWR (0x7<<8)
#define SBI_RESPONSE_FAIL (0x1<<1)
-#define SBI_RESPONSE_SUCCESS (0x0<<1)
-#define SBI_BUSY (0x1<<0)
-#define SBI_READY (0x0<<0)
+#define SBI_RESPONSE_SUCCESS (0x0<<1)
+#define SBI_BUSY (0x1<<0)
+#define SBI_READY (0x0<<0)
/* SBI offsets */
-#define SBI_SSCDIVINTPHASE6 0x0600
+#define SBI_SSCDIVINTPHASE6 0x0600
#define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1)
#define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1)
#define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8)
#define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8)
-#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15)
+#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15)
#define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0)
-#define SBI_SSCCTL 0x020c
+#define SBI_SSCCTL 0x020c
#define SBI_SSCCTL6 0x060C
-#define SBI_SSCCTL_DISABLE (1<<0)
+#define SBI_SSCCTL_DISABLE (1<<0)
#define SBI_SSCAUXDIV6 0x0610
#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4)
-#define SBI_DBUFF0 0x2a00
+#define SBI_DBUFF0 0x2a00
/* LPT PIXCLK_GATE */
-#define PIXCLK_GATE 0xC6020
+#define PIXCLK_GATE 0xC6020
#define PIXCLK_GATE_UNGATE 1<<0
#define PIXCLK_GATE_GATE 0<<0
/* SPLL */
-#define SPLL_CTL 0x46020
+#define SPLL_CTL 0x46020
#define SPLL_PLL_ENABLE (1<<31)
#define SPLL_PLL_SCC (1<<28)
#define SPLL_PLL_NON_SCC (2<<28)
-#define SPLL_PLL_FREQ_810MHz (0<<26)
-#define SPLL_PLL_FREQ_1350MHz (1<<26)
+#define SPLL_PLL_FREQ_810MHz (0<<26)
+#define SPLL_PLL_FREQ_1350MHz (1<<26)
/* WRPLL */
-#define WRPLL_CTL1 0x46040
-#define WRPLL_CTL2 0x46060
-#define WRPLL_PLL_ENABLE (1<<31)
-#define WRPLL_PLL_SELECT_SSC (0x01<<28)
-#define WRPLL_PLL_SELECT_NON_SCC (0x02<<28)
+#define WRPLL_CTL1 0x46040
+#define WRPLL_CTL2 0x46060
+#define WRPLL_PLL_ENABLE (1<<31)
+#define WRPLL_PLL_SELECT_SSC (0x01<<28)
+#define WRPLL_PLL_SELECT_NON_SCC (0x02<<28)
#define WRPLL_PLL_SELECT_LCPLL_2700 (0x03<<28)
/* WRPLL divider programming */
-#define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0)
-#define WRPLL_DIVIDER_POST(x) ((x)<<8)
-#define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16)
+#define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0)
+#define WRPLL_DIVIDER_POST(x) ((x)<<8)
+#define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16)
/* Port clock selection */
#define PORT_CLK_SEL_A 0x46100
#define PORT_CLK_SEL_B 0x46104
-#define PORT_CLK_SEL(port) _PORT(port, \
- PORT_CLK_SEL_A, \
- PORT_CLK_SEL_B)
+#define PORT_CLK_SEL(port) _PORT(port, PORT_CLK_SEL_A, PORT_CLK_SEL_B)
#define PORT_CLK_SEL_LCPLL_2700 (0<<29)
#define PORT_CLK_SEL_LCPLL_1350 (1<<29)
#define PORT_CLK_SEL_LCPLL_810 (2<<29)
-#define PORT_CLK_SEL_SPLL (3<<29)
+#define PORT_CLK_SEL_SPLL (3<<29)
#define PORT_CLK_SEL_WRPLL1 (4<<29)
#define PORT_CLK_SEL_WRPLL2 (5<<29)
/* Pipe clock selection */
#define PIPE_CLK_SEL_A 0x46140
#define PIPE_CLK_SEL_B 0x46144
-#define PIPE_CLK_SEL(pipe) _PIPE(pipe, \
- PIPE_CLK_SEL_A, \
- PIPE_CLK_SEL_B)
+#define PIPE_CLK_SEL(pipe) _PIPE(pipe, PIPE_CLK_SEL_A, PIPE_CLK_SEL_B)
/* For each pipe, we need to select the corresponding port clock */
-#define PIPE_CLK_SEL_DISABLED (0x0<<29)
-#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29)
+#define PIPE_CLK_SEL_DISABLED (0x0<<29)
+#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29)
/* LCPLL Control */
-#define LCPLL_CTL 0x130040
+#define LCPLL_CTL 0x130040
#define LCPLL_PLL_DISABLE (1<<31)
#define LCPLL_PLL_LOCK (1<<30)
-#define LCPLL_CD_CLOCK_DISABLE (1<<25)
+#define LCPLL_CD_CLOCK_DISABLE (1<<25)
#define LCPLL_CD2X_CLOCK_DISABLE (1<<23)
/* Pipe WM_LINETIME - watermark line time */
#define PIPE_WM_LINETIME_A 0x45270
#define PIPE_WM_LINETIME_B 0x45274
-#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \
- PIPE_WM_LINETIME_A, \
- PIPE_WM_LINETIME_A)
-#define PIPE_WM_LINETIME_MASK (0x1ff)
-#define PIPE_WM_LINETIME_TIME(x) ((x))
+#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, PIPE_WM_LINETIME_A, \
+ PIPE_WM_LINETIME_B)
+#define PIPE_WM_LINETIME_MASK (0x1ff)
+#define PIPE_WM_LINETIME_TIME(x) ((x))
#define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16)
-#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16)
+#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16)
/* SFUSE_STRAP */
-#define SFUSE_STRAP 0xc2014
+#define SFUSE_STRAP 0xc2014
#define SFUSE_STRAP_DDIB_DETECTED (1<<2)
#define SFUSE_STRAP_DDIC_DETECTED (1<<1)
#define SFUSE_STRAP_DDID_DETECTED (1<<0)
+#define WM_DBG 0x45280
+#define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0)
+#define WM_DBG_DISALLOW_MAXFIFO (1<<1)
+#define WM_DBG_DISALLOW_SPRITE (1<<2)
+
#endif /* _I915_REG_H_ */
projects / mirror_ubuntu-bionic-kernel.git / blobdiff