* Eric Anholt <eric@anholt.net>
*
*/
-#include <linux/dmi.h>
+
#include <drm/drm_dp_helper.h>
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "intel_bios.h"
+/**
+ * DOC: Video BIOS Table (VBT)
+ *
+ * The Video BIOS Table, or VBT, provides platform and board specific
+ * configuration information to the driver that is not discoverable or available
+ * through other means. The configuration is mostly related to display
+ * hardware. The VBT is available via the ACPI OpRegion or, on older systems, in
+ * the PCI ROM.
+ *
+ * The VBT consists of a VBT Header (defined as &struct vbt_header), a BDB
+ * Header (&struct bdb_header), and a number of BIOS Data Blocks (BDB) that
+ * contain the actual configuration information. The VBT Header, and thus the
+ * VBT, begins with "$VBT" signature. The VBT Header contains the offset of the
+ * BDB Header. The data blocks are concatenated after the BDB Header. The data
+ * blocks have a 1-byte Block ID, 2-byte Block Size, and Block Size bytes of
+ * data. (Block 53, the MIPI Sequence Block is an exception.)
+ *
+ * The driver parses the VBT during load. The relevant information is stored in
+ * driver private data for ease of use, and the actual VBT is not read after
+ * that.
+ */
+
#define SLAVE_ADDR1 0x70
#define SLAVE_ADDR2 0x72
static int panel_type;
+/* Get BDB block size given a pointer to Block ID. */
+static u32 _get_blocksize(const u8 *block_base)
+{
+ /* The MIPI Sequence Block v3+ has a separate size field. */
+ if (*block_base == BDB_MIPI_SEQUENCE && *(block_base + 3) >= 3)
+ return *((const u32 *)(block_base + 4));
+ else
+ return *((const u16 *)(block_base + 1));
+}
+
+/* Get BDB block size give a pointer to data after Block ID and Block Size. */
+static u32 get_blocksize(const void *block_data)
+{
+ return _get_blocksize(block_data - 3);
+}
+
static const void *
find_section(const void *_bdb, int section_id)
{
/* walk the sections looking for section_id */
while (index + 3 < total) {
current_id = *(base + index);
- index++;
-
- current_size = *((const u16 *)(base + index));
- index += 2;
-
- /* The MIPI Sequence Block v3+ has a separate size field. */
- if (current_id == BDB_MIPI_SEQUENCE && *(base + index) >= 3)
- current_size = *((const u32 *)(base + index + 1));
+ current_size = _get_blocksize(base + index);
+ index += 3;
if (index + current_size > total)
return NULL;
return NULL;
}
-static u16
-get_blocksize(const void *p)
-{
- u16 *block_ptr, block_size;
-
- block_ptr = (u16 *)((char *)p - 2);
- block_size = *block_ptr;
- return block_size;
-}
-
static void
fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
const struct lvds_dvo_timing *dvo_timing)
drm_mode_debug_printmodeline(panel_fixed_mode);
}
-static int intel_bios_ssc_frequency(struct drm_device *dev,
+static int intel_bios_ssc_frequency(struct drm_i915_private *dev_priv,
bool alternate)
{
- switch (INTEL_INFO(dev)->gen) {
+ switch (INTEL_INFO(dev_priv)->gen) {
case 2:
return alternate ? 66667 : 48000;
case 3:
parse_general_features(struct drm_i915_private *dev_priv,
const struct bdb_header *bdb)
{
- struct drm_device *dev = dev_priv->dev;
const struct bdb_general_features *general;
general = find_section(bdb, BDB_GENERAL_FEATURES);
- if (general) {
- dev_priv->vbt.int_tv_support = general->int_tv_support;
- /* int_crt_support can't be trusted on earlier platforms */
- if (bdb->version >= 155 &&
- (HAS_DDI(dev_priv) || IS_VALLEYVIEW(dev_priv)))
- dev_priv->vbt.int_crt_support = general->int_crt_support;
- dev_priv->vbt.lvds_use_ssc = general->enable_ssc;
- dev_priv->vbt.lvds_ssc_freq =
- intel_bios_ssc_frequency(dev, general->ssc_freq);
- dev_priv->vbt.display_clock_mode = general->display_clock_mode;
- dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
- DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
- dev_priv->vbt.int_tv_support,
- dev_priv->vbt.int_crt_support,
- dev_priv->vbt.lvds_use_ssc,
- dev_priv->vbt.lvds_ssc_freq,
- dev_priv->vbt.display_clock_mode,
- dev_priv->vbt.fdi_rx_polarity_inverted);
- }
+ if (!general)
+ return;
+
+ dev_priv->vbt.int_tv_support = general->int_tv_support;
+ /* int_crt_support can't be trusted on earlier platforms */
+ if (bdb->version >= 155 &&
+ (HAS_DDI(dev_priv) || IS_VALLEYVIEW(dev_priv)))
+ dev_priv->vbt.int_crt_support = general->int_crt_support;
+ dev_priv->vbt.lvds_use_ssc = general->enable_ssc;
+ dev_priv->vbt.lvds_ssc_freq =
+ intel_bios_ssc_frequency(dev_priv, general->ssc_freq);
+ dev_priv->vbt.display_clock_mode = general->display_clock_mode;
+ dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
+ DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
+ dev_priv->vbt.int_tv_support,
+ dev_priv->vbt.int_crt_support,
+ dev_priv->vbt.lvds_use_ssc,
+ dev_priv->vbt.lvds_ssc_freq,
+ dev_priv->vbt.display_clock_mode,
+ dev_priv->vbt.fdi_rx_polarity_inverted);
}
static void
dev_priv->vbt.psr.tp2_tp3_wakeup_time = psr_table->tp2_tp3_wakeup_time;
}
-static u8 *goto_next_sequence(u8 *data, int *size)
-{
- u16 len;
- int tmp = *size;
-
- if (--tmp < 0)
- return NULL;
-
- /* goto first element */
- data++;
- while (1) {
- switch (*data) {
- case MIPI_SEQ_ELEM_SEND_PKT:
- /*
- * skip by this element payload size
- * skip elem id, command flag and data type
- */
- tmp -= 5;
- if (tmp < 0)
- return NULL;
-
- data += 3;
- len = *((u16 *)data);
-
- tmp -= len;
- if (tmp < 0)
- return NULL;
-
- /* skip by len */
- data = data + 2 + len;
- break;
- case MIPI_SEQ_ELEM_DELAY:
- /* skip by elem id, and delay is 4 bytes */
- tmp -= 5;
- if (tmp < 0)
- return NULL;
-
- data += 5;
- break;
- case MIPI_SEQ_ELEM_GPIO:
- tmp -= 3;
- if (tmp < 0)
- return NULL;
-
- data += 3;
- break;
- default:
- DRM_ERROR("Unknown element\n");
- return NULL;
- }
-
- /* end of sequence ? */
- if (*data == 0)
- break;
- }
-
- /* goto next sequence or end of block byte */
- if (--tmp < 0)
- return NULL;
-
- data++;
-
- /* update amount of data left for the sequence block to be parsed */
- *size = tmp;
- return data;
-}
-
static void
-parse_mipi(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
+parse_mipi_config(struct drm_i915_private *dev_priv,
+ const struct bdb_header *bdb)
{
const struct bdb_mipi_config *start;
- const struct bdb_mipi_sequence *sequence;
const struct mipi_config *config;
const struct mipi_pps_data *pps;
- u8 *data;
- const u8 *seq_data;
- int i, panel_id, seq_size;
- u16 block_size;
/* parse MIPI blocks only if LFP type is MIPI */
if (!dev_priv->vbt.has_mipi)
/* We have mandatory mipi config blocks. Initialize as generic panel */
dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
+}
- /* Check if we have sequence block as well */
- sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
- if (!sequence) {
- DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n");
- return;
+/* Find the sequence block and size for the given panel. */
+static const u8 *
+find_panel_sequence_block(const struct bdb_mipi_sequence *sequence,
+ u16 panel_id, u32 *seq_size)
+{
+ u32 total = get_blocksize(sequence);
+ const u8 *data = &sequence->data[0];
+ u8 current_id;
+ u32 current_size;
+ int header_size = sequence->version >= 3 ? 5 : 3;
+ int index = 0;
+ int i;
+
+ /* skip new block size */
+ if (sequence->version >= 3)
+ data += 4;
+
+ for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) {
+ if (index + header_size > total) {
+ DRM_ERROR("Invalid sequence block (header)\n");
+ return NULL;
+ }
+
+ current_id = *(data + index);
+ if (sequence->version >= 3)
+ current_size = *((const u32 *)(data + index + 1));
+ else
+ current_size = *((const u16 *)(data + index + 1));
+
+ index += header_size;
+
+ if (index + current_size > total) {
+ DRM_ERROR("Invalid sequence block\n");
+ return NULL;
+ }
+
+ if (current_id == panel_id) {
+ *seq_size = current_size;
+ return data + index;
+ }
+
+ index += current_size;
}
- /* Fail gracefully for forward incompatible sequence block. */
- if (sequence->version >= 3) {
- DRM_ERROR("Unable to parse MIPI Sequence Block v3+\n");
- return;
+ DRM_ERROR("Sequence block detected but no valid configuration\n");
+
+ return NULL;
+}
+
+static int goto_next_sequence(const u8 *data, int index, int total)
+{
+ u16 len;
+
+ /* Skip Sequence Byte. */
+ for (index = index + 1; index < total; index += len) {
+ u8 operation_byte = *(data + index);
+ index++;
+
+ switch (operation_byte) {
+ case MIPI_SEQ_ELEM_END:
+ return index;
+ case MIPI_SEQ_ELEM_SEND_PKT:
+ if (index + 4 > total)
+ return 0;
+
+ len = *((const u16 *)(data + index + 2)) + 4;
+ break;
+ case MIPI_SEQ_ELEM_DELAY:
+ len = 4;
+ break;
+ case MIPI_SEQ_ELEM_GPIO:
+ len = 2;
+ break;
+ case MIPI_SEQ_ELEM_I2C:
+ if (index + 7 > total)
+ return 0;
+ len = *(data + index + 6) + 7;
+ break;
+ default:
+ DRM_ERROR("Unknown operation byte\n");
+ return 0;
+ }
}
- DRM_DEBUG_DRIVER("Found MIPI sequence block\n");
+ return 0;
+}
- block_size = get_blocksize(sequence);
+static int goto_next_sequence_v3(const u8 *data, int index, int total)
+{
+ int seq_end;
+ u16 len;
/*
- * parse the sequence block for individual sequences
+ * Could skip sequence based on Size of Sequence alone, but also do some
+ * checking on the structure.
*/
- dev_priv->vbt.dsi.seq_version = sequence->version;
+ if (total < 5) {
+ DRM_ERROR("Too small sequence size\n");
+ return 0;
+ }
- seq_data = &sequence->data[0];
+ seq_end = index + *((const u32 *)(data + 1));
+ if (seq_end > total) {
+ DRM_ERROR("Invalid sequence size\n");
+ return 0;
+ }
- /*
- * sequence block is variable length and hence we need to parse and
- * get the sequence data for specific panel id
- */
- for (i = 0; i < MAX_MIPI_CONFIGURATIONS; i++) {
- panel_id = *seq_data;
- seq_size = *((u16 *) (seq_data + 1));
- if (panel_id == panel_type)
- break;
+ /* Skip Sequence Byte and Size of Sequence. */
+ for (index = index + 5; index < total; index += len) {
+ u8 operation_byte = *(data + index);
+ index++;
- /* skip the sequence including seq header of 3 bytes */
- seq_data = seq_data + 3 + seq_size;
- if ((seq_data - &sequence->data[0]) > block_size) {
- DRM_ERROR("Sequence start is beyond sequence block size, corrupted sequence block\n");
- return;
+ if (operation_byte == MIPI_SEQ_ELEM_END) {
+ if (index != seq_end) {
+ DRM_ERROR("Invalid element structure\n");
+ return 0;
+ }
+ return index;
+ }
+
+ len = *(data + index);
+ index++;
+
+ /*
+ * FIXME: Would be nice to check elements like for v1/v2 in
+ * goto_next_sequence() above.
+ */
+ switch (operation_byte) {
+ case MIPI_SEQ_ELEM_SEND_PKT:
+ case MIPI_SEQ_ELEM_DELAY:
+ case MIPI_SEQ_ELEM_GPIO:
+ case MIPI_SEQ_ELEM_I2C:
+ case MIPI_SEQ_ELEM_SPI:
+ case MIPI_SEQ_ELEM_PMIC:
+ break;
+ default:
+ DRM_ERROR("Unknown operation byte %u\n",
+ operation_byte);
+ break;
}
}
- if (i == MAX_MIPI_CONFIGURATIONS) {
- DRM_ERROR("Sequence block detected but no valid configuration\n");
+ return 0;
+}
+
+static void
+parse_mipi_sequence(struct drm_i915_private *dev_priv,
+ const struct bdb_header *bdb)
+{
+ const struct bdb_mipi_sequence *sequence;
+ const u8 *seq_data;
+ u32 seq_size;
+ u8 *data;
+ int index = 0;
+
+ /* Only our generic panel driver uses the sequence block. */
+ if (dev_priv->vbt.dsi.panel_id != MIPI_DSI_GENERIC_PANEL_ID)
+ return;
+
+ sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
+ if (!sequence) {
+ DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n");
return;
}
- /* check if found sequence is completely within the sequence block
- * just being paranoid */
- if (seq_size > block_size) {
- DRM_ERROR("Corrupted sequence/size, bailing out\n");
+ /* Fail gracefully for forward incompatible sequence block. */
+ if (sequence->version >= 4) {
+ DRM_ERROR("Unable to parse MIPI Sequence Block v%u\n",
+ sequence->version);
return;
}
- /* skip the panel id(1 byte) and seq size(2 bytes) */
- dev_priv->vbt.dsi.data = kmemdup(seq_data + 3, seq_size, GFP_KERNEL);
- if (!dev_priv->vbt.dsi.data)
+ DRM_DEBUG_DRIVER("Found MIPI sequence block v%u\n", sequence->version);
+
+ seq_data = find_panel_sequence_block(sequence, panel_type, &seq_size);
+ if (!seq_data)
return;
- /*
- * loop into the sequence data and split into multiple sequneces
- * There are only 5 types of sequences as of now
- */
- data = dev_priv->vbt.dsi.data;
- dev_priv->vbt.dsi.size = seq_size;
+ data = kmemdup(seq_data, seq_size, GFP_KERNEL);
+ if (!data)
+ return;
- /* two consecutive 0x00 indicate end of all sequences */
- while (1) {
- int seq_id = *data;
- if (MIPI_SEQ_MAX > seq_id && seq_id > MIPI_SEQ_UNDEFINED) {
- dev_priv->vbt.dsi.sequence[seq_id] = data;
- DRM_DEBUG_DRIVER("Found mipi sequence - %d\n", seq_id);
- } else {
- DRM_ERROR("undefined sequence\n");
+ /* Parse the sequences, store pointers to each sequence. */
+ for (;;) {
+ u8 seq_id = *(data + index);
+ if (seq_id == MIPI_SEQ_END)
+ break;
+
+ if (seq_id >= MIPI_SEQ_MAX) {
+ DRM_ERROR("Unknown sequence %u\n", seq_id);
goto err;
}
- /* partial parsing to skip elements */
- data = goto_next_sequence(data, &seq_size);
+ dev_priv->vbt.dsi.sequence[seq_id] = data + index;
- if (data == NULL) {
- DRM_ERROR("Sequence elements going beyond block itself. Sequence block parsing failed\n");
+ if (sequence->version >= 3)
+ index = goto_next_sequence_v3(data, index, seq_size);
+ else
+ index = goto_next_sequence(data, index, seq_size);
+ if (!index) {
+ DRM_ERROR("Invalid sequence %u\n", seq_id);
goto err;
}
-
- if (*data == 0)
- break; /* end of sequence reached */
}
- DRM_DEBUG_DRIVER("MIPI related vbt parsing complete\n");
+ dev_priv->vbt.dsi.data = data;
+ dev_priv->vbt.dsi.size = seq_size;
+ dev_priv->vbt.dsi.seq_version = sequence->version;
+
+ DRM_DEBUG_DRIVER("MIPI related VBT parsing complete\n");
return;
-err:
- kfree(dev_priv->vbt.dsi.data);
- dev_priv->vbt.dsi.data = NULL;
- /* error during parsing so set all pointers to null
- * because of partial parsing */
+err:
+ kfree(data);
memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence));
}
static void parse_ddi_ports(struct drm_i915_private *dev_priv,
const struct bdb_header *bdb)
{
- struct drm_device *dev = dev_priv->dev;
enum port port;
- if (!HAS_DDI(dev))
+ if (!HAS_DDI(dev_priv))
return;
if (!dev_priv->vbt.child_dev_num)
static void
init_vbt_defaults(struct drm_i915_private *dev_priv)
{
- struct drm_device *dev = dev_priv->dev;
enum port port;
dev_priv->vbt.crt_ddc_pin = GMBUS_PIN_VGADDC;
* Core/SandyBridge/IvyBridge use alternative (120MHz) reference
* clock for LVDS.
*/
- dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev,
- !HAS_PCH_SPLIT(dev));
+ dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev_priv,
+ !HAS_PCH_SPLIT(dev_priv));
DRM_DEBUG_KMS("Set default to SSC at %d kHz\n", dev_priv->vbt.lvds_ssc_freq);
for (port = PORT_A; port < I915_MAX_PORTS; port++) {
}
}
-static int intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
+static const struct bdb_header *get_bdb_header(const struct vbt_header *vbt)
{
- DRM_DEBUG_KMS("Falling back to manually reading VBT from "
- "VBIOS ROM for %s\n",
- id->ident);
- return 1;
+ const void *_vbt = vbt;
+
+ return _vbt + vbt->bdb_offset;
}
-static const struct dmi_system_id intel_no_opregion_vbt[] = {
- {
- .callback = intel_no_opregion_vbt_callback,
- .ident = "ThinkCentre A57",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_NAME, "97027RG"),
- },
- },
- { }
-};
-
-static const struct bdb_header *validate_vbt(const void *base,
- size_t size,
- const void *_vbt,
- const char *source)
+/**
+ * intel_bios_is_valid_vbt - does the given buffer contain a valid VBT
+ * @buf: pointer to a buffer to validate
+ * @size: size of the buffer
+ *
+ * Returns true on valid VBT.
+ */
+bool intel_bios_is_valid_vbt(const void *buf, size_t size)
{
- size_t offset = _vbt - base;
- const struct vbt_header *vbt = _vbt;
+ const struct vbt_header *vbt = buf;
const struct bdb_header *bdb;
- if (offset + sizeof(struct vbt_header) > size) {
+ if (!vbt)
+ return false;
+
+ if (sizeof(struct vbt_header) > size) {
DRM_DEBUG_DRIVER("VBT header incomplete\n");
- return NULL;
+ return false;
}
if (memcmp(vbt->signature, "$VBT", 4)) {
DRM_DEBUG_DRIVER("VBT invalid signature\n");
- return NULL;
+ return false;
}
- offset += vbt->bdb_offset;
- if (offset + sizeof(struct bdb_header) > size) {
+ if (vbt->bdb_offset + sizeof(struct bdb_header) > size) {
DRM_DEBUG_DRIVER("BDB header incomplete\n");
- return NULL;
+ return false;
}
- bdb = base + offset;
- if (offset + bdb->bdb_size > size) {
+ bdb = get_bdb_header(vbt);
+ if (vbt->bdb_offset + bdb->bdb_size > size) {
DRM_DEBUG_DRIVER("BDB incomplete\n");
- return NULL;
+ return false;
}
- DRM_DEBUG_KMS("Using VBT from %s: %20s\n",
- source, vbt->signature);
- return bdb;
+ return vbt;
}
-static const struct bdb_header *find_vbt(void __iomem *bios, size_t size)
+static const struct vbt_header *find_vbt(void __iomem *bios, size_t size)
{
- const struct bdb_header *bdb = NULL;
size_t i;
/* Scour memory looking for the VBT signature. */
for (i = 0; i + 4 < size; i++) {
- if (ioread32(bios + i) == *((const u32 *) "$VBT")) {
- /*
- * This is the one place where we explicitly discard the
- * address space (__iomem) of the BIOS/VBT. From now on
- * everything is based on 'base', and treated as regular
- * memory.
- */
- void *_bios = (void __force *) bios;
+ void *vbt;
- bdb = validate_vbt(_bios, size, _bios + i, "PCI ROM");
- break;
- }
+ if (ioread32(bios + i) != *((const u32 *) "$VBT"))
+ continue;
+
+ /*
+ * This is the one place where we explicitly discard the address
+ * space (__iomem) of the BIOS/VBT.
+ */
+ vbt = (void __force *) bios + i;
+ if (intel_bios_is_valid_vbt(vbt, size - i))
+ return vbt;
+
+ break;
}
- return bdb;
+ return NULL;
}
/**
- * intel_parse_bios - find VBT and initialize settings from the BIOS
- * @dev: DRM device
+ * intel_bios_init - find VBT and initialize settings from the BIOS
+ * @dev_priv: i915 device instance
*
* Loads the Video BIOS and checks that the VBT exists. Sets scratch registers
* to appropriate values.
* Returns 0 on success, nonzero on failure.
*/
int
-intel_parse_bios(struct drm_device *dev)
+intel_bios_init(struct drm_i915_private *dev_priv)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct pci_dev *pdev = dev->pdev;
- const struct bdb_header *bdb = NULL;
+ struct pci_dev *pdev = dev_priv->dev->pdev;
+ const struct vbt_header *vbt = dev_priv->opregion.vbt;
+ const struct bdb_header *bdb;
u8 __iomem *bios = NULL;
- if (HAS_PCH_NOP(dev))
+ if (HAS_PCH_NOP(dev_priv))
return -ENODEV;
init_vbt_defaults(dev_priv);
- /* XXX Should this validation be moved to intel_opregion.c? */
- if (!dmi_check_system(intel_no_opregion_vbt) && dev_priv->opregion.vbt)
- bdb = validate_vbt(dev_priv->opregion.header, OPREGION_SIZE,
- dev_priv->opregion.vbt, "OpRegion");
-
- if (bdb == NULL) {
+ if (!vbt) {
size_t size;
bios = pci_map_rom(pdev, &size);
if (!bios)
return -1;
- bdb = find_vbt(bios, size);
- if (!bdb) {
+ vbt = find_vbt(bios, size);
+ if (!vbt) {
pci_unmap_rom(pdev, bios);
return -1;
}
+
+ DRM_DEBUG_KMS("Found valid VBT in PCI ROM\n");
}
+ bdb = get_bdb_header(vbt);
+
+ DRM_DEBUG_KMS("VBT signature \"%.*s\", BDB version %d\n",
+ (int)sizeof(vbt->signature), vbt->signature, bdb->version);
+
/* Grab useful general definitions */
parse_general_features(dev_priv, bdb);
parse_general_definitions(dev_priv, bdb);
parse_driver_features(dev_priv, bdb);
parse_edp(dev_priv, bdb);
parse_psr(dev_priv, bdb);
- parse_mipi(dev_priv, bdb);
+ parse_mipi_config(dev_priv, bdb);
+ parse_mipi_sequence(dev_priv, bdb);
parse_ddi_ports(dev_priv, bdb);
if (bios)