u32 val;
bool cur_state;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
cur_state = val & DSI_PLL_VCO_EN;
I915_STATE_WARN(cur_state != state,
BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
/* Enable back the 10bit clock to display controller */
tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
tmp |= DPIO_DCLKP_EN;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
+ mutex_unlock(&dev_priv->sb_lock);
+
/*
* Need to wait > 100ns between dclkp clock enable bit and PLL enable.
*/
/* not sure when this should be written */
I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
POSTING_READ(DPLL_MD(pipe));
-
- mutex_unlock(&dev_priv->dpio_lock);
}
static int intel_num_dvo_pipes(struct drm_device *dev)
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
/* Disable 10bit clock to display controller */
val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
}
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
if (HAS_PCH_IBX(dev_priv->dev)) {
/*
- * make the BPC in transcoder be consistent with
- * that in pipeconf reg.
+ * Make the BPC in transcoder be consistent with
+ * that in pipeconf reg. For HDMI we must use 8bpc
+ * here for both 8bpc and 12bpc.
*/
val &= ~PIPECONF_BPC_MASK;
- val |= pipeconf_val & PIPECONF_BPC_MASK;
+ if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_HDMI))
+ val |= PIPECONF_8BPC;
+ else
+ val |= pipeconf_val & PIPECONF_BPC_MASK;
}
val &= ~TRANS_INTERLACE_MASK;
intel_wait_for_pipe_off(crtc);
}
-/*
- * Plane regs are double buffered, going from enabled->disabled needs a
- * trigger in order to latch. The display address reg provides this.
- */
-void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
- enum plane plane)
-{
- struct drm_device *dev = dev_priv->dev;
- u32 reg = INTEL_INFO(dev)->gen >= 4 ? DSPSURF(plane) : DSPADDR(plane);
-
- I915_WRITE(reg, I915_READ(reg));
- POSTING_READ(reg);
-}
-
/**
* intel_enable_primary_hw_plane - enable the primary plane on a given pipe
* @plane: plane to be enabled
u32 divsel, phaseinc, auxdiv, phasedir = 0;
u32 temp;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
/* It is necessary to ungate the pixclk gate prior to programming
* the divisors, and gate it back when it is done.
I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
temp &= ~(TRANS_DP_PORT_SEL_MASK |
TRANS_DP_SYNC_MASK |
TRANS_DP_BPC_MASK);
- temp |= (TRANS_DP_OUTPUT_ENABLE |
- TRANS_DP_ENH_FRAMING);
+ temp |= TRANS_DP_OUTPUT_ENABLE;
temp |= bpc << 9; /* same format but at 11:9 */
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
}
/* check colorkey */
- if (intel_plane && intel_plane->ckey.flags != I915_SET_COLORKEY_NONE) {
- DRM_DEBUG_KMS("PLANE:%d scaling with color key not allowed",
- intel_plane->base.base.id);
+ if (WARN_ON(intel_plane &&
+ intel_plane->ckey.flags != I915_SET_COLORKEY_NONE)) {
+ DRM_DEBUG_KMS("PLANE:%d scaling %ux%u->%ux%u not allowed with colorkey",
+ intel_plane->base.base.id, src_w, src_h, dst_w, dst_h);
return -EINVAL;
}
static void intel_crtc_enable_planes(struct drm_crtc *crtc)
{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+
intel_enable_primary_hw_plane(crtc->primary, crtc);
intel_enable_sprite_planes(crtc);
intel_crtc_update_cursor(crtc, true);
intel_post_enable_primary(crtc);
+
+ /*
+ * FIXME: Once we grow proper nuclear flip support out of this we need
+ * to compute the mask of flip planes precisely. For the time being
+ * consider this a flip to a NULL plane.
+ */
+ intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
}
static void intel_crtc_disable_planes(struct drm_crtc *crtc)
ironlake_pfit_disable(intel_crtc);
+ if (intel_crtc->config->has_pch_encoder)
+ ironlake_fdi_disable(crtc);
+
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->post_disable)
encoder->post_disable(encoder);
if (intel_crtc->config->has_pch_encoder) {
- ironlake_fdi_disable(crtc);
-
ironlake_disable_pch_transcoder(dev_priv, pipe);
if (HAS_PCH_CPT(dev)) {
intel_display_set_init_power(dev_priv, false);
}
-void broxton_set_cdclk(struct drm_device *dev, int frequency)
+static void intel_update_max_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (IS_SKYLAKE(dev)) {
+ u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
+
+ if (limit == SKL_DFSM_CDCLK_LIMIT_675)
+ dev_priv->max_cdclk_freq = 675000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
+ dev_priv->max_cdclk_freq = 540000;
+ else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
+ dev_priv->max_cdclk_freq = 450000;
+ else
+ dev_priv->max_cdclk_freq = 337500;
+ } else if (IS_BROADWELL(dev)) {
+ /*
+ * FIXME with extra cooling we can allow
+ * 540 MHz for ULX and 675 Mhz for ULT.
+ * How can we know if extra cooling is
+ * available? PCI ID, VTB, something else?
+ */
+ if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULX(dev))
+ dev_priv->max_cdclk_freq = 450000;
+ else if (IS_BDW_ULT(dev))
+ dev_priv->max_cdclk_freq = 540000;
+ else
+ dev_priv->max_cdclk_freq = 675000;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->max_cdclk_freq = 400000;
+ } else {
+ /* otherwise assume cdclk is fixed */
+ dev_priv->max_cdclk_freq = dev_priv->cdclk_freq;
+ }
+
+ DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n",
+ dev_priv->max_cdclk_freq);
+}
+
+static void intel_update_cdclk(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
+ DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
+ dev_priv->cdclk_freq);
+
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ if (IS_VALLEYVIEW(dev)) {
+ /*
+ * Program the gmbus_freq based on the cdclk frequency.
+ * BSpec erroneously claims we should aim for 4MHz, but
+ * in fact 1MHz is the correct frequency.
+ */
+ I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
+ }
+
+ if (dev_priv->max_cdclk_freq == 0)
+ intel_update_max_cdclk(dev);
+}
+
+static void broxton_set_cdclk(struct drm_device *dev, int frequency)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t divider;
return;
}
- dev_priv->cdclk_freq = frequency;
+ intel_update_cdclk(dev);
}
void broxton_init_cdclk(struct drm_device *dev)
intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
}
-/* returns HPLL frequency in kHz */
-static int valleyview_get_vco(struct drm_i915_private *dev_priv)
+static const struct skl_cdclk_entry {
+ unsigned int freq;
+ unsigned int vco;
+} skl_cdclk_frequencies[] = {
+ { .freq = 308570, .vco = 8640 },
+ { .freq = 337500, .vco = 8100 },
+ { .freq = 432000, .vco = 8640 },
+ { .freq = 450000, .vco = 8100 },
+ { .freq = 540000, .vco = 8100 },
+ { .freq = 617140, .vco = 8640 },
+ { .freq = 675000, .vco = 8100 },
+};
+
+static unsigned int skl_cdclk_decimal(unsigned int freq)
{
- int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
+ return (freq - 1000) / 500;
+}
- /* Obtain SKU information */
- mutex_lock(&dev_priv->dpio_lock);
- hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
- CCK_FUSE_HPLL_FREQ_MASK;
- mutex_unlock(&dev_priv->dpio_lock);
+static unsigned int skl_cdclk_get_vco(unsigned int freq)
+{
+ unsigned int i;
- return vco_freq[hpll_freq] * 1000;
+ for (i = 0; i < ARRAY_SIZE(skl_cdclk_frequencies); i++) {
+ const struct skl_cdclk_entry *e = &skl_cdclk_frequencies[i];
+
+ if (e->freq == freq)
+ return e->vco;
+ }
+
+ return 8100;
}
-static void vlv_update_cdclk(struct drm_device *dev)
+static void
+skl_dpll0_enable(struct drm_i915_private *dev_priv, unsigned int required_vco)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned int min_freq;
+ u32 val;
- dev_priv->cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
- DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz\n",
- dev_priv->cdclk_freq);
+ /* select the minimum CDCLK before enabling DPLL 0 */
+ val = I915_READ(CDCLK_CTL);
+ val &= ~CDCLK_FREQ_SEL_MASK | ~CDCLK_FREQ_DECIMAL_MASK;
+ val |= CDCLK_FREQ_337_308;
+
+ if (required_vco == 8640)
+ min_freq = 308570;
+ else
+ min_freq = 337500;
+
+ val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_freq);
+
+ I915_WRITE(CDCLK_CTL, val);
+ POSTING_READ(CDCLK_CTL);
/*
- * Program the gmbus_freq based on the cdclk frequency.
- * BSpec erroneously claims we should aim for 4MHz, but
- * in fact 1MHz is the correct frequency.
+ * We always enable DPLL0 with the lowest link rate possible, but still
+ * taking into account the VCO required to operate the eDP panel at the
+ * desired frequency. The usual DP link rates operate with a VCO of
+ * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
+ * The modeset code is responsible for the selection of the exact link
+ * rate later on, with the constraint of choosing a frequency that
+ * works with required_vco.
*/
- I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->cdclk_freq, 1000));
+ val = I915_READ(DPLL_CTRL1);
+
+ val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
+ DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
+ val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
+ if (required_vco == 8640)
+ val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
+ SKL_DPLL0);
+ else
+ val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
+ SKL_DPLL0);
+
+ I915_WRITE(DPLL_CTRL1, val);
+ POSTING_READ(DPLL_CTRL1);
+
+ I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
+
+ if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
+ DRM_ERROR("DPLL0 not locked\n");
+}
+
+static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
+{
+ int ret;
+ u32 val;
+
+ /* inform PCU we want to change CDCLK */
+ val = SKL_CDCLK_PREPARE_FOR_CHANGE;
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
+}
+
+static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
+{
+ unsigned int i;
+
+ for (i = 0; i < 15; i++) {
+ if (skl_cdclk_pcu_ready(dev_priv))
+ return true;
+ udelay(10);
+ }
+
+ return false;
+}
+
+static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
+{
+ struct drm_device *dev = dev_priv->dev;
+ u32 freq_select, pcu_ack;
+
+ DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
+
+ if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
+ DRM_ERROR("failed to inform PCU about cdclk change\n");
+ return;
+ }
+
+ /* set CDCLK_CTL */
+ switch(freq) {
+ case 450000:
+ case 432000:
+ freq_select = CDCLK_FREQ_450_432;
+ pcu_ack = 1;
+ break;
+ case 540000:
+ freq_select = CDCLK_FREQ_540;
+ pcu_ack = 2;
+ break;
+ case 308570:
+ case 337500:
+ default:
+ freq_select = CDCLK_FREQ_337_308;
+ pcu_ack = 0;
+ break;
+ case 617140:
+ case 675000:
+ freq_select = CDCLK_FREQ_675_617;
+ pcu_ack = 3;
+ break;
+ }
+
+ I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(freq));
+ POSTING_READ(CDCLK_CTL);
+
+ /* inform PCU of the change */
+ mutex_lock(&dev_priv->rps.hw_lock);
+ sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
+}
+
+void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
+{
+ /* disable DBUF power */
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
+ DRM_ERROR("DBuf power disable timeout\n");
+
+ /* disable DPLL0 */
+ I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
+ if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
+ DRM_ERROR("Couldn't disable DPLL0\n");
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
+}
+
+void skl_init_cdclk(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+ unsigned int required_vco;
+
+ /* enable PCH reset handshake */
+ val = I915_READ(HSW_NDE_RSTWRN_OPT);
+ I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
+
+ /* enable PG1 and Misc I/O */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
+
+ /* DPLL0 already enabed !? */
+ if (I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE) {
+ DRM_DEBUG_DRIVER("DPLL0 already running\n");
+ return;
+ }
+
+ /* enable DPLL0 */
+ required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
+ skl_dpll0_enable(dev_priv, required_vco);
+
+ /* set CDCLK to the frequency the BIOS chose */
+ skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
+
+ /* enable DBUF power */
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
+ DRM_ERROR("DBuf power enable timeout\n");
+}
+
+/* returns HPLL frequency in kHz */
+static int valleyview_get_vco(struct drm_i915_private *dev_priv)
+{
+ int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
+
+ /* Obtain SKU information */
+ mutex_lock(&dev_priv->sb_lock);
+ hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
+ CCK_FUSE_HPLL_FREQ_MASK;
+ mutex_unlock(&dev_priv->sb_lock);
+
+ return vco_freq[hpll_freq] * 1000;
}
/* Adjust CDclk dividers to allow high res or save power if possible */
}
mutex_unlock(&dev_priv->rps.hw_lock);
+ mutex_lock(&dev_priv->sb_lock);
+
if (cdclk == 400000) {
u32 divider;
divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
- mutex_lock(&dev_priv->dpio_lock);
/* adjust cdclk divider */
val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
val &= ~DISPLAY_FREQUENCY_VALUES;
DISPLAY_FREQUENCY_STATUS) == (divider << DISPLAY_FREQUENCY_STATUS_SHIFT),
50))
DRM_ERROR("timed out waiting for CDclk change\n");
- mutex_unlock(&dev_priv->dpio_lock);
}
- mutex_lock(&dev_priv->dpio_lock);
/* adjust self-refresh exit latency value */
val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
val &= ~0x7f;
else
val |= 3000 / 250; /* 3.0 usec */
vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
- mutex_unlock(&dev_priv->dpio_lock);
- vlv_update_cdclk(dev);
+ mutex_unlock(&dev_priv->sb_lock);
+
+ intel_update_cdclk(dev);
}
static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
}
mutex_unlock(&dev_priv->rps.hw_lock);
- vlv_update_cdclk(dev);
+ intel_update_cdclk(dev);
}
static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv,
return ret;
}
+static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
+ struct intel_crtc_state *pipe_config)
+{
+ if (pipe_config->pipe_bpp > 24)
+ return false;
+
+ /* HSW can handle pixel rate up to cdclk? */
+ if (IS_HASWELL(dev_priv->dev))
+ return true;
+
+ /*
+ * We compare against max which means we must take
+ * the increased cdclk requirement into account when
+ * calculating the new cdclk.
+ *
+ * Should measure whether using a lower cdclk w/o IPS
+ */
+ return ilk_pipe_pixel_rate(pipe_config) <=
+ dev_priv->max_cdclk_freq * 95 / 100;
+}
+
static void hsw_compute_ips_config(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
pipe_config->ips_enabled = i915.enable_ips &&
- hsw_crtc_supports_ips(crtc) &&
- pipe_config->pipe_bpp <= 24;
+ hsw_crtc_supports_ips(crtc) &&
+ pipe_config_supports_ips(dev_priv, pipe_config);
}
static int intel_crtc_compute_config(struct intel_crtc *crtc,
/* FIXME should check pixel clock limits on all platforms */
if (INTEL_INFO(dev)->gen < 4) {
- int clock_limit =
- dev_priv->display.get_display_clock_speed(dev);
+ int clock_limit = dev_priv->max_cdclk_freq;
/*
* Enable pixel doubling when the dot clock
uint32_t cdctl = I915_READ(CDCLK_CTL);
uint32_t linkrate;
- if (!(lcpll1 & LCPLL_PLL_ENABLE)) {
- WARN(1, "LCPLL1 not enabled\n");
+ if (!(lcpll1 & LCPLL_PLL_ENABLE))
return 24000; /* 24MHz is the cd freq with NSSC ref */
- }
if ((cdctl & CDCLK_FREQ_SEL_MASK) == CDCLK_FREQ_540)
return 540000;
if (dev_priv->hpll_freq == 0)
dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
divider = val & DISPLAY_FREQUENCY_VALUES;
return 266667;
}
-static int i855_get_display_clock_speed(struct drm_device *dev)
+static int i85x_get_display_clock_speed(struct drm_device *dev)
{
u16 hpllcc = 0;
+
+ /*
+ * 852GM/852GMV only supports 133 MHz and the HPLLCC
+ * encoding is different :(
+ * FIXME is this the right way to detect 852GM/852GMV?
+ */
+ if (dev->pdev->revision == 0x1)
+ return 133333;
+
+ pci_bus_read_config_word(dev->pdev->bus,
+ PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
+
/* Assume that the hardware is in the high speed state. This
* should be the default.
*/
switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
case GC_CLOCK_133_200:
+ case GC_CLOCK_133_200_2:
case GC_CLOCK_100_200:
return 200000;
case GC_CLOCK_166_250:
return 250000;
case GC_CLOCK_100_133:
return 133333;
+ case GC_CLOCK_133_266:
+ case GC_CLOCK_133_266_2:
+ case GC_CLOCK_166_266:
+ return 266667;
}
/* Shouldn't happen */
return 133333;
}
+static unsigned int intel_hpll_vco(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ static const unsigned int blb_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ [4] = 6400000,
+ };
+ static const unsigned int pnv_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ [4] = 2666667,
+ };
+ static const unsigned int cl_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 6400000,
+ [4] = 3333333,
+ [5] = 3566667,
+ [6] = 4266667,
+ };
+ static const unsigned int elk_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 4800000,
+ };
+ static const unsigned int ctg_vco[8] = {
+ [0] = 3200000,
+ [1] = 4000000,
+ [2] = 5333333,
+ [3] = 6400000,
+ [4] = 2666667,
+ [5] = 4266667,
+ };
+ const unsigned int *vco_table;
+ unsigned int vco;
+ uint8_t tmp = 0;
+
+ /* FIXME other chipsets? */
+ if (IS_GM45(dev))
+ vco_table = ctg_vco;
+ else if (IS_G4X(dev))
+ vco_table = elk_vco;
+ else if (IS_CRESTLINE(dev))
+ vco_table = cl_vco;
+ else if (IS_PINEVIEW(dev))
+ vco_table = pnv_vco;
+ else if (IS_G33(dev))
+ vco_table = blb_vco;
+ else
+ return 0;
+
+ tmp = I915_READ(IS_MOBILE(dev) ? HPLLVCO_MOBILE : HPLLVCO);
+
+ vco = vco_table[tmp & 0x7];
+ if (vco == 0)
+ DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp);
+ else
+ DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco);
+
+ return vco;
+}
+
+static int gm45_get_display_clock_speed(struct drm_device *dev)
+{
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = (tmp >> 12) & 0x1;
+
+ switch (vco) {
+ case 2666667:
+ case 4000000:
+ case 5333333:
+ return cdclk_sel ? 333333 : 222222;
+ case 3200000:
+ return cdclk_sel ? 320000 : 228571;
+ default:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", vco, tmp);
+ return 222222;
+ }
+}
+
+static int i965gm_get_display_clock_speed(struct drm_device *dev)
+{
+ static const uint8_t div_3200[] = { 16, 10, 8 };
+ static const uint8_t div_4000[] = { 20, 12, 10 };
+ static const uint8_t div_5333[] = { 24, 16, 14 };
+ const uint8_t *div_table;
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
+
+ if (cdclk_sel >= ARRAY_SIZE(div_3200))
+ goto fail;
+
+ switch (vco) {
+ case 3200000:
+ div_table = div_3200;
+ break;
+ case 4000000:
+ div_table = div_4000;
+ break;
+ case 5333333:
+ div_table = div_5333;
+ break;
+ default:
+ goto fail;
+ }
+
+ return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
+
+ fail:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", vco, tmp);
+ return 200000;
+}
+
+static int g33_get_display_clock_speed(struct drm_device *dev)
+{
+ static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 };
+ static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 };
+ static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 };
+ static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 };
+ const uint8_t *div_table;
+ unsigned int cdclk_sel, vco = intel_hpll_vco(dev);
+ uint16_t tmp = 0;
+
+ pci_read_config_word(dev->pdev, GCFGC, &tmp);
+
+ cdclk_sel = (tmp >> 4) & 0x7;
+
+ if (cdclk_sel >= ARRAY_SIZE(div_3200))
+ goto fail;
+
+ switch (vco) {
+ case 3200000:
+ div_table = div_3200;
+ break;
+ case 4000000:
+ div_table = div_4000;
+ break;
+ case 4800000:
+ div_table = div_4800;
+ break;
+ case 5333333:
+ div_table = div_5333;
+ break;
+ default:
+ goto fail;
+ }
+
+ return DIV_ROUND_CLOSEST(vco, div_table[cdclk_sel]);
+
+ fail:
+ DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", vco, tmp);
+ return 190476;
+}
+
static void
intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den)
{
u32 bestn, bestm1, bestm2, bestp1, bestp2;
u32 coreclk, reg_val;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
bestn = pipe_config->dpll.n;
bestm1 = pipe_config->dpll.m1;
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
static void chv_update_pll(struct intel_crtc *crtc,
I915_WRITE(dpll_reg,
pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
/* p1 and p2 divider */
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
DPIO_AFC_RECAL);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
/**
if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE))
return;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
clock.m2 = mdiv & DPIO_M2DIV_MASK;
u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2;
int refclk = 100000;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
clock.m2 = ((pll_dw0 & 0xff) << 22) | (pll_dw2 & 0x3fffff);
with_fdi, "LP PCH doesn't have FDI\n"))
with_fdi = false;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
tmp &= ~SBI_SSCCTL_DISABLE;
tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
/* Sequence to disable CLKOUT_DP */
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t reg, tmp;
- mutex_lock(&dev_priv->dpio_lock);
+ mutex_lock(&dev_priv->sb_lock);
reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
SBI_GEN0 : SBI_DBUFF0;
intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
}
- mutex_unlock(&dev_priv->dpio_lock);
+ mutex_unlock(&dev_priv->sb_lock);
}
static void lpt_init_pch_refclk(struct drm_device *dev)
}
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+ intel_update_cdclk(dev_priv->dev);
}
/*
broxton_set_cdclk(dev, req_cdclk);
}
+/* compute the max rate for new configuration */
+static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ int max_pixel_rate = 0;
+ int pixel_rate;
+
+ for_each_crtc(dev, crtc) {
+ if (!crtc->state->enable)
+ continue;
+
+ intel_crtc = to_intel_crtc(crtc);
+ pixel_rate = ilk_pipe_pixel_rate(intel_crtc->config);
+
+ /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
+ if (IS_BROADWELL(dev) && intel_crtc->config->ips_enabled)
+ pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
+
+ max_pixel_rate = max(max_pixel_rate, pixel_rate);
+ }
+
+ return max_pixel_rate;
+}
+
+static void broadwell_set_cdclk(struct drm_device *dev, int cdclk)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t val, data;
+ int ret;
+
+ if (WARN((I915_READ(LCPLL_CTL) &
+ (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+ LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
+ LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
+ LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+ "trying to change cdclk frequency with cdclk not enabled\n"))
+ return;
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = sandybridge_pcode_write(dev_priv,
+ BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+ if (ret) {
+ DRM_ERROR("failed to inform pcode about cdclk change\n");
+ return;
+ }
+
+ val = I915_READ(LCPLL_CTL);
+ val |= LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE, 1))
+ DRM_ERROR("Switching to FCLK failed\n");
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CLK_FREQ_MASK;
+
+ switch (cdclk) {
+ case 450000:
+ val |= LCPLL_CLK_FREQ_450;
+ data = 0;
+ break;
+ case 540000:
+ val |= LCPLL_CLK_FREQ_54O_BDW;
+ data = 1;
+ break;
+ case 337500:
+ val |= LCPLL_CLK_FREQ_337_5_BDW;
+ data = 2;
+ break;
+ case 675000:
+ val |= LCPLL_CLK_FREQ_675_BDW;
+ data = 3;
+ break;
+ default:
+ WARN(1, "invalid cdclk frequency\n");
+ return;
+ }
+
+ I915_WRITE(LCPLL_CTL, val);
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+ DRM_ERROR("Switching back to LCPLL failed\n");
+
+ mutex_lock(&dev_priv->rps.hw_lock);
+ sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ intel_update_cdclk(dev);
+
+ WARN(cdclk != dev_priv->cdclk_freq,
+ "cdclk requested %d kHz but got %d kHz\n",
+ cdclk, dev_priv->cdclk_freq);
+}
+
+static int broadwell_calc_cdclk(struct drm_i915_private *dev_priv,
+ int max_pixel_rate)
+{
+ int cdclk;
+
+ /*
+ * FIXME should also account for plane ratio
+ * once 64bpp pixel formats are supported.
+ */
+ if (max_pixel_rate > 540000)
+ cdclk = 675000;
+ else if (max_pixel_rate > 450000)
+ cdclk = 540000;
+ else if (max_pixel_rate > 337500)
+ cdclk = 450000;
+ else
+ cdclk = 337500;
+
+ /*
+ * FIXME move the cdclk caclulation to
+ * compute_config() so we can fail gracegully.
+ */
+ if (cdclk > dev_priv->max_cdclk_freq) {
+ DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+ cdclk, dev_priv->max_cdclk_freq);
+ cdclk = dev_priv->max_cdclk_freq;
+ }
+
+ return cdclk;
+}
+
+static int broadwell_modeset_global_pipes(struct drm_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ int max_pixclk = ilk_max_pixel_rate(dev_priv);
+ int cdclk, i;
+
+ cdclk = broadwell_calc_cdclk(dev_priv, max_pixclk);
+
+ if (cdclk == dev_priv->cdclk_freq)
+ return 0;
+
+ /* add all active pipes to the state */
+ for_each_crtc(state->dev, crtc) {
+ if (!crtc->state->enable)
+ continue;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+ }
+
+ /* disable/enable all currently active pipes while we change cdclk */
+ for_each_crtc_in_state(state, crtc, crtc_state, i)
+ if (crtc_state->enable)
+ crtc_state->mode_changed = true;
+
+ return 0;
+}
+
+static void broadwell_modeset_global_resources(struct drm_atomic_state *state)
+{
+ struct drm_device *dev = state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
+ int req_cdclk = broadwell_calc_cdclk(dev_priv, max_pixel_rate);
+
+ if (req_cdclk != dev_priv->cdclk_freq)
+ broadwell_set_cdclk(dev, req_cdclk);
+}
+
static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
else if (i915.enable_execlists)
return true;
else
- return ring != i915_gem_request_get_ring(obj->last_read_req);
+ return ring != i915_gem_request_get_ring(obj->last_write_req);
}
static void skl_do_mmio_flip(struct intel_crtc *intel_crtc)
struct intel_mmio_flip *mmio_flip =
container_of(work, struct intel_mmio_flip, work);
- if (mmio_flip->rq)
- WARN_ON(__i915_wait_request(mmio_flip->rq,
+ if (mmio_flip->req)
+ WARN_ON(__i915_wait_request(mmio_flip->req,
mmio_flip->crtc->reset_counter,
- false, NULL, NULL));
+ false, NULL,
+ &mmio_flip->i915->rps.mmioflips));
intel_do_mmio_flip(mmio_flip->crtc);
- i915_gem_request_unreference__unlocked(mmio_flip->rq);
+ i915_gem_request_unreference__unlocked(mmio_flip->req);
kfree(mmio_flip);
}
if (mmio_flip == NULL)
return -ENOMEM;
- mmio_flip->rq = i915_gem_request_reference(obj->last_write_req);
+ mmio_flip->i915 = to_i915(dev);
+ mmio_flip->req = i915_gem_request_reference(obj->last_write_req);
mmio_flip->crtc = to_intel_crtc(crtc);
INIT_WORK(&mmio_flip->work, intel_mmio_flip_work_func);
} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
ring = &dev_priv->ring[BCS];
} else if (INTEL_INFO(dev)->gen >= 7) {
- ring = i915_gem_request_get_ring(obj->last_read_req);
+ ring = i915_gem_request_get_ring(obj->last_write_req);
if (ring == NULL || ring->id != RCS)
ring = &dev_priv->ring[BCS];
} else {
*/
ret = intel_pin_and_fence_fb_obj(crtc->primary, fb,
crtc->primary->state,
- mmio_flip ? i915_gem_request_get_ring(obj->last_read_req) : ring);
+ mmio_flip ? i915_gem_request_get_ring(obj->last_write_req) : ring);
if (ret)
goto cleanup_pending;
if (!intel_encoder->base.crtc)
continue;
- for_each_crtc_in_state(state, crtc, crtc_state, i)
- if (crtc == intel_encoder->base.crtc)
- break;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (crtc != intel_encoder->base.crtc)
+ continue;
- if (crtc != intel_encoder->base.crtc)
- continue;
+ if (crtc_state->enable && needs_modeset(crtc_state))
+ intel_encoder->connectors_active = false;
- if (crtc_state->enable && needs_modeset(crtc_state))
- intel_encoder->connectors_active = false;
+ break;
+ }
}
drm_atomic_helper_swap_state(state->dev, state);
if (!connector->encoder || !connector->encoder->crtc)
continue;
- for_each_crtc_in_state(state, crtc, crtc_state, i)
- if (crtc == connector->encoder->crtc)
- break;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (crtc != connector->encoder->crtc)
+ continue;
- if (crtc != connector->encoder->crtc)
- continue;
+ if (crtc->state->enable && needs_modeset(crtc->state)) {
+ struct drm_property *dpms_property =
+ dev->mode_config.dpms_property;
- if (crtc->state->enable && needs_modeset(crtc->state)) {
- struct drm_property *dpms_property =
- dev->mode_config.dpms_property;
+ connector->dpms = DRM_MODE_DPMS_ON;
+ drm_object_property_set_value(&connector->base,
+ dpms_property,
+ DRM_MODE_DPMS_ON);
- connector->dpms = DRM_MODE_DPMS_ON;
- drm_object_property_set_value(&connector->base,
- dpms_property,
- DRM_MODE_DPMS_ON);
+ intel_encoder = to_intel_encoder(connector->encoder);
+ intel_encoder->connectors_active = true;
+ }
- intel_encoder = to_intel_encoder(connector->encoder);
- intel_encoder->connectors_active = true;
+ break;
}
}
* mode set on this crtc. For other crtcs we need to use the
* adjusted_mode bits in the crtc directly.
*/
- if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
- ret = valleyview_modeset_global_pipes(state);
+ if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev) || IS_BROADWELL(dev)) {
+ if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev))
+ ret = valleyview_modeset_global_pipes(state);
+ else
+ ret = broadwell_modeset_global_pipes(state);
+
if (ret)
return ret;
}
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ intel_update_cdclk(dev);
+
if (HAS_DDI(dev))
intel_ddi_pll_init(dev);
else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
if (INTEL_INFO(dev)->gen >= 9) {
- min_scale = 1;
- max_scale = skl_max_scale(intel_crtc, crtc_state);
+ /* use scaler when colorkey is not required */
+ if (to_intel_plane(plane)->ckey.flags == I915_SET_COLORKEY_NONE) {
+ min_scale = 1;
+ max_scale = skl_max_scale(intel_crtc, crtc_state);
+ }
can_position = true;
}
dev_priv->display.get_display_clock_speed =
ilk_get_display_clock_speed;
else if (IS_I945G(dev) || IS_BROADWATER(dev) ||
- IS_GEN6(dev) || IS_IVYBRIDGE(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
+ IS_GEN6(dev) || IS_IVYBRIDGE(dev))
dev_priv->display.get_display_clock_speed =
i945_get_display_clock_speed;
+ else if (IS_GM45(dev))
+ dev_priv->display.get_display_clock_speed =
+ gm45_get_display_clock_speed;
+ else if (IS_CRESTLINE(dev))
+ dev_priv->display.get_display_clock_speed =
+ i965gm_get_display_clock_speed;
+ else if (IS_PINEVIEW(dev))
+ dev_priv->display.get_display_clock_speed =
+ pnv_get_display_clock_speed;
+ else if (IS_G33(dev) || IS_G4X(dev))
+ dev_priv->display.get_display_clock_speed =
+ g33_get_display_clock_speed;
else if (IS_I915G(dev))
dev_priv->display.get_display_clock_speed =
i915_get_display_clock_speed;
i865_get_display_clock_speed;
else if (IS_I85X(dev))
dev_priv->display.get_display_clock_speed =
- i855_get_display_clock_speed;
- else /* 852, 830 */
+ i85x_get_display_clock_speed;
+ else { /* 830 */
+ WARN(!IS_I830(dev), "Unknown platform. Assuming 133 MHz CDCLK\n");
dev_priv->display.get_display_clock_speed =
i830_get_display_clock_speed;
+ }
if (IS_GEN5(dev)) {
dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+ if (IS_BROADWELL(dev))
+ dev_priv->display.modeset_global_resources =
+ broadwell_modeset_global_resources;
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->display.modeset_global_resources =
valleyview_modeset_global_resources;
void intel_modeset_init_hw(struct drm_device *dev)
{
+ intel_update_cdclk(dev);
intel_prepare_ddi(dev);
-
- if (IS_VALLEYVIEW(dev))
- vlv_update_cdclk(dev);
-
intel_init_clock_gating(dev);
-
intel_enable_gt_powersave(dev);
}
projects / mirror_ubuntu-bionic-kernel.git / blobdiff