* See vlv_power_sequencer_reset() why we need
* a power domain reference here.
*/
- power_domain = intel_display_port_power_domain(encoder);
+ power_domain = intel_display_port_aux_power_domain(encoder);
intel_display_power_get(dev_priv, power_domain);
mutex_lock(&dev_priv->pps_mutex);
mutex_unlock(&dev_priv->pps_mutex);
- power_domain = intel_display_port_power_domain(encoder);
+ power_domain = intel_display_port_aux_power_domain(encoder);
intel_display_power_put(dev_priv, power_domain);
}
}
}
-static u32 _pp_ctrl_reg(struct intel_dp *intel_dp)
+static i915_reg_t
+_pp_ctrl_reg(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp));
}
-static u32 _pp_stat_reg(struct intel_dp *intel_dp)
+static i915_reg_t
+_pp_stat_reg(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (IS_VALLEYVIEW(dev)) {
enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
- u32 pp_ctrl_reg, pp_div_reg;
+ i915_reg_t pp_ctrl_reg, pp_div_reg;
u32 pp_div;
pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
+ i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg;
uint32_t status;
bool done;
else
precharge = 5;
- if (IS_BROADWELL(dev) && intel_dp->aux_ch_ctl_reg == DPA_AUX_CH_CTL)
+ if (IS_BROADWELL(dev) && intel_dig_port->port == PORT_A)
timeout = DP_AUX_CH_CTL_TIME_OUT_600us;
else
timeout = DP_AUX_CH_CTL_TIME_OUT_400us;
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
- uint32_t ch_data = ch_ctl + 4;
+ i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg;
uint32_t aux_clock_divider;
int i, ret, recv_bytes;
uint32_t status;
intel_dp_check_edp(intel_dp);
- intel_aux_display_runtime_get(dev_priv);
-
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
status = I915_READ_NOTRACE(ch_ctl);
for (try = 0; try < 5; try++) {
/* Load the send data into the aux channel data registers */
for (i = 0; i < send_bytes; i += 4)
- I915_WRITE(ch_data + i,
+ I915_WRITE(intel_dp->aux_ch_data_reg[i >> 2],
intel_dp_pack_aux(send + i,
send_bytes - i));
recv_bytes = recv_size;
for (i = 0; i < recv_bytes; i += 4)
- intel_dp_unpack_aux(I915_READ(ch_data + i),
+ intel_dp_unpack_aux(I915_READ(intel_dp->aux_ch_data_reg[i >> 2]),
recv + i, recv_bytes - i);
ret = recv_bytes;
out:
pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
- intel_aux_display_runtime_put(dev_priv);
if (vdd)
edp_panel_vdd_off(intel_dp, false);
return ret;
}
-static void
-intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
+static i915_reg_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv,
+ enum port port)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- enum port port = intel_dig_port->port;
- struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
- const char *name = NULL;
- uint32_t porte_aux_ctl_reg = DPA_AUX_CH_CTL;
- int ret;
+ switch (port) {
+ case PORT_B:
+ case PORT_C:
+ case PORT_D:
+ return DP_AUX_CH_CTL(port);
+ default:
+ MISSING_CASE(port);
+ return DP_AUX_CH_CTL(PORT_B);
+ }
+}
- /* On SKL we don't have Aux for port E so we rely on VBT to set
- * a proper alternate aux channel.
- */
- if (IS_SKYLAKE(dev) && port == PORT_E) {
- switch (info->alternate_aux_channel) {
- case DP_AUX_B:
- porte_aux_ctl_reg = DPB_AUX_CH_CTL;
- break;
- case DP_AUX_C:
- porte_aux_ctl_reg = DPC_AUX_CH_CTL;
- break;
- case DP_AUX_D:
- porte_aux_ctl_reg = DPD_AUX_CH_CTL;
- break;
- case DP_AUX_A:
- default:
- porte_aux_ctl_reg = DPA_AUX_CH_CTL;
- }
+static i915_reg_t g4x_aux_data_reg(struct drm_i915_private *dev_priv,
+ enum port port, int index)
+{
+ switch (port) {
+ case PORT_B:
+ case PORT_C:
+ case PORT_D:
+ return DP_AUX_CH_DATA(port, index);
+ default:
+ MISSING_CASE(port);
+ return DP_AUX_CH_DATA(PORT_B, index);
}
+}
+static i915_reg_t ilk_aux_ctl_reg(struct drm_i915_private *dev_priv,
+ enum port port)
+{
switch (port) {
case PORT_A:
- intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
- name = "DPDDC-A";
- break;
+ return DP_AUX_CH_CTL(port);
case PORT_B:
- intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
- name = "DPDDC-B";
- break;
case PORT_C:
- intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
- name = "DPDDC-C";
- break;
case PORT_D:
- intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
- name = "DPDDC-D";
- break;
- case PORT_E:
- intel_dp->aux_ch_ctl_reg = porte_aux_ctl_reg;
- name = "DPDDC-E";
- break;
+ return PCH_DP_AUX_CH_CTL(port);
default:
- BUG();
+ MISSING_CASE(port);
+ return DP_AUX_CH_CTL(PORT_A);
}
+}
- /*
- * The AUX_CTL register is usually DP_CTL + 0x10.
- *
- * On Haswell and Broadwell though:
- * - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
- * - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
- *
- * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
- */
- if (!IS_HASWELL(dev) && !IS_BROADWELL(dev) && port != PORT_E)
- intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
+static i915_reg_t ilk_aux_data_reg(struct drm_i915_private *dev_priv,
+ enum port port, int index)
+{
+ switch (port) {
+ case PORT_A:
+ return DP_AUX_CH_DATA(port, index);
+ case PORT_B:
+ case PORT_C:
+ case PORT_D:
+ return PCH_DP_AUX_CH_DATA(port, index);
+ default:
+ MISSING_CASE(port);
+ return DP_AUX_CH_DATA(PORT_A, index);
+ }
+}
+
+/*
+ * On SKL we don't have Aux for port E so we rely
+ * on VBT to set a proper alternate aux channel.
+ */
+static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv)
+{
+ const struct ddi_vbt_port_info *info =
+ &dev_priv->vbt.ddi_port_info[PORT_E];
+
+ switch (info->alternate_aux_channel) {
+ case DP_AUX_A:
+ return PORT_A;
+ case DP_AUX_B:
+ return PORT_B;
+ case DP_AUX_C:
+ return PORT_C;
+ case DP_AUX_D:
+ return PORT_D;
+ default:
+ MISSING_CASE(info->alternate_aux_channel);
+ return PORT_A;
+ }
+}
+
+static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
+ enum port port)
+{
+ if (port == PORT_E)
+ port = skl_porte_aux_port(dev_priv);
+
+ switch (port) {
+ case PORT_A:
+ case PORT_B:
+ case PORT_C:
+ case PORT_D:
+ return DP_AUX_CH_CTL(port);
+ default:
+ MISSING_CASE(port);
+ return DP_AUX_CH_CTL(PORT_A);
+ }
+}
+
+static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv,
+ enum port port, int index)
+{
+ if (port == PORT_E)
+ port = skl_porte_aux_port(dev_priv);
+
+ switch (port) {
+ case PORT_A:
+ case PORT_B:
+ case PORT_C:
+ case PORT_D:
+ return DP_AUX_CH_DATA(port, index);
+ default:
+ MISSING_CASE(port);
+ return DP_AUX_CH_DATA(PORT_A, index);
+ }
+}
+
+static i915_reg_t intel_aux_ctl_reg(struct drm_i915_private *dev_priv,
+ enum port port)
+{
+ if (INTEL_INFO(dev_priv)->gen >= 9)
+ return skl_aux_ctl_reg(dev_priv, port);
+ else if (HAS_PCH_SPLIT(dev_priv))
+ return ilk_aux_ctl_reg(dev_priv, port);
+ else
+ return g4x_aux_ctl_reg(dev_priv, port);
+}
+
+static i915_reg_t intel_aux_data_reg(struct drm_i915_private *dev_priv,
+ enum port port, int index)
+{
+ if (INTEL_INFO(dev_priv)->gen >= 9)
+ return skl_aux_data_reg(dev_priv, port, index);
+ else if (HAS_PCH_SPLIT(dev_priv))
+ return ilk_aux_data_reg(dev_priv, port, index);
+ else
+ return g4x_aux_data_reg(dev_priv, port, index);
+}
+
+static void intel_aux_reg_init(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp));
+ enum port port = dp_to_dig_port(intel_dp)->port;
+ int i;
+
+ intel_dp->aux_ch_ctl_reg = intel_aux_ctl_reg(dev_priv, port);
+ for (i = 0; i < ARRAY_SIZE(intel_dp->aux_ch_data_reg); i++)
+ intel_dp->aux_ch_data_reg[i] = intel_aux_data_reg(dev_priv, port, i);
+}
+
+static void
+intel_dp_aux_fini(struct intel_dp *intel_dp)
+{
+ drm_dp_aux_unregister(&intel_dp->aux);
+ kfree(intel_dp->aux.name);
+}
+
+static int
+intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
+{
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ enum port port = intel_dig_port->port;
+ int ret;
+
+ intel_aux_reg_init(intel_dp);
+
+ intel_dp->aux.name = kasprintf(GFP_KERNEL, "DPDDC-%c", port_name(port));
+ if (!intel_dp->aux.name)
+ return -ENOMEM;
- intel_dp->aux.name = name;
intel_dp->aux.dev = dev->dev;
intel_dp->aux.transfer = intel_dp_aux_transfer;
- DRM_DEBUG_KMS("registering %s bus for %s\n", name,
+ DRM_DEBUG_KMS("registering %s bus for %s\n",
+ intel_dp->aux.name,
connector->base.kdev->kobj.name);
ret = drm_dp_aux_register(&intel_dp->aux);
if (ret < 0) {
DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
- name, ret);
- return;
+ intel_dp->aux.name, ret);
+ kfree(intel_dp->aux.name);
+ return ret;
}
ret = sysfs_create_link(&connector->base.kdev->kobj,
&intel_dp->aux.ddc.dev.kobj,
intel_dp->aux.ddc.dev.kobj.name);
if (ret < 0) {
- DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
- drm_dp_aux_unregister(&intel_dp->aux);
+ DRM_ERROR("sysfs_create_link() for %s failed (%d)\n",
+ intel_dp->aux.name, ret);
+ intel_dp_aux_fini(intel_dp);
+ return ret;
}
+
+ return 0;
}
static void
return (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
}
-static bool intel_dp_source_supports_hbr2(struct drm_device *dev)
+bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp)
{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+
/* WaDisableHBR2:skl */
- if (IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_B0)
+ if (IS_SKL_REVID(dev, 0, SKL_REVID_B0))
return false;
if ((IS_HASWELL(dev) && !IS_HSW_ULX(dev)) || IS_BROADWELL(dev) ||
}
static int
-intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
+intel_dp_source_rates(struct intel_dp *intel_dp, const int **source_rates)
{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
int size;
if (IS_BROXTON(dev)) {
*source_rates = bxt_rates;
size = ARRAY_SIZE(bxt_rates);
- } else if (IS_SKYLAKE(dev)) {
+ } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
*source_rates = skl_rates;
size = ARRAY_SIZE(skl_rates);
} else {
}
/* This depends on the fact that 5.4 is last value in the array */
- if (!intel_dp_source_supports_hbr2(dev))
+ if (!intel_dp_source_supports_hbr2(intel_dp))
size--;
return size;
static int intel_dp_common_rates(struct intel_dp *intel_dp,
int *common_rates)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
const int *source_rates, *sink_rates;
int source_len, sink_len;
sink_len = intel_dp_sink_rates(intel_dp, &sink_rates);
- source_len = intel_dp_source_rates(dev, &source_rates);
+ source_len = intel_dp_source_rates(intel_dp, &source_rates);
return intersect_rates(source_rates, source_len,
sink_rates, sink_len,
static void intel_dp_print_rates(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
const int *source_rates, *sink_rates;
int source_len, sink_len, common_len;
int common_rates[DP_MAX_SUPPORTED_RATES];
if ((drm_debug & DRM_UT_KMS) == 0)
return;
- source_len = intel_dp_source_rates(dev, &source_rates);
+ source_len = intel_dp_source_rates(intel_dp, &source_rates);
snprintf_int_array(str, sizeof(str), source_rates, source_len);
DRM_DEBUG_KMS("source rates: %s\n", str);
return rate_to_index(rate, intel_dp->sink_rates);
}
-static void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
- uint8_t *link_bw, uint8_t *rate_select)
+void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
+ uint8_t *link_bw, uint8_t *rate_select)
{
if (intel_dp->num_sink_rates) {
*link_bw = 0;
return ret;
}
- if (!HAS_PCH_SPLIT(dev))
+ if (HAS_GMCH_DISPLAY(dev))
intel_gmch_panel_fitting(intel_crtc, pipe_config,
intel_connector->panel.fitting_mode);
else
&pipe_config->dp_m2_n2);
}
- if (IS_SKYLAKE(dev) && is_edp(intel_dp))
+ if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) && is_edp(intel_dp))
skl_edp_set_pll_config(pipe_config);
else if (IS_BROXTON(dev))
/* handled in ddi */;
return true;
}
-static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
-
- DRM_DEBUG_KMS("eDP PLL enable for clock %d\n",
- crtc->config->port_clock);
- dpa_ctl = I915_READ(DP_A);
- dpa_ctl &= ~DP_PLL_FREQ_MASK;
-
- if (crtc->config->port_clock == 162000) {
- /* For a long time we've carried around a ILK-DevA w/a for the
- * 160MHz clock. If we're really unlucky, it's still required.
- */
- DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
- dpa_ctl |= DP_PLL_FREQ_160MHZ;
- intel_dp->DP |= DP_PLL_FREQ_160MHZ;
- } else {
- dpa_ctl |= DP_PLL_FREQ_270MHZ;
- intel_dp->DP |= DP_PLL_FREQ_270MHZ;
- }
-
- I915_WRITE(DP_A, dpa_ctl);
-
- POSTING_READ(DP_A);
- udelay(500);
-}
-
void intel_dp_set_link_params(struct intel_dp *intel_dp,
const struct intel_crtc_state *pipe_config)
{
intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
intel_dp->DP |= DP_PORT_WIDTH(crtc->config->lane_count);
- if (crtc->config->has_audio)
- intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
-
/* Split out the IBX/CPU vs CPT settings */
if (IS_GEN7(dev) && port == PORT_A) {
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 pp_stat_reg, pp_ctrl_reg;
+ i915_reg_t pp_stat_reg, pp_ctrl_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
u32 pp;
- u32 pp_stat_reg, pp_ctrl_reg;
+ i915_reg_t pp_stat_reg, pp_ctrl_reg;
bool need_to_disable = !intel_dp->want_panel_vdd;
lockdep_assert_held(&dev_priv->pps_mutex);
if (edp_have_panel_vdd(intel_dp))
return need_to_disable;
- power_domain = intel_display_port_power_domain(intel_encoder);
+ power_domain = intel_display_port_aux_power_domain(intel_encoder);
intel_display_power_get(dev_priv, power_domain);
DRM_DEBUG_KMS("Turning eDP port %c VDD on\n",
struct intel_encoder *intel_encoder = &intel_dig_port->base;
enum intel_display_power_domain power_domain;
u32 pp;
- u32 pp_stat_reg, pp_ctrl_reg;
+ i915_reg_t pp_stat_reg, pp_ctrl_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
if ((pp & POWER_TARGET_ON) == 0)
intel_dp->last_power_cycle = jiffies;
- power_domain = intel_display_port_power_domain(intel_encoder);
+ power_domain = intel_display_port_aux_power_domain(intel_encoder);
intel_display_power_put(dev_priv, power_domain);
}
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
- u32 pp_ctrl_reg;
+ i915_reg_t pp_ctrl_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
struct drm_i915_private *dev_priv = dev->dev_private;
enum intel_display_power_domain power_domain;
u32 pp;
- u32 pp_ctrl_reg;
+ i915_reg_t pp_ctrl_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
wait_panel_off(intel_dp);
/* We got a reference when we enabled the VDD. */
- power_domain = intel_display_port_power_domain(intel_encoder);
+ power_domain = intel_display_port_aux_power_domain(intel_encoder);
intel_display_power_put(dev_priv, power_domain);
}
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
- u32 pp_ctrl_reg;
+ i915_reg_t pp_ctrl_reg;
/*
* If we enable the backlight right away following a panel power
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
- u32 pp_ctrl_reg;
+ i915_reg_t pp_ctrl_reg;
if (!is_edp(intel_dp))
return;
_intel_edp_backlight_off(intel_dp);
}
+static const char *state_string(bool enabled)
+{
+ return enabled ? "on" : "off";
+}
+
+static void assert_dp_port(struct intel_dp *intel_dp, bool state)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
+ bool cur_state = I915_READ(intel_dp->output_reg) & DP_PORT_EN;
+
+ I915_STATE_WARN(cur_state != state,
+ "DP port %c state assertion failure (expected %s, current %s)\n",
+ port_name(dig_port->port),
+ state_string(state), state_string(cur_state));
+}
+#define assert_dp_port_disabled(d) assert_dp_port((d), false)
+
+static void assert_edp_pll(struct drm_i915_private *dev_priv, bool state)
+{
+ bool cur_state = I915_READ(DP_A) & DP_PLL_ENABLE;
+
+ I915_STATE_WARN(cur_state != state,
+ "eDP PLL state assertion failure (expected %s, current %s)\n",
+ state_string(state), state_string(cur_state));
+}
+#define assert_edp_pll_enabled(d) assert_edp_pll((d), true)
+#define assert_edp_pll_disabled(d) assert_edp_pll((d), false)
+
static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- assert_pipe_disabled(dev_priv,
- to_intel_crtc(crtc)->pipe);
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+ assert_dp_port_disabled(intel_dp);
+ assert_edp_pll_disabled(dev_priv);
+
+ DRM_DEBUG_KMS("enabling eDP PLL for clock %d\n",
+ crtc->config->port_clock);
+
+ intel_dp->DP &= ~DP_PLL_FREQ_MASK;
+
+ if (crtc->config->port_clock == 162000)
+ intel_dp->DP |= DP_PLL_FREQ_162MHZ;
+ else
+ intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+
+ I915_WRITE(DP_A, intel_dp->DP);
+ POSTING_READ(DP_A);
+ udelay(500);
- DRM_DEBUG_KMS("\n");
- dpa_ctl = I915_READ(DP_A);
- WARN(dpa_ctl & DP_PLL_ENABLE, "dp pll on, should be off\n");
- WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n");
-
- /* We don't adjust intel_dp->DP while tearing down the link, to
- * facilitate link retraining (e.g. after hotplug). Hence clear all
- * enable bits here to ensure that we don't enable too much. */
- intel_dp->DP &= ~(DP_PORT_EN | DP_AUDIO_OUTPUT_ENABLE);
intel_dp->DP |= DP_PLL_ENABLE;
+
I915_WRITE(DP_A, intel_dp->DP);
POSTING_READ(DP_A);
udelay(200);
static void ironlake_edp_pll_off(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- assert_pipe_disabled(dev_priv,
- to_intel_crtc(crtc)->pipe);
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+ assert_dp_port_disabled(intel_dp);
+ assert_edp_pll_enabled(dev_priv);
- dpa_ctl = I915_READ(DP_A);
- WARN((dpa_ctl & DP_PLL_ENABLE) == 0,
- "dp pll off, should be on\n");
- WARN(dpa_ctl & DP_PORT_EN, "dp port still on, should be off\n");
+ DRM_DEBUG_KMS("disabling eDP PLL\n");
- /* We can't rely on the value tracked for the DP register in
- * intel_dp->DP because link_down must not change that (otherwise link
- * re-training will fail. */
- dpa_ctl &= ~DP_PLL_ENABLE;
- I915_WRITE(DP_A, dpa_ctl);
+ intel_dp->DP &= ~DP_PLL_ENABLE;
+
+ I915_WRITE(DP_A, intel_dp->DP);
POSTING_READ(DP_A);
udelay(200);
}
}
DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n",
- intel_dp->output_reg);
+ i915_mmio_reg_offset(intel_dp->output_reg));
} else if (IS_CHERRYVIEW(dev)) {
*pipe = DP_PORT_TO_PIPE_CHV(tmp);
} else {
intel_dp_get_m_n(crtc, pipe_config);
if (port == PORT_A) {
- if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ)
+ if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_162MHZ)
pipe_config->port_clock = 162000;
else
pipe_config->port_clock = 270000;
enum port port = dp_to_dig_port(intel_dp)->port;
intel_dp_link_down(intel_dp);
+
+ /* Only ilk+ has port A */
if (port == PORT_A)
ironlake_edp_pll_off(intel_dp);
}
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *crtc =
+ to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
/* enable with pattern 1 (as per spec) */
_intel_dp_set_link_train(intel_dp, &intel_dp->DP,
* fail when the power sequencer is freshly used for this port.
*/
intel_dp->DP |= DP_PORT_EN;
+ if (crtc->config->has_audio)
+ intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
I915_WRITE(intel_dp->output_reg, intel_dp->DP);
POSTING_READ(intel_dp->output_reg);
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
uint32_t dp_reg = I915_READ(intel_dp->output_reg);
+ enum port port = dp_to_dig_port(intel_dp)->port;
+ enum pipe pipe = crtc->pipe;
if (WARN_ON(dp_reg & DP_PORT_EN))
return;
intel_dp_enable_port(intel_dp);
+ if (port == PORT_A && IS_GEN5(dev_priv)) {
+ /*
+ * Underrun reporting for the other pipe was disabled in
+ * g4x_pre_enable_dp(). The eDP PLL and port have now been
+ * enabled, so it's now safe to re-enable underrun reporting.
+ */
+ intel_wait_for_vblank_if_active(dev_priv->dev, !pipe);
+ intel_set_cpu_fifo_underrun_reporting(dev_priv, !pipe, true);
+ intel_set_pch_fifo_underrun_reporting(dev_priv, !pipe, true);
+ }
+
edp_panel_vdd_on(intel_dp);
edp_panel_on(intel_dp);
edp_panel_vdd_off(intel_dp, true);
if (crtc->config->has_audio) {
DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
- pipe_name(crtc->pipe));
+ pipe_name(pipe));
intel_audio_codec_enable(encoder);
}
}
static void g4x_pre_enable_dp(struct intel_encoder *encoder)
{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
- struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
+ enum port port = dp_to_dig_port(intel_dp)->port;
+ enum pipe pipe = to_intel_crtc(encoder->base.crtc)->pipe;
intel_dp_prepare(encoder);
+ if (port == PORT_A && IS_GEN5(dev_priv)) {
+ /*
+ * We get FIFO underruns on the other pipe when
+ * enabling the CPU eDP PLL, and when enabling CPU
+ * eDP port. We could potentially avoid the PLL
+ * underrun with a vblank wait just prior to enabling
+ * the PLL, but that doesn't appear to help the port
+ * enable case. Just sweep it all under the rug.
+ */
+ intel_set_cpu_fifo_underrun_reporting(dev_priv, !pipe, false);
+ intel_set_pch_fifo_underrun_reporting(dev_priv, !pipe, false);
+ }
+
/* Only ilk+ has port A */
- if (dport->port == PORT_A) {
- ironlake_set_pll_cpu_edp(intel_dp);
+ if (port == PORT_A)
ironlake_edp_pll_on(intel_dp);
- }
}
static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = intel_dig_port->base.base.dev->dev_private;
enum pipe pipe = intel_dp->pps_pipe;
- int pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
+ i915_reg_t pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
edp_panel_vdd_off_sync(intel_dp);
* Fetch AUX CH registers 0x202 - 0x207 which contain
* link status information
*/
-static bool
+bool
intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
{
return intel_dp_dpcd_read_wake(&intel_dp->aux,
}
/* These are source-specific values. */
-static uint8_t
+uint8_t
intel_dp_voltage_max(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
}
-static uint8_t
+uint8_t
intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
return 0;
}
-static void
-intel_get_adjust_train(struct intel_dp *intel_dp,
- const uint8_t link_status[DP_LINK_STATUS_SIZE])
-{
- uint8_t v = 0;
- uint8_t p = 0;
- int lane;
- uint8_t voltage_max;
- uint8_t preemph_max;
-
- for (lane = 0; lane < intel_dp->lane_count; lane++) {
- uint8_t this_v = drm_dp_get_adjust_request_voltage(link_status, lane);
- uint8_t this_p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane);
-
- if (this_v > v)
- v = this_v;
- if (this_p > p)
- p = this_p;
- }
-
- voltage_max = intel_dp_voltage_max(intel_dp);
- if (v >= voltage_max)
- v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
-
- preemph_max = intel_dp_pre_emphasis_max(intel_dp, v);
- if (p >= preemph_max)
- p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
-
- for (lane = 0; lane < 4; lane++)
- intel_dp->train_set[lane] = v | p;
-}
-
static uint32_t
gen4_signal_levels(uint8_t train_set)
{
}
}
-/* Properly updates "DP" with the correct signal levels. */
-static void
-intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
+void
+intel_dp_set_signal_levels(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum port port = intel_dig_port->port;
struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
uint32_t signal_levels, mask = 0;
uint8_t train_set = intel_dp->train_set[0];
(train_set & DP_TRAIN_PRE_EMPHASIS_MASK) >>
DP_TRAIN_PRE_EMPHASIS_SHIFT);
- *DP = (*DP & ~mask) | signal_levels;
-}
-
-static bool
-intel_dp_set_link_train(struct intel_dp *intel_dp,
- uint32_t *DP,
- uint8_t dp_train_pat)
-{
- struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_i915_private *dev_priv =
- to_i915(intel_dig_port->base.base.dev);
- uint8_t buf[sizeof(intel_dp->train_set) + 1];
- int ret, len;
-
- _intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
+ intel_dp->DP = (intel_dp->DP & ~mask) | signal_levels;
- I915_WRITE(intel_dp->output_reg, *DP);
+ I915_WRITE(intel_dp->output_reg, intel_dp->DP);
POSTING_READ(intel_dp->output_reg);
-
- buf[0] = dp_train_pat;
- if ((dp_train_pat & DP_TRAINING_PATTERN_MASK) ==
- DP_TRAINING_PATTERN_DISABLE) {
- /* don't write DP_TRAINING_LANEx_SET on disable */
- len = 1;
- } else {
- /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */
- memcpy(buf + 1, intel_dp->train_set, intel_dp->lane_count);
- len = intel_dp->lane_count + 1;
- }
-
- ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_PATTERN_SET,
- buf, len);
-
- return ret == len;
}
-static bool
-intel_dp_reset_link_train(struct intel_dp *intel_dp, uint32_t *DP,
- uint8_t dp_train_pat)
-{
- if (!intel_dp->train_set_valid)
- memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
- intel_dp_set_signal_levels(intel_dp, DP);
- return intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
-}
-
-static bool
-intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP,
- const uint8_t link_status[DP_LINK_STATUS_SIZE])
+void
+intel_dp_program_link_training_pattern(struct intel_dp *intel_dp,
+ uint8_t dp_train_pat)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv =
to_i915(intel_dig_port->base.base.dev);
- int ret;
- intel_get_adjust_train(intel_dp, link_status);
- intel_dp_set_signal_levels(intel_dp, DP);
+ _intel_dp_set_link_train(intel_dp, &intel_dp->DP, dp_train_pat);
- I915_WRITE(intel_dp->output_reg, *DP);
+ I915_WRITE(intel_dp->output_reg, intel_dp->DP);
POSTING_READ(intel_dp->output_reg);
-
- ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
- intel_dp->train_set, intel_dp->lane_count);
-
- return ret == intel_dp->lane_count;
}
-static void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
+void intel_dp_set_idle_link_train(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
DRM_ERROR("Timed out waiting for DP idle patterns\n");
}
-/* Enable corresponding port and start training pattern 1 */
-static void
-intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
-{
- struct drm_encoder *encoder = &dp_to_dig_port(intel_dp)->base.base;
- struct drm_device *dev = encoder->dev;
- int i;
- uint8_t voltage;
- int voltage_tries, loop_tries;
- uint32_t DP = intel_dp->DP;
- uint8_t link_config[2];
- uint8_t link_bw, rate_select;
-
- if (HAS_DDI(dev))
- intel_ddi_prepare_link_retrain(encoder);
-
- intel_dp_compute_rate(intel_dp, intel_dp->link_rate,
- &link_bw, &rate_select);
-
- /* Write the link configuration data */
- link_config[0] = link_bw;
- link_config[1] = intel_dp->lane_count;
- if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
- link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
- drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
- if (intel_dp->num_sink_rates)
- drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
- &rate_select, 1);
-
- link_config[0] = 0;
- link_config[1] = DP_SET_ANSI_8B10B;
- drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
-
- DP |= DP_PORT_EN;
-
- /* clock recovery */
- if (!intel_dp_reset_link_train(intel_dp, &DP,
- DP_TRAINING_PATTERN_1 |
- DP_LINK_SCRAMBLING_DISABLE)) {
- DRM_ERROR("failed to enable link training\n");
- return;
- }
-
- voltage = 0xff;
- voltage_tries = 0;
- loop_tries = 0;
- for (;;) {
- uint8_t link_status[DP_LINK_STATUS_SIZE];
-
- drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
- if (!intel_dp_get_link_status(intel_dp, link_status)) {
- DRM_ERROR("failed to get link status\n");
- break;
- }
-
- if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
- DRM_DEBUG_KMS("clock recovery OK\n");
- break;
- }
-
- /*
- * if we used previously trained voltage and pre-emphasis values
- * and we don't get clock recovery, reset link training values
- */
- if (intel_dp->train_set_valid) {
- DRM_DEBUG_KMS("clock recovery not ok, reset");
- /* clear the flag as we are not reusing train set */
- intel_dp->train_set_valid = false;
- if (!intel_dp_reset_link_train(intel_dp, &DP,
- DP_TRAINING_PATTERN_1 |
- DP_LINK_SCRAMBLING_DISABLE)) {
- DRM_ERROR("failed to enable link training\n");
- return;
- }
- continue;
- }
-
- /* Check to see if we've tried the max voltage */
- for (i = 0; i < intel_dp->lane_count; i++)
- if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
- break;
- if (i == intel_dp->lane_count) {
- ++loop_tries;
- if (loop_tries == 5) {
- DRM_ERROR("too many full retries, give up\n");
- break;
- }
- intel_dp_reset_link_train(intel_dp, &DP,
- DP_TRAINING_PATTERN_1 |
- DP_LINK_SCRAMBLING_DISABLE);
- voltage_tries = 0;
- continue;
- }
-
- /* Check to see if we've tried the same voltage 5 times */
- if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
- ++voltage_tries;
- if (voltage_tries == 5) {
- DRM_ERROR("too many voltage retries, give up\n");
- break;
- }
- } else
- voltage_tries = 0;
- voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
-
- /* Update training set as requested by target */
- if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) {
- DRM_ERROR("failed to update link training\n");
- break;
- }
- }
-
- intel_dp->DP = DP;
-}
-
-static void
-intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
-{
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = dig_port->base.base.dev;
- bool channel_eq = false;
- int tries, cr_tries;
- uint32_t DP = intel_dp->DP;
- uint32_t training_pattern = DP_TRAINING_PATTERN_2;
-
- /*
- * Training Pattern 3 for HBR2 or 1.2 devices that support it.
- *
- * Intel platforms that support HBR2 also support TPS3. TPS3 support is
- * also mandatory for downstream devices that support HBR2.
- *
- * Due to WaDisableHBR2 SKL < B0 is the only exception where TPS3 is
- * supported but still not enabled.
- */
- if (intel_dp_source_supports_hbr2(dev) &&
- drm_dp_tps3_supported(intel_dp->dpcd))
- training_pattern = DP_TRAINING_PATTERN_3;
- else if (intel_dp->link_rate == 540000)
- DRM_ERROR("5.4 Gbps link rate without HBR2/TPS3 support\n");
-
- /* channel equalization */
- if (!intel_dp_set_link_train(intel_dp, &DP,
- training_pattern |
- DP_LINK_SCRAMBLING_DISABLE)) {
- DRM_ERROR("failed to start channel equalization\n");
- return;
- }
-
- tries = 0;
- cr_tries = 0;
- channel_eq = false;
- for (;;) {
- uint8_t link_status[DP_LINK_STATUS_SIZE];
-
- if (cr_tries > 5) {
- DRM_ERROR("failed to train DP, aborting\n");
- break;
- }
-
- drm_dp_link_train_channel_eq_delay(intel_dp->dpcd);
- if (!intel_dp_get_link_status(intel_dp, link_status)) {
- DRM_ERROR("failed to get link status\n");
- break;
- }
-
- /* Make sure clock is still ok */
- if (!drm_dp_clock_recovery_ok(link_status,
- intel_dp->lane_count)) {
- intel_dp->train_set_valid = false;
- intel_dp_link_training_clock_recovery(intel_dp);
- intel_dp_set_link_train(intel_dp, &DP,
- training_pattern |
- DP_LINK_SCRAMBLING_DISABLE);
- cr_tries++;
- continue;
- }
-
- if (drm_dp_channel_eq_ok(link_status,
- intel_dp->lane_count)) {
- channel_eq = true;
- break;
- }
-
- /* Try 5 times, then try clock recovery if that fails */
- if (tries > 5) {
- intel_dp->train_set_valid = false;
- intel_dp_link_training_clock_recovery(intel_dp);
- intel_dp_set_link_train(intel_dp, &DP,
- training_pattern |
- DP_LINK_SCRAMBLING_DISABLE);
- tries = 0;
- cr_tries++;
- continue;
- }
-
- /* Update training set as requested by target */
- if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) {
- DRM_ERROR("failed to update link training\n");
- break;
- }
- ++tries;
- }
-
- intel_dp_set_idle_link_train(intel_dp);
-
- intel_dp->DP = DP;
-
- if (channel_eq) {
- intel_dp->train_set_valid = true;
- DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
- }
-}
-
-void intel_dp_stop_link_train(struct intel_dp *intel_dp)
-{
- intel_dp_set_link_train(intel_dp, &intel_dp->DP,
- DP_TRAINING_PATTERN_DISABLE);
-}
-
-void
-intel_dp_start_link_train(struct intel_dp *intel_dp)
-{
- intel_dp_link_training_clock_recovery(intel_dp);
- intel_dp_link_training_channel_equalization(intel_dp);
-}
-
static void
intel_dp_link_down(struct intel_dp *intel_dp)
{
* matching HDMI port to be enabled on transcoder A.
*/
if (HAS_PCH_IBX(dev) && crtc->pipe == PIPE_B && port != PORT_A) {
+ /*
+ * We get CPU/PCH FIFO underruns on the other pipe when
+ * doing the workaround. Sweep them under the rug.
+ */
+ intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, false);
+ intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
+
/* always enable with pattern 1 (as per spec) */
DP &= ~(DP_PIPEB_SELECT | DP_LINK_TRAIN_MASK);
DP |= DP_PORT_EN | DP_LINK_TRAIN_PAT_1;
DP &= ~DP_PORT_EN;
I915_WRITE(intel_dp->output_reg, DP);
POSTING_READ(intel_dp->output_reg);
+
+ intel_wait_for_vblank_if_active(dev_priv->dev, PIPE_A);
+ intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, true);
+ intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
}
msleep(intel_dp->panel_power_down_delay);
+
+ intel_dp->DP = DP;
}
static bool
}
DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
- yesno(intel_dp_source_supports_hbr2(dev)),
+ yesno(intel_dp_source_supports_hbr2(intel_dp)),
yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
/* Intermediate frequency support */
static int intel_dp_sink_crc_stop(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc);
u8 buf;
int ret = 0;
+ int count = 0;
+ int attempts = 10;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) {
DRM_DEBUG_KMS("Sink CRC couldn't be stopped properly\n");
goto out;
}
- intel_dp->sink_crc.started = false;
+ do {
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+ if (drm_dp_dpcd_readb(&intel_dp->aux,
+ DP_TEST_SINK_MISC, &buf) < 0) {
+ ret = -EIO;
+ goto out;
+ }
+ count = buf & DP_TEST_COUNT_MASK;
+ } while (--attempts && count);
+
+ if (attempts == 0) {
+ DRM_ERROR("TIMEOUT: Sink CRC counter is not zeroed\n");
+ ret = -ETIMEDOUT;
+ }
+
out:
hsw_enable_ips(intel_crtc);
return ret;
static int intel_dp_sink_crc_start(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
struct intel_crtc *intel_crtc = to_intel_crtc(dig_port->base.base.crtc);
u8 buf;
int ret;
- if (intel_dp->sink_crc.started) {
- ret = intel_dp_sink_crc_stop(intel_dp);
- if (ret)
- return ret;
- }
-
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
return -EIO;
if (!(buf & DP_TEST_CRC_SUPPORTED))
return -ENOTTY;
- intel_dp->sink_crc.last_count = buf & DP_TEST_COUNT_MASK;
-
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
return -EIO;
+ if (buf & DP_TEST_SINK_START) {
+ ret = intel_dp_sink_crc_stop(intel_dp);
+ if (ret)
+ return ret;
+ }
+
hsw_disable_ips(intel_crtc);
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
return -EIO;
}
- intel_dp->sink_crc.started = true;
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
return 0;
}
u8 buf;
int count, ret;
int attempts = 6;
- bool old_equal_new;
ret = intel_dp_sink_crc_start(intel_dp);
if (ret)
}
count = buf & DP_TEST_COUNT_MASK;
- /*
- * Count might be reset during the loop. In this case
- * last known count needs to be reset as well.
- */
- if (count == 0)
- intel_dp->sink_crc.last_count = 0;
-
- if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0) {
- ret = -EIO;
- goto stop;
- }
-
- old_equal_new = (count == intel_dp->sink_crc.last_count &&
- !memcmp(intel_dp->sink_crc.last_crc, crc,
- 6 * sizeof(u8)));
-
- } while (--attempts && (count == 0 || old_equal_new));
-
- intel_dp->sink_crc.last_count = buf & DP_TEST_COUNT_MASK;
- memcpy(intel_dp->sink_crc.last_crc, crc, 6 * sizeof(u8));
+ } while (--attempts && count == 0);
if (attempts == 0) {
- if (old_equal_new) {
- DRM_DEBUG_KMS("Unreliable Sink CRC counter: Current returned CRC is identical to the previous one\n");
- } else {
- DRM_ERROR("Panel is unable to calculate any CRC after 6 vblanks\n");
- ret = -ETIMEDOUT;
- goto stop;
- }
+ DRM_ERROR("Panel is unable to calculate any CRC after 6 vblanks\n");
+ ret = -ETIMEDOUT;
+ goto stop;
+ }
+
+ if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0) {
+ ret = -EIO;
+ goto stop;
}
stop:
uint8_t rxdata = 0;
int status = 0;
- intel_dp->compliance_test_active = 0;
- intel_dp->compliance_test_type = 0;
- intel_dp->compliance_test_data = 0;
-
- intel_dp->aux.i2c_nack_count = 0;
- intel_dp->aux.i2c_defer_count = 0;
-
status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_REQUEST, &rxdata, 1);
if (status <= 0) {
DRM_DEBUG_KMS("Could not read test request from sink\n");
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
+ /*
+ * Clearing compliance test variables to allow capturing
+ * of values for next automated test request.
+ */
+ intel_dp->compliance_test_active = 0;
+ intel_dp->compliance_test_type = 0;
+ intel_dp->compliance_test_data = 0;
+
if (!intel_encoder->base.crtc)
return;
DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
}
- if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
+ /* if link training is requested we should perform it always */
+ if ((intel_dp->compliance_test_type == DP_TEST_LINK_TRAINING) ||
+ (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))) {
DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
intel_encoder->base.name);
intel_dp_start_link_train(intel_dp);
return g4x_digital_port_connected(dev_priv, port);
}
-static enum drm_connector_status
-ironlake_dp_detect(struct intel_dp *intel_dp)
-{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-
- if (!intel_digital_port_connected(dev_priv, intel_dig_port))
- return connector_status_disconnected;
-
- return intel_dp_detect_dpcd(intel_dp);
-}
-
-static enum drm_connector_status
-g4x_dp_detect(struct intel_dp *intel_dp)
-{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
- struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-
- /* Can't disconnect eDP, but you can close the lid... */
- if (is_edp(intel_dp)) {
- enum drm_connector_status status;
-
- status = intel_panel_detect(dev);
- if (status == connector_status_unknown)
- status = connector_status_connected;
- return status;
- }
-
- if (!intel_digital_port_connected(dev->dev_private, intel_dig_port))
- return connector_status_disconnected;
-
- return intel_dp_detect_dpcd(intel_dp);
-}
-
static struct edid *
intel_dp_get_edid(struct intel_dp *intel_dp)
{
intel_dp->has_audio = false;
}
-static enum intel_display_power_domain
-intel_dp_power_get(struct intel_dp *dp)
-{
- struct intel_encoder *encoder = &dp_to_dig_port(dp)->base;
- enum intel_display_power_domain power_domain;
-
- power_domain = intel_display_port_power_domain(encoder);
- intel_display_power_get(to_i915(encoder->base.dev), power_domain);
-
- return power_domain;
-}
-
-static void
-intel_dp_power_put(struct intel_dp *dp,
- enum intel_display_power_domain power_domain)
-{
- struct intel_encoder *encoder = &dp_to_dig_port(dp)->base;
- intel_display_power_put(to_i915(encoder->base.dev), power_domain);
-}
-
static enum drm_connector_status
intel_dp_detect(struct drm_connector *connector, bool force)
{
return connector_status_disconnected;
}
- power_domain = intel_dp_power_get(intel_dp);
+ power_domain = intel_display_port_aux_power_domain(intel_encoder);
+ intel_display_power_get(to_i915(dev), power_domain);
/* Can't disconnect eDP, but you can close the lid... */
if (is_edp(intel_dp))
status = edp_detect(intel_dp);
- else if (HAS_PCH_SPLIT(dev))
- status = ironlake_dp_detect(intel_dp);
+ else if (intel_digital_port_connected(to_i915(dev),
+ dp_to_dig_port(intel_dp)))
+ status = intel_dp_detect_dpcd(intel_dp);
else
- status = g4x_dp_detect(intel_dp);
- if (status != connector_status_connected)
+ status = connector_status_disconnected;
+
+ if (status != connector_status_connected) {
+ intel_dp->compliance_test_active = 0;
+ intel_dp->compliance_test_type = 0;
+ intel_dp->compliance_test_data = 0;
+
goto out;
+ }
intel_dp_probe_oui(intel_dp);
goto out;
}
+ /*
+ * Clearing NACK and defer counts to get their exact values
+ * while reading EDID which are required by Compliance tests
+ * 4.2.2.4 and 4.2.2.5
+ */
+ intel_dp->aux.i2c_nack_count = 0;
+ intel_dp->aux.i2c_defer_count = 0;
+
intel_dp_set_edid(intel_dp);
if (intel_encoder->type != INTEL_OUTPUT_EDP)
}
out:
- intel_dp_power_put(intel_dp, power_domain);
+ intel_display_power_put(to_i915(dev), power_domain);
return status;
}
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
+ struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
enum intel_display_power_domain power_domain;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
if (connector->status != connector_status_connected)
return;
- power_domain = intel_dp_power_get(intel_dp);
+ power_domain = intel_display_port_aux_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
intel_dp_set_edid(intel_dp);
- intel_dp_power_put(intel_dp, power_domain);
+ intel_display_power_put(dev_priv, power_domain);
if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
struct intel_dp *intel_dp = &intel_dig_port->dp;
- drm_dp_aux_unregister(&intel_dp->aux);
+ intel_dp_aux_fini(intel_dp);
intel_dp_mst_encoder_cleanup(intel_dig_port);
if (is_edp(intel_dp)) {
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
* indefinitely.
*/
DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n");
- power_domain = intel_display_port_power_domain(&intel_dig_port->base);
+ power_domain = intel_display_port_aux_power_domain(&intel_dig_port->base);
intel_display_power_get(dev_priv, power_domain);
edp_panel_vdd_schedule_off(intel_dp);
enum intel_display_power_domain power_domain;
enum irqreturn ret = IRQ_NONE;
- if (intel_dig_port->base.type != INTEL_OUTPUT_EDP)
+ if (intel_dig_port->base.type != INTEL_OUTPUT_EDP &&
+ intel_dig_port->base.type != INTEL_OUTPUT_HDMI)
intel_dig_port->base.type = INTEL_OUTPUT_DISPLAYPORT;
if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
port_name(intel_dig_port->port),
long_hpd ? "long" : "short");
- power_domain = intel_display_port_power_domain(intel_encoder);
+ power_domain = intel_display_port_aux_power_domain(intel_encoder);
intel_display_power_get(dev_priv, power_domain);
if (long_hpd) {
return ret;
}
-/* Return which DP Port should be selected for Transcoder DP control */
-int
-intel_trans_dp_port_sel(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct intel_encoder *intel_encoder;
- struct intel_dp *intel_dp;
-
- for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
- intel_dp = enc_to_intel_dp(&intel_encoder->base);
-
- if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
- intel_encoder->type == INTEL_OUTPUT_EDP)
- return intel_dp->output_reg;
- }
-
- return -1;
-}
-
/* check the VBT to see whether the eDP is on another port */
bool intel_dp_is_edp(struct drm_device *dev, enum port port)
{
struct edp_power_seq cur, vbt, spec,
*final = &intel_dp->pps_delays;
u32 pp_on, pp_off, pp_div = 0, pp_ctl = 0;
- int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg = 0;
+ i915_reg_t pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
lockdep_assert_held(&dev_priv->pps_mutex);
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp_on, pp_off, pp_div, port_sel = 0;
int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
- int pp_on_reg, pp_off_reg, pp_div_reg = 0, pp_ctrl_reg;
+ i915_reg_t pp_on_reg, pp_off_reg, pp_div_reg, pp_ctrl_reg;
enum port port = dp_to_dig_port(intel_dp)->port;
const struct edp_power_seq *seq = &intel_dp->pps_delays;
DRM_ERROR("Unsupported refreshrate type\n");
}
} else if (INTEL_INFO(dev)->gen > 6) {
- u32 reg = PIPECONF(intel_crtc->config->cpu_transcoder);
+ i915_reg_t reg = PIPECONF(intel_crtc->config->cpu_transcoder);
u32 val;
val = I915_READ(reg);
struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_dig_port->port;
- int type;
+ int type, ret;
intel_dp->pps_pipe = INVALID_PIPE;
else
intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl;
+ if (HAS_DDI(dev))
+ intel_dp->prepare_link_retrain = intel_ddi_prepare_link_retrain;
+
/* Preserve the current hw state. */
intel_dp->DP = I915_READ(intel_dp->output_reg);
intel_dp->attached_connector = intel_connector;
break;
case PORT_B:
intel_encoder->hpd_pin = HPD_PORT_B;
- if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
+ if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
intel_encoder->hpd_pin = HPD_PORT_A;
break;
case PORT_C:
pps_unlock(intel_dp);
}
- intel_dp_aux_init(intel_dp, intel_connector);
+ ret = intel_dp_aux_init(intel_dp, intel_connector);
+ if (ret)
+ goto fail;
/* init MST on ports that can support it */
if (HAS_DP_MST(dev) &&
intel_connector->base.base.id);
if (!intel_edp_init_connector(intel_dp, intel_connector)) {
- drm_dp_aux_unregister(&intel_dp->aux);
- if (is_edp(intel_dp)) {
- cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
- /*
- * vdd might still be enabled do to the delayed vdd off.
- * Make sure vdd is actually turned off here.
- */
- pps_lock(intel_dp);
- edp_panel_vdd_off_sync(intel_dp);
- pps_unlock(intel_dp);
- }
- drm_connector_unregister(connector);
- drm_connector_cleanup(connector);
- return false;
+ intel_dp_aux_fini(intel_dp);
+ intel_dp_mst_encoder_cleanup(intel_dig_port);
+ goto fail;
}
intel_dp_add_properties(intel_dp, connector);
i915_debugfs_connector_add(connector);
return true;
+
+fail:
+ if (is_edp(intel_dp)) {
+ cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
+ /*
+ * vdd might still be enabled do to the delayed vdd off.
+ * Make sure vdd is actually turned off here.
+ */
+ pps_lock(intel_dp);
+ edp_panel_vdd_off_sync(intel_dp);
+ pps_unlock(intel_dp);
+ }
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+
+ return false;
}
void
-intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
+intel_dp_init(struct drm_device *dev,
+ i915_reg_t output_reg, enum port port)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port;
encoder = &intel_encoder->base;
drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
- DRM_MODE_ENCODER_TMDS);
+ DRM_MODE_ENCODER_TMDS, NULL);
intel_encoder->compute_config = intel_dp_compute_config;
intel_encoder->disable = intel_disable_dp;
projects / mirror_ubuntu-jammy-kernel.git / blobdiff