#define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c
#define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00
#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04
+#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP_V6 0x08 //for V6, the correct defintion for 36bpp should be 2 for 36bpp(2:1)
#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08
+#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP_V6 0x04 //for V6, the correct defintion for 30bpp should be 1 for 36bpp(5:4)
#define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c
#define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10
#define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK 0x40
USHORT usVoltageLevel; // real voltage level
}SET_VOLTAGE_PARAMETERS_V2;
-
+// used by both SetVoltageTable v1.3 and v1.4
typedef struct _SET_VOLTAGE_PARAMETERS_V1_3
{
UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
#define ATOM_GET_VOLTAGE_VID 0x00
#define ATOM_GET_VOTLAGE_INIT_SEQ 0x03
#define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID 0x04
-// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state
-#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10
+#define ATOM_GET_VOLTAGE_SVID2 0x07 //Get SVI2 Regulator Info
+// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state
+#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10
// for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state
#define ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11
-// undefined power state
+
#define ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12
#define ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13
+// New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure
+typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2
+{
+ UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+ UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info
+ USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
+ ULONG ulSCLKFreq; // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table
+}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2;
+
+// New in GetVoltageInfo v1.2 ucVoltageMode
+#define ATOM_GET_VOLTAGE_EVV_VOLTAGE 0x09
+
+// New Added from CI Hawaii for EVV feature
+typedef struct _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2
+{
+ USHORT usVoltageLevel; // real voltage level in unit of mv
+ USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator
+ ULONG ulReseved;
+}GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2;
+
/****************************************************************************/
// Structures used by TVEncoderControlTable
/****************************************************************************/
#define PP_AC_DC_SWITCH_GPIO_PINID 60
//from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable
#define VDDC_VRHOT_GPIO_PINID 61
+//if ucGPIO_ID=VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled
+#define VDDC_PCC_GPIO_PINID 62
typedef struct _ATOM_GPIO_PIN_LUT
{
#define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record
#define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19
#define ATOM_ENCODER_CAP_RECORD_TYPE 20
-
+#define ATOM_BRACKET_LAYOUT_RECORD_TYPE 21
//Must be updated when new record type is added,equal to that record definition!
-#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_ENCODER_CAP_RECORD_TYPE
+#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_BRACKET_LAYOUT_RECORD_TYPE
typedef struct _ATOM_I2C_RECORD
{
USHORT usReserved;
}ATOM_CONNECTOR_REMOTE_CAP_RECORD;
+typedef struct _ATOM_CONNECTOR_LAYOUT_INFO
+{
+ USHORT usConnectorObjectId;
+ UCHAR ucConnectorType;
+ UCHAR ucPosition;
+}ATOM_CONNECTOR_LAYOUT_INFO;
+
+// define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size
+#define CONNECTOR_TYPE_DVI_D 1
+#define CONNECTOR_TYPE_DVI_I 2
+#define CONNECTOR_TYPE_VGA 3
+#define CONNECTOR_TYPE_HDMI 4
+#define CONNECTOR_TYPE_DISPLAY_PORT 5
+#define CONNECTOR_TYPE_MINI_DISPLAY_PORT 6
+
+typedef struct _ATOM_BRACKET_LAYOUT_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ UCHAR ucLength;
+ UCHAR ucWidth;
+ UCHAR ucConnNum;
+ UCHAR ucReserved;
+ ATOM_CONNECTOR_LAYOUT_INFO asConnInfo[1];
+}ATOM_BRACKET_LAYOUT_RECORD;
+
/****************************************************************************/
// ASIC voltage data table
/****************************************************************************/
#define VOLTAGE_OBJ_VR_I2C_INIT_SEQ 3 //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3
#define VOLTAGE_OBJ_PHASE_LUT 4 //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3
#define VOLTAGE_OBJ_SVID2 7 //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3
-#define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
-#define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_EVV 8
+#define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+#define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
#define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT 0x12 //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
typedef struct _VOLTAGE_LUT_ENTRY_V2
VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff
}ATOM_I2C_VOLTAGE_OBJECT_V3;
+// ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag
+#define VOLTAGE_DATA_ONE_BYTE 0
+#define VOLTAGE_DATA_TWO_BYTE 1
+
typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3
{
ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT
// 1:0 \96 offset trim,
USHORT usLoadLine_PSI;
// GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31
- UCHAR ucReserved[2];
+ UCHAR ucSVDGpioId; //0~31 indicate GPIO0~31
+ UCHAR ucSVCGpioId; //0~31 indicate GPIO0~31
ULONG ulReserved;
}ATOM_SVID2_VOLTAGE_OBJECT_V3;
USHORT usElbVDDCI_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array
}ATOM_ASIC_PROFILING_INFO_V2_1;
+typedef struct _ATOM_ASIC_PROFILING_INFO_V3_1
+{
+ ATOM_COMMON_TABLE_HEADER asHeader;
+ ULONG ulEvvDerateTdp;
+ ULONG ulEvvDerateTdc;
+ ULONG ulBoardCoreTemp;
+ ULONG ulMaxVddc;
+ ULONG ulMinVddc;
+ ULONG ulLoadLineSlop;
+ ULONG ulLeakageTemp;
+ ULONG ulLeakageVoltage;
+ ULONG ulCACmEncodeRange;
+ ULONG ulCACmEncodeAverage;
+ ULONG ulCACbEncodeRange;
+ ULONG ulCACbEncodeAverage;
+ ULONG ulKt_bEncodeRange;
+ ULONG ulKt_bEncodeAverage;
+ ULONG ulKv_mEncodeRange;
+ ULONG ulKv_mEncodeAverage;
+ ULONG ulKv_bEncodeRange;
+ ULONG ulKv_bEncodeAverage;
+ ULONG ulLkgEncodeLn_MaxDivMin;
+ ULONG ulLkgEncodeMin;
+ ULONG ulEfuseLogisticAlpha;
+ USHORT usPowerDpm0;
+ USHORT usCurrentDpm0;
+ USHORT usPowerDpm1;
+ USHORT usCurrentDpm1;
+ USHORT usPowerDpm2;
+ USHORT usCurrentDpm2;
+ USHORT usPowerDpm3;
+ USHORT usCurrentDpm3;
+ USHORT usPowerDpm4;
+ USHORT usCurrentDpm4;
+ USHORT usPowerDpm5;
+ USHORT usCurrentDpm5;
+ USHORT usPowerDpm6;
+ USHORT usCurrentDpm6;
+ USHORT usPowerDpm7;
+ USHORT usCurrentDpm7;
+}ATOM_ASIC_PROFILING_INFO_V3_1;
+
+
typedef struct _ATOM_POWER_SOURCE_OBJECT
{
UCHAR ucPwrSrcId; // Power source
#define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C
#define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0
#define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01
+#define ATOM_S7_ASIC_INIT_COMPLETEb1 0x02
+#define ATOM_S7_ASIC_INIT_COMPLETE_MASK 0x00000200
#define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF
#define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8
#define _128Mx32 0x53
#define _256Mx8 0x61
#define _256Mx16 0x62
+#define _512Mx8 0x71
#define SAMSUNG 0x1
#define INFINEON 0x2
UCHAR ucMaxDispEngineNum;
UCHAR ucMaxActiveDispEngineNum;
UCHAR ucMaxPPLLNum;
- UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE
- UCHAR ucReserved[3];
- ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only
+ UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE
+ UCHAR ucDispCaps;
+ UCHAR ucReserved[2];
+ ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only
}ATOM_DISP_OUT_INFO_V3;
//ucDispCaps
typedef struct {
AMD_ACPI_DESCRIPTION_HEADER SHeader;
UCHAR TableUUID[16]; //0x24
- ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
- ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
+ ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the structure.
+ ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the structure.
ULONG Reserved[4]; //0x3C
}UEFI_ACPI_VFCT;
projects / mirror_ubuntu-focal-kernel.git / blobdiff