#include "drm_fb_cma_helper.h"
#include "drm_plane_helper.h"
+enum vc4_scaling_mode {
+ VC4_SCALING_NONE,
+ VC4_SCALING_TPZ,
+ VC4_SCALING_PPF,
+};
+
struct vc4_plane_state {
struct drm_plane_state base;
+ /* System memory copy of the display list for this element, computed
+ * at atomic_check time.
+ */
u32 *dlist;
- u32 dlist_size; /* Number of dwords in allocated for the display list */
+ u32 dlist_size; /* Number of dwords allocated for the display list */
u32 dlist_count; /* Number of used dwords in the display list. */
- /* Offset in the dlist to pointer word 0. */
- u32 pw0_offset;
+ /* Offset in the dlist to various words, for pageflip or
+ * cursor updates.
+ */
+ u32 pos0_offset;
+ u32 pos2_offset;
+ u32 ptr0_offset;
/* Offset where the plane's dlist was last stored in the
- hardware at vc4_crtc_atomic_flush() time.
- */
- u32 *hw_dlist;
+ * hardware at vc4_crtc_atomic_flush() time.
+ */
+ u32 __iomem *hw_dlist;
+
+ /* Clipped coordinates of the plane on the display. */
+ int crtc_x, crtc_y, crtc_w, crtc_h;
+ /* Clipped area being scanned from in the FB. */
+ u32 src_x, src_y;
+
+ u32 src_w[2], src_h[2];
+
+ /* Scaling selection for the RGB/Y plane and the Cb/Cr planes. */
+ enum vc4_scaling_mode x_scaling[2], y_scaling[2];
+ bool is_unity;
+ bool is_yuv;
+
+ /* Offset to start scanning out from the start of the plane's
+ * BO.
+ */
+ u32 offsets[3];
+
+ /* Our allocation in LBM for temporary storage during scaling. */
+ struct drm_mm_node lbm;
};
static inline struct vc4_plane_state *
u32 hvs; /* HVS_FORMAT_* */
u32 pixel_order;
bool has_alpha;
+ bool flip_cbcr;
} hvs_formats[] = {
{
.drm = DRM_FORMAT_XRGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
.drm = DRM_FORMAT_ARGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
.pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
},
+ {
+ .drm = DRM_FORMAT_RGB565, .hvs = HVS_PIXEL_FORMAT_RGB565,
+ .pixel_order = HVS_PIXEL_ORDER_XRGB, .has_alpha = false,
+ },
+ {
+ .drm = DRM_FORMAT_BGR565, .hvs = HVS_PIXEL_FORMAT_RGB565,
+ .pixel_order = HVS_PIXEL_ORDER_XBGR, .has_alpha = false,
+ },
+ {
+ .drm = DRM_FORMAT_ARGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
+ .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
+ },
+ {
+ .drm = DRM_FORMAT_XRGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
+ .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
+ },
+ {
+ .drm = DRM_FORMAT_YUV422,
+ .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
+ },
+ {
+ .drm = DRM_FORMAT_YVU422,
+ .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
+ .flip_cbcr = true,
+ },
+ {
+ .drm = DRM_FORMAT_YUV420,
+ .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
+ },
+ {
+ .drm = DRM_FORMAT_YVU420,
+ .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
+ .flip_cbcr = true,
+ },
+ {
+ .drm = DRM_FORMAT_NV12,
+ .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE,
+ },
+ {
+ .drm = DRM_FORMAT_NV16,
+ .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE,
+ },
};
static const struct hvs_format *vc4_get_hvs_format(u32 drm_format)
return NULL;
}
+static enum vc4_scaling_mode vc4_get_scaling_mode(u32 src, u32 dst)
+{
+ if (dst > src)
+ return VC4_SCALING_PPF;
+ else if (dst < src)
+ return VC4_SCALING_TPZ;
+ else
+ return VC4_SCALING_NONE;
+}
+
static bool plane_enabled(struct drm_plane_state *state)
{
return state->fb && state->crtc;
if (!vc4_state)
return NULL;
+ memset(&vc4_state->lbm, 0, sizeof(vc4_state->lbm));
+
__drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base);
if (vc4_state->dlist) {
static void vc4_plane_destroy_state(struct drm_plane *plane,
struct drm_plane_state *state)
{
+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+ if (vc4_state->lbm.allocated) {
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
+ drm_mm_remove_node(&vc4_state->lbm);
+ spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
+ }
+
kfree(vc4_state->dlist);
__drm_atomic_helper_plane_destroy_state(plane, &vc4_state->base);
kfree(state);
vc4_state->dlist[vc4_state->dlist_count++] = val;
}
+/* Returns the scl0/scl1 field based on whether the dimensions need to
+ * be up/down/non-scaled.
+ *
+ * This is a replication of a table from the spec.
+ */
+static u32 vc4_get_scl_field(struct drm_plane_state *state, int plane)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+ switch (vc4_state->x_scaling[plane] << 2 | vc4_state->y_scaling[plane]) {
+ case VC4_SCALING_PPF << 2 | VC4_SCALING_PPF:
+ return SCALER_CTL0_SCL_H_PPF_V_PPF;
+ case VC4_SCALING_TPZ << 2 | VC4_SCALING_PPF:
+ return SCALER_CTL0_SCL_H_TPZ_V_PPF;
+ case VC4_SCALING_PPF << 2 | VC4_SCALING_TPZ:
+ return SCALER_CTL0_SCL_H_PPF_V_TPZ;
+ case VC4_SCALING_TPZ << 2 | VC4_SCALING_TPZ:
+ return SCALER_CTL0_SCL_H_TPZ_V_TPZ;
+ case VC4_SCALING_PPF << 2 | VC4_SCALING_NONE:
+ return SCALER_CTL0_SCL_H_PPF_V_NONE;
+ case VC4_SCALING_NONE << 2 | VC4_SCALING_PPF:
+ return SCALER_CTL0_SCL_H_NONE_V_PPF;
+ case VC4_SCALING_NONE << 2 | VC4_SCALING_TPZ:
+ return SCALER_CTL0_SCL_H_NONE_V_TPZ;
+ case VC4_SCALING_TPZ << 2 | VC4_SCALING_NONE:
+ return SCALER_CTL0_SCL_H_TPZ_V_NONE;
+ default:
+ case VC4_SCALING_NONE << 2 | VC4_SCALING_NONE:
+ /* The unity case is independently handled by
+ * SCALER_CTL0_UNITY.
+ */
+ return 0;
+ }
+}
+
+static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
+{
+ struct drm_plane *plane = state->plane;
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+ struct drm_framebuffer *fb = state->fb;
+ struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
+ u32 subpixel_src_mask = (1 << 16) - 1;
+ u32 format = fb->pixel_format;
+ int num_planes = drm_format_num_planes(format);
+ u32 h_subsample = 1;
+ u32 v_subsample = 1;
+ int i;
+
+ for (i = 0; i < num_planes; i++)
+ vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
+
+ /* We don't support subpixel source positioning for scaling. */
+ if ((state->src_x & subpixel_src_mask) ||
+ (state->src_y & subpixel_src_mask) ||
+ (state->src_w & subpixel_src_mask) ||
+ (state->src_h & subpixel_src_mask)) {
+ return -EINVAL;
+ }
+
+ vc4_state->src_x = state->src_x >> 16;
+ vc4_state->src_y = state->src_y >> 16;
+ vc4_state->src_w[0] = state->src_w >> 16;
+ vc4_state->src_h[0] = state->src_h >> 16;
+
+ vc4_state->crtc_x = state->crtc_x;
+ vc4_state->crtc_y = state->crtc_y;
+ vc4_state->crtc_w = state->crtc_w;
+ vc4_state->crtc_h = state->crtc_h;
+
+ vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
+ vc4_state->crtc_w);
+ vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
+ vc4_state->crtc_h);
+
+ if (num_planes > 1) {
+ vc4_state->is_yuv = true;
+
+ h_subsample = drm_format_horz_chroma_subsampling(format);
+ v_subsample = drm_format_vert_chroma_subsampling(format);
+ vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample;
+ vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample;
+
+ vc4_state->x_scaling[1] =
+ vc4_get_scaling_mode(vc4_state->src_w[1],
+ vc4_state->crtc_w);
+ vc4_state->y_scaling[1] =
+ vc4_get_scaling_mode(vc4_state->src_h[1],
+ vc4_state->crtc_h);
+
+ /* YUV conversion requires that scaling be enabled,
+ * even on a plane that's otherwise 1:1. Choose TPZ
+ * for simplicity.
+ */
+ if (vc4_state->x_scaling[0] == VC4_SCALING_NONE)
+ vc4_state->x_scaling[0] = VC4_SCALING_TPZ;
+ if (vc4_state->y_scaling[0] == VC4_SCALING_NONE)
+ vc4_state->y_scaling[0] = VC4_SCALING_TPZ;
+ }
+
+ vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
+ vc4_state->y_scaling[0] == VC4_SCALING_NONE &&
+ vc4_state->x_scaling[1] == VC4_SCALING_NONE &&
+ vc4_state->y_scaling[1] == VC4_SCALING_NONE);
+
+ /* No configuring scaling on the cursor plane, since it gets
+ non-vblank-synced updates, and scaling requires requires
+ LBM changes which have to be vblank-synced.
+ */
+ if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity)
+ return -EINVAL;
+
+ /* Clamp the on-screen start x/y to 0. The hardware doesn't
+ * support negative y, and negative x wastes bandwidth.
+ */
+ if (vc4_state->crtc_x < 0) {
+ for (i = 0; i < num_planes; i++) {
+ u32 cpp = drm_format_plane_cpp(fb->pixel_format, i);
+ u32 subs = ((i == 0) ? 1 : h_subsample);
+
+ vc4_state->offsets[i] += (cpp *
+ (-vc4_state->crtc_x) / subs);
+ }
+ vc4_state->src_w[0] += vc4_state->crtc_x;
+ vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample;
+ vc4_state->crtc_x = 0;
+ }
+
+ if (vc4_state->crtc_y < 0) {
+ for (i = 0; i < num_planes; i++) {
+ u32 subs = ((i == 0) ? 1 : v_subsample);
+
+ vc4_state->offsets[i] += (fb->pitches[i] *
+ (-vc4_state->crtc_y) / subs);
+ }
+ vc4_state->src_h[0] += vc4_state->crtc_y;
+ vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample;
+ vc4_state->crtc_y = 0;
+ }
+
+ return 0;
+}
+
+static void vc4_write_tpz(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
+{
+ u32 scale, recip;
+
+ scale = (1 << 16) * src / dst;
+
+ /* The specs note that while the reciprocal would be defined
+ * as (1<<32)/scale, ~0 is close enough.
+ */
+ recip = ~0 / scale;
+
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(scale, SCALER_TPZ0_SCALE) |
+ VC4_SET_FIELD(0, SCALER_TPZ0_IPHASE));
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(recip, SCALER_TPZ1_RECIP));
+}
+
+static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
+{
+ u32 scale = (1 << 16) * src / dst;
+
+ vc4_dlist_write(vc4_state,
+ SCALER_PPF_AGC |
+ VC4_SET_FIELD(scale, SCALER_PPF_SCALE) |
+ VC4_SET_FIELD(0, SCALER_PPF_IPHASE));
+}
+
+static u32 vc4_lbm_size(struct drm_plane_state *state)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+ /* This is the worst case number. One of the two sizes will
+ * be used depending on the scaling configuration.
+ */
+ u32 pix_per_line = max(vc4_state->src_w[0], (u32)vc4_state->crtc_w);
+ u32 lbm;
+
+ if (!vc4_state->is_yuv) {
+ if (vc4_state->is_unity)
+ return 0;
+ else if (vc4_state->y_scaling[0] == VC4_SCALING_TPZ)
+ lbm = pix_per_line * 8;
+ else {
+ /* In special cases, this multiplier might be 12. */
+ lbm = pix_per_line * 16;
+ }
+ } else {
+ /* There are cases for this going down to a multiplier
+ * of 2, but according to the firmware source, the
+ * table in the docs is somewhat wrong.
+ */
+ lbm = pix_per_line * 16;
+ }
+
+ lbm = roundup(lbm, 32);
+
+ return lbm;
+}
+
+static void vc4_write_scaling_parameters(struct drm_plane_state *state,
+ int channel)
+{
+ struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+
+ /* Ch0 H-PPF Word 0: Scaling Parameters */
+ if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) {
+ vc4_write_ppf(vc4_state,
+ vc4_state->src_w[channel], vc4_state->crtc_w);
+ }
+
+ /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */
+ if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) {
+ vc4_write_ppf(vc4_state,
+ vc4_state->src_h[channel], vc4_state->crtc_h);
+ vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+ }
+
+ /* Ch0 H-TPZ Words 0-1: Scaling Parameters, Recip */
+ if (vc4_state->x_scaling[channel] == VC4_SCALING_TPZ) {
+ vc4_write_tpz(vc4_state,
+ vc4_state->src_w[channel], vc4_state->crtc_w);
+ }
+
+ /* Ch0 V-TPZ Words 0-2: Scaling Parameters, Recip, Context */
+ if (vc4_state->y_scaling[channel] == VC4_SCALING_TPZ) {
+ vc4_write_tpz(vc4_state,
+ vc4_state->src_h[channel], vc4_state->crtc_h);
+ vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+ }
+}
+
/* Writes out a full display list for an active plane to the plane's
* private dlist state.
*/
static int vc4_plane_mode_set(struct drm_plane *plane,
struct drm_plane_state *state)
{
+ struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
struct drm_framebuffer *fb = state->fb;
- struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
u32 ctl0_offset = vc4_state->dlist_count;
const struct hvs_format *format = vc4_get_hvs_format(fb->pixel_format);
- uint32_t offset = fb->offsets[0];
- int crtc_x = state->crtc_x;
- int crtc_y = state->crtc_y;
- int crtc_w = state->crtc_w;
- int crtc_h = state->crtc_h;
-
- if (state->crtc_w << 16 != state->src_w ||
- state->crtc_h << 16 != state->src_h) {
- /* We don't support scaling yet, which involves
- * allocating the LBM memory for scaling temporary
- * storage, and putting filter kernels in the HVS
- * context.
- */
- return -EINVAL;
+ int num_planes = drm_format_num_planes(format->drm);
+ u32 scl0, scl1;
+ u32 lbm_size;
+ unsigned long irqflags;
+ int ret, i;
+
+ ret = vc4_plane_setup_clipping_and_scaling(state);
+ if (ret)
+ return ret;
+
+ /* Allocate the LBM memory that the HVS will use for temporary
+ * storage due to our scaling/format conversion.
+ */
+ lbm_size = vc4_lbm_size(state);
+ if (lbm_size) {
+ if (!vc4_state->lbm.allocated) {
+ spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
+ ret = drm_mm_insert_node(&vc4->hvs->lbm_mm,
+ &vc4_state->lbm,
+ lbm_size, 32, 0);
+ spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
+ } else {
+ WARN_ON_ONCE(lbm_size != vc4_state->lbm.size);
+ }
}
- if (crtc_x < 0) {
- offset += drm_format_plane_cpp(fb->pixel_format, 0) * -crtc_x;
- crtc_w += crtc_x;
- crtc_x = 0;
- }
+ if (ret)
+ return ret;
- if (crtc_y < 0) {
- offset += fb->pitches[0] * -crtc_y;
- crtc_h += crtc_y;
- crtc_y = 0;
+ /* SCL1 is used for Cb/Cr scaling of planar formats. For RGB
+ * and 4:4:4, scl1 should be set to scl0 so both channels of
+ * the scaler do the same thing. For YUV, the Y plane needs
+ * to be put in channel 1 and Cb/Cr in channel 0, so we swap
+ * the scl fields here.
+ */
+ if (num_planes == 1) {
+ scl0 = vc4_get_scl_field(state, 1);
+ scl1 = scl0;
+ } else {
+ scl0 = vc4_get_scl_field(state, 1);
+ scl1 = vc4_get_scl_field(state, 0);
}
+ /* Control word */
vc4_dlist_write(vc4_state,
SCALER_CTL0_VALID |
(format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
(format->hvs << SCALER_CTL0_PIXEL_FORMAT_SHIFT) |
- SCALER_CTL0_UNITY);
+ (vc4_state->is_unity ? SCALER_CTL0_UNITY : 0) |
+ VC4_SET_FIELD(scl0, SCALER_CTL0_SCL0) |
+ VC4_SET_FIELD(scl1, SCALER_CTL0_SCL1));
/* Position Word 0: Image Positions and Alpha Value */
+ vc4_state->pos0_offset = vc4_state->dlist_count;
vc4_dlist_write(vc4_state,
VC4_SET_FIELD(0xff, SCALER_POS0_FIXED_ALPHA) |
- VC4_SET_FIELD(crtc_x, SCALER_POS0_START_X) |
- VC4_SET_FIELD(crtc_y, SCALER_POS0_START_Y));
-
- /* Position Word 1: Scaled Image Dimensions.
- * Skipped due to SCALER_CTL0_UNITY scaling.
- */
+ VC4_SET_FIELD(vc4_state->crtc_x, SCALER_POS0_START_X) |
+ VC4_SET_FIELD(vc4_state->crtc_y, SCALER_POS0_START_Y));
+
+ /* Position Word 1: Scaled Image Dimensions. */
+ if (!vc4_state->is_unity) {
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(vc4_state->crtc_w,
+ SCALER_POS1_SCL_WIDTH) |
+ VC4_SET_FIELD(vc4_state->crtc_h,
+ SCALER_POS1_SCL_HEIGHT));
+ }
/* Position Word 2: Source Image Size, Alpha Mode */
+ vc4_state->pos2_offset = vc4_state->dlist_count;
vc4_dlist_write(vc4_state,
VC4_SET_FIELD(format->has_alpha ?
SCALER_POS2_ALPHA_MODE_PIPELINE :
SCALER_POS2_ALPHA_MODE_FIXED,
SCALER_POS2_ALPHA_MODE) |
- VC4_SET_FIELD(crtc_w, SCALER_POS2_WIDTH) |
- VC4_SET_FIELD(crtc_h, SCALER_POS2_HEIGHT));
+ VC4_SET_FIELD(vc4_state->src_w[0], SCALER_POS2_WIDTH) |
+ VC4_SET_FIELD(vc4_state->src_h[0], SCALER_POS2_HEIGHT));
/* Position Word 3: Context. Written by the HVS. */
vc4_dlist_write(vc4_state, 0xc0c0c0c0);
- vc4_state->pw0_offset = vc4_state->dlist_count;
- /* Pointer Word 0: RGB / Y Pointer */
- vc4_dlist_write(vc4_state, bo->paddr + offset);
+ /* Pointer Word 0/1/2: RGB / Y / Cb / Cr Pointers
+ *
+ * The pointers may be any byte address.
+ */
+ vc4_state->ptr0_offset = vc4_state->dlist_count;
+ if (!format->flip_cbcr) {
+ for (i = 0; i < num_planes; i++)
+ vc4_dlist_write(vc4_state, vc4_state->offsets[i]);
+ } else {
+ WARN_ON_ONCE(num_planes != 3);
+ vc4_dlist_write(vc4_state, vc4_state->offsets[0]);
+ vc4_dlist_write(vc4_state, vc4_state->offsets[2]);
+ vc4_dlist_write(vc4_state, vc4_state->offsets[1]);
+ }
- /* Pointer Context Word 0: Written by the HVS */
- vc4_dlist_write(vc4_state, 0xc0c0c0c0);
+ /* Pointer Context Word 0/1/2: Written by the HVS */
+ for (i = 0; i < num_planes; i++)
+ vc4_dlist_write(vc4_state, 0xc0c0c0c0);
- /* Pitch word 0: Pointer 0 Pitch */
- vc4_dlist_write(vc4_state,
- VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH));
+ /* Pitch word 0/1/2 */
+ for (i = 0; i < num_planes; i++) {
+ vc4_dlist_write(vc4_state,
+ VC4_SET_FIELD(fb->pitches[i], SCALER_SRC_PITCH));
+ }
+
+ /* Colorspace conversion words */
+ if (vc4_state->is_yuv) {
+ vc4_dlist_write(vc4_state, SCALER_CSC0_ITR_R_601_5);
+ vc4_dlist_write(vc4_state, SCALER_CSC1_ITR_R_601_5);
+ vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5);
+ }
+
+ if (!vc4_state->is_unity) {
+ /* LBM Base Address. */
+ if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
+ vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
+ vc4_dlist_write(vc4_state, vc4_state->lbm.start);
+ }
+
+ if (num_planes > 1) {
+ /* Emit Cb/Cr as channel 0 and Y as channel
+ * 1. This matches how we set up scl0/scl1
+ * above.
+ */
+ vc4_write_scaling_parameters(state, 1);
+ }
+ vc4_write_scaling_parameters(state, 0);
+
+ /* If any PPF setup was done, then all the kernel
+ * pointers get uploaded.
+ */
+ if (vc4_state->x_scaling[0] == VC4_SCALING_PPF ||
+ vc4_state->y_scaling[0] == VC4_SCALING_PPF ||
+ vc4_state->x_scaling[1] == VC4_SCALING_PPF ||
+ vc4_state->y_scaling[1] == VC4_SCALING_PPF) {
+ u32 kernel = VC4_SET_FIELD(vc4->hvs->mitchell_netravali_filter.start,
+ SCALER_PPF_KERNEL_OFFSET);
+
+ /* HPPF plane 0 */
+ vc4_dlist_write(vc4_state, kernel);
+ /* VPPF plane 0 */
+ vc4_dlist_write(vc4_state, kernel);
+ /* HPPF plane 1 */
+ vc4_dlist_write(vc4_state, kernel);
+ /* VPPF plane 1 */
+ vc4_dlist_write(vc4_state, kernel);
+ }
+ }
vc4_state->dlist[ctl0_offset] |=
VC4_SET_FIELD(vc4_state->dlist_count, SCALER_CTL0_SIZE);
* scanout will start from this address as soon as the FIFO
* needs to refill with pixels.
*/
- writel(addr, &vc4_state->hw_dlist[vc4_state->pw0_offset]);
+ writel(addr, &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
/* Also update the CPU-side dlist copy, so that any later
* atomic updates that don't do a new modeset on our plane
* also use our updated address.
*/
- vc4_state->dlist[vc4_state->pw0_offset] = addr;
+ vc4_state->dlist[vc4_state->ptr0_offset] = addr;
}
static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
drm_plane_cleanup(plane);
}
+/* Implements immediate (non-vblank-synced) updates of the cursor
+ * position, or falls back to the atomic helper otherwise.
+ */
+static int
+vc4_update_plane(struct drm_plane *plane,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ struct drm_plane_state *plane_state;
+ struct vc4_plane_state *vc4_state;
+
+ if (plane != crtc->cursor)
+ goto out;
+
+ plane_state = plane->state;
+ vc4_state = to_vc4_plane_state(plane_state);
+
+ if (!plane_state)
+ goto out;
+
+ /* If we're changing the cursor contents, do that in the
+ * normal vblank-synced atomic path.
+ */
+ if (fb != plane_state->fb)
+ goto out;
+
+ /* No configuring new scaling in the fast path. */
+ if (crtc_w != plane_state->crtc_w ||
+ crtc_h != plane_state->crtc_h ||
+ src_w != plane_state->src_w ||
+ src_h != plane_state->src_h) {
+ goto out;
+ }
+
+ /* Set the cursor's position on the screen. This is the
+ * expected change from the drm_mode_cursor_universal()
+ * helper.
+ */
+ plane_state->crtc_x = crtc_x;
+ plane_state->crtc_y = crtc_y;
+
+ /* Allow changing the start position within the cursor BO, if
+ * that matters.
+ */
+ plane_state->src_x = src_x;
+ plane_state->src_y = src_y;
+
+ /* Update the display list based on the new crtc_x/y. */
+ vc4_plane_atomic_check(plane, plane_state);
+
+ /* Note that we can't just call vc4_plane_write_dlist()
+ * because that would smash the context data that the HVS is
+ * currently using.
+ */
+ writel(vc4_state->dlist[vc4_state->pos0_offset],
+ &vc4_state->hw_dlist[vc4_state->pos0_offset]);
+ writel(vc4_state->dlist[vc4_state->pos2_offset],
+ &vc4_state->hw_dlist[vc4_state->pos2_offset]);
+ writel(vc4_state->dlist[vc4_state->ptr0_offset],
+ &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
+
+ return 0;
+
+out:
+ return drm_atomic_helper_update_plane(plane, crtc, fb,
+ crtc_x, crtc_y,
+ crtc_w, crtc_h,
+ src_x, src_y,
+ src_w, src_h);
+}
+
static const struct drm_plane_funcs vc4_plane_funcs = {
- .update_plane = drm_atomic_helper_update_plane,
+ .update_plane = vc4_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = vc4_plane_destroy,
.set_property = NULL,
struct drm_plane *plane = NULL;
struct vc4_plane *vc4_plane;
u32 formats[ARRAY_SIZE(hvs_formats)];
+ u32 num_formats = 0;
int ret = 0;
unsigned i;
goto fail;
}
- for (i = 0; i < ARRAY_SIZE(hvs_formats); i++)
- formats[i] = hvs_formats[i].drm;
+ for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
+ /* Don't allow YUV in cursor planes, since that means
+ * tuning on the scaler, which we don't allow for the
+ * cursor.
+ */
+ if (type != DRM_PLANE_TYPE_CURSOR ||
+ hvs_formats[i].hvs < HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE) {
+ formats[num_formats++] = hvs_formats[i].drm;
+ }
+ }
plane = &vc4_plane->base;
ret = drm_universal_plane_init(dev, plane, 0xff,
&vc4_plane_funcs,
- formats, ARRAY_SIZE(formats),
+ formats, num_formats,
type, NULL);
drm_plane_helper_add(plane, &vc4_plane_helper_funcs);
projects / mirror_ubuntu-artful-kernel.git / blobdiff