*/
buttons = (data[4] << 1) | (data[3] & 0x01);
} else if (features->type == CINTIQ_COMPANION_2) {
- /* d-pad right -> data[4] & 0x10
- * d-pad up -> data[4] & 0x20
- * d-pad left -> data[4] & 0x40
- * d-pad down -> data[4] & 0x80
- * d-pad center -> data[3] & 0x01
+ /* d-pad right -> data[2] & 0x10
+ * d-pad up -> data[2] & 0x20
+ * d-pad left -> data[2] & 0x40
+ * d-pad down -> data[2] & 0x80
+ * d-pad center -> data[1] & 0x01
*/
buttons = ((data[2] >> 4) << 7) |
- ((data[1] & 0x04) << 6) |
+ ((data[1] & 0x04) << 4) |
((data[2] & 0x0F) << 2) |
(data[1] & 0x03);
} else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
return tool_type;
}
+static void wacom_exit_report(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->pen_input;
+ struct wacom_features *features = &wacom->features;
+ unsigned char *data = wacom->data;
+ int idx = (features->type == INTUOS) ? (data[1] & 0x01) : 0;
+
+ /*
+ * Reset all states otherwise we lose the initial states
+ * when in-prox next time
+ */
+ input_report_abs(input, ABS_X, 0);
+ input_report_abs(input, ABS_Y, 0);
+ input_report_abs(input, ABS_DISTANCE, 0);
+ input_report_abs(input, ABS_TILT_X, 0);
+ input_report_abs(input, ABS_TILT_Y, 0);
+ if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
+ input_report_key(input, BTN_LEFT, 0);
+ input_report_key(input, BTN_MIDDLE, 0);
+ input_report_key(input, BTN_RIGHT, 0);
+ input_report_key(input, BTN_SIDE, 0);
+ input_report_key(input, BTN_EXTRA, 0);
+ input_report_abs(input, ABS_THROTTLE, 0);
+ input_report_abs(input, ABS_RZ, 0);
+ } else {
+ input_report_abs(input, ABS_PRESSURE, 0);
+ input_report_key(input, BTN_STYLUS, 0);
+ input_report_key(input, BTN_STYLUS2, 0);
+ input_report_key(input, BTN_TOUCH, 0);
+ input_report_abs(input, ABS_WHEEL, 0);
+ if (features->type >= INTUOS3S)
+ input_report_abs(input, ABS_Z, 0);
+ }
+ input_report_key(input, wacom->tool[idx], 0);
+ input_report_abs(input, ABS_MISC, 0); /* reset tool id */
+ input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+ wacom->id[idx] = 0;
+}
+
static int wacom_intuos_inout(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
if (!wacom->id[idx])
return 1;
- /*
- * Reset all states otherwise we lose the initial states
- * when in-prox next time
- */
- input_report_abs(input, ABS_X, 0);
- input_report_abs(input, ABS_Y, 0);
- input_report_abs(input, ABS_DISTANCE, 0);
- input_report_abs(input, ABS_TILT_X, 0);
- input_report_abs(input, ABS_TILT_Y, 0);
- if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
- input_report_key(input, BTN_LEFT, 0);
- input_report_key(input, BTN_MIDDLE, 0);
- input_report_key(input, BTN_RIGHT, 0);
- input_report_key(input, BTN_SIDE, 0);
- input_report_key(input, BTN_EXTRA, 0);
- input_report_abs(input, ABS_THROTTLE, 0);
- input_report_abs(input, ABS_RZ, 0);
- } else {
- input_report_abs(input, ABS_PRESSURE, 0);
- input_report_key(input, BTN_STYLUS, 0);
- input_report_key(input, BTN_STYLUS2, 0);
- input_report_key(input, BTN_TOUCH, 0);
- input_report_abs(input, ABS_WHEEL, 0);
- if (features->type >= INTUOS3S)
- input_report_abs(input, ABS_Z, 0);
- }
- input_report_key(input, wacom->tool[idx], 0);
- input_report_abs(input, ABS_MISC, 0); /* reset tool id */
- input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
- wacom->id[idx] = 0;
+ wacom_exit_report(wacom);
return 2;
}
y >>= 1;
distance >>= 1;
}
+ if (features->type == INTUOSHT2)
+ distance = features->distance_max - distance;
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
input_report_abs(input, ABS_DISTANCE, distance);
input_report_key(input, BTN_BASE2, (data[11] & 0x02));
if (data[12] & 0x80)
- input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
+ input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f) - 1);
else
input_report_abs(input, ABS_WHEEL, 0);
/* Add back in missing bits of ID for non-USI pens */
wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF;
}
- wacom->tool[0] = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0]));
for (i = 0; i < pen_frames; i++) {
unsigned char *frame = &data[i*pen_frame_len + 1];
bool valid = frame[0] & 0x80;
bool prox = frame[0] & 0x40;
bool range = frame[0] & 0x20;
+ bool invert = frame[0] & 0x10;
if (!valid)
continue;
+ if (!prox) {
+ wacom->shared->stylus_in_proximity = false;
+ wacom_exit_report(wacom);
+ input_sync(pen_input);
+
+ wacom->tool[0] = 0;
+ wacom->id[0] = 0;
+ wacom->serial[0] = 0;
+ return;
+ }
+
if (range) {
/* Fix rotation alignment: userspace expects zero at left */
int16_t rotation = (int16_t)get_unaligned_le16(&frame[9]);
if (rotation > 899)
rotation -= 1800;
+ if (!wacom->tool[0]) { /* first in range */
+ /* Going into range select tool */
+ if (invert)
+ wacom->tool[0] = BTN_TOOL_RUBBER;
+ else if (wacom->id[0])
+ wacom->tool[0] = wacom_intuos_get_tool_type(wacom->id[0]);
+ else
+ wacom->tool[0] = BTN_TOOL_PEN;
+ }
+
input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1]));
input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3]));
input_report_abs(pen_input, ABS_TILT_X, (char)frame[7]);
input_report_abs(pen_input, ABS_Z, rotation);
input_report_abs(pen_input, ABS_WHEEL, get_unaligned_le16(&frame[11]));
}
- input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5]));
- input_report_abs(pen_input, ABS_DISTANCE, range ? frame[13] : wacom->features.distance_max);
-
- input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x01);
- input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02);
- input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04);
-
- input_report_key(pen_input, wacom->tool[0], prox);
- input_event(pen_input, EV_MSC, MSC_SERIAL, wacom->serial[0]);
- input_report_abs(pen_input, ABS_MISC,
- wacom_intuos_id_mangle(wacom->id[0])); /* report tool id */
+ if (wacom->tool[0]) {
+ input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5]));
+ input_report_abs(pen_input, ABS_DISTANCE, range ? frame[13] : wacom->features.distance_max);
+
+ input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x09);
+ input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02);
+ input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04);
+
+ input_report_key(pen_input, wacom->tool[0], prox);
+ input_event(pen_input, EV_MSC, MSC_SERIAL, wacom->serial[0]);
+ input_report_abs(pen_input, ABS_MISC,
+ wacom_intuos_id_mangle(wacom->id[0])); /* report tool id */
+ }
wacom->shared->stylus_in_proximity = prox;
if (wacom->num_contacts_left <= 0) {
wacom->num_contacts_left = 0;
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
+ input_sync(touch_input);
}
}
- input_report_switch(touch_input, SW_MUTE_DEVICE, !(data[281] >> 7));
- input_sync(touch_input);
+ if (wacom->num_contacts_left == 0) {
+ // Be careful that we don't accidentally call input_sync with
+ // only a partial set of fingers of processed
+ input_report_switch(touch_input, SW_MUTE_DEVICE, !(data[281] >> 7));
+ input_sync(touch_input);
+ }
+
}
static void wacom_intuos_pro2_bt_pad(struct wacom_wac *wacom)
struct input_dev *pad_input = wacom->pad_input;
unsigned char *data = wacom->data;
- int buttons = (data[282] << 1) | ((data[281] >> 6) & 0x01);
+ int buttons = data[282] | ((data[281] & 0x40) << 2);
int ring = data[285] & 0x7F;
bool ringstatus = data[285] & 0x80;
bool prox = buttons || ringstatus;
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_BUTTONCENTER:
- wacom->generic_has_leds = true;
- /* fall through */
case WACOM_HID_WD_BUTTONHOME:
case WACOM_HID_WD_BUTTONUP:
case WACOM_HID_WD_BUTTONDOWN:
struct wacom_features *features = &wacom_wac->features;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
int i;
- bool is_touch_on = value;
bool do_report = false;
/*
break;
case WACOM_HID_WD_MUTE_DEVICE:
- if (wacom_wac->shared->touch_input && value) {
- wacom_wac->shared->is_touch_on = !wacom_wac->shared->is_touch_on;
- is_touch_on = wacom_wac->shared->is_touch_on;
- }
-
- /* fall through*/
case WACOM_HID_WD_TOUCHONOFF:
if (wacom_wac->shared->touch_input) {
+ bool *is_touch_on = &wacom_wac->shared->is_touch_on;
+
+ if (equivalent_usage == WACOM_HID_WD_MUTE_DEVICE && value)
+ *is_touch_on = !(*is_touch_on);
+ else if (equivalent_usage == WACOM_HID_WD_TOUCHONOFF)
+ *is_touch_on = value;
+
input_report_switch(wacom_wac->shared->touch_input,
- SW_MUTE_DEVICE, !is_touch_on);
+ SW_MUTE_DEVICE, !(*is_touch_on));
input_sync(wacom_wac->shared->touch_input);
}
break;
case HID_DG_TOOLSERIALNUMBER:
if (value) {
wacom_wac->serial[0] = (wacom_wac->serial[0] & ~0xFFFFFFFFULL);
- wacom_wac->serial[0] |= (__u32)value;
+ wacom_wac->serial[0] |= wacom_s32tou(value, field->report_size);
}
return;
case HID_DG_TWIST:
return;
case WACOM_HID_WD_SERIALHI:
if (value) {
+ __u32 raw_value = wacom_s32tou(value, field->report_size);
+
wacom_wac->serial[0] = (wacom_wac->serial[0] & 0xFFFFFFFF);
- wacom_wac->serial[0] |= ((__u64)value) << 32;
+ wacom_wac->serial[0] |= ((__u64)raw_value) << 32;
/*
* Non-USI EMR devices may contain additional tool type
* information here. See WACOM_HID_WD_TOOLTYPE case for
* more details.
*/
if (value >> 20 == 1) {
- wacom_wac->id[0] |= value & 0xFFFFF;
+ wacom_wac->id[0] |= raw_value & 0xFFFFF;
}
}
return;
* bitwise OR so the complete value can be built
* up over time :(
*/
- wacom_wac->id[0] |= value;
+ wacom_wac->id[0] |= wacom_s32tou(value, field->report_size);
return;
case WACOM_HID_WD_OFFSETLEFT:
if (features->offset_left && value != features->offset_left)
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
+ struct wacom_features *features = &wacom->wacom_wac.features;
switch (equivalent_usage) {
case HID_GD_X:
case HID_DG_TIPSWITCH:
wacom_wac->hid_data.tipswitch = value;
break;
+ case HID_DG_CONTACTMAX:
+ features->touch_max = value;
+ return;
}
if (features->type >= INTUOSHT && features->type <= BAMBOO_PT)
features->device_type |= WACOM_DEVICETYPE_PAD;
- features->x_max = 4096;
- features->y_max = 4096;
+ if (features->type == INTUOSHT2) {
+ features->x_max = features->x_max / 10;
+ features->y_max = features->y_max / 10;
+ }
+ else {
+ features->x_max = 4096;
+ features->y_max = 4096;
+ }
}
else if (features->pktlen == WACOM_PKGLEN_BBTOUCH) {
features->device_type |= WACOM_DEVICETYPE_PAD;
0, 5920, 4, 0);
}
input_abs_set_res(input_dev, ABS_MT_POSITION_X, 40);
- input_abs_set_res(input_dev, ABS_MT_POSITION_X, 40);
+ input_abs_set_res(input_dev, ABS_MT_POSITION_Y, 40);
/* fall through */
static bool wacom_is_led_toggled(struct wacom *wacom, int button_count,
int mask, int group)
{
- int button_per_group;
+ int group_button;
/*
* 21UX2 has LED group 1 to the left and LED group 0
if (wacom->wacom_wac.features.type == WACOM_21UX2)
group = 1 - group;
- button_per_group = button_count/wacom->led.count;
+ group_button = group * (button_count/wacom->led.count);
+
+ if (wacom->wacom_wac.features.type == INTUOSP2_BT)
+ group_button = 8;
- return mask & (1 << (group * button_per_group));
+ return mask & (1 << group_button);
}
static void wacom_update_led(struct wacom *wacom, int button_count, int mask,
projects / mirror_ubuntu-bionic-kernel.git / blobdiff