additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_BCM590XX
+ tristate "Broadcom BCM590xx PMUs"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C
+ help
+ Support for the BCM590xx PMUs from Broadcom
+
config MFD_CROS_EC
tristate "ChromeOS Embedded Controller"
select MFD_CORE
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
help
- Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+ Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
usually found on PXA processors-based platforms. This includes
the I2C driver and the core APIs _only_, you have to select
device may provide functions like watchdog, GPIO, UART and I2C bus.
The following modules are supported:
+ * COMe-bHL6
* COMe-bIP#
* COMe-bPC2 (ETXexpress-PC)
* COMe-bSC# (ETXexpress-SC T#)
+ * COMe-cBT6
* COMe-cCT6
* COMe-cDC2 (microETXexpress-DC)
+ * COMe-cHL6
* COMe-cPC2 (microETXexpress-PC)
+ * COMe-mBT10
* COMe-mCT10
+ * COMe-mTT10 (nanoETXexpress-TT)
* ETX-OH
This driver can also be built as a module. If so, the module
battery-charger under the corresponding menus.
config MFD_MAX14577
- bool "Maxim Semiconductor MAX14577 MUIC + Charger Support"
+ bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
depends on I2C=y
select MFD_CORE
select REGMAP_I2C
+ select REGMAP_IRQ
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX14577.
- This is a Micro-USB IC with Charger controls on chip.
+ Say yes here to add support for Maxim Semiconductor MAX14577 and
+ MAX77836 Micro-USB ICs with battery charger.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
of the device.
select REGMAP_I2C
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX77686.
+ Say yes here to add support for Maxim Semiconductor MAX77686.
This is a Power Management IC with RTC on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
select MFD_CORE
select REGMAP_I2C
help
- Say yes here to support for Maxim Semiconductor MAX77693.
+ Say yes here to add support for Maxim Semiconductor MAX77693.
This is a companion Power Management IC with Flash, Haptic, Charger,
and MUIC(Micro USB Interface Controller) controls on chip.
This driver provides common support for accessing the device;
select REGMAP_I2C
select REGMAP_IRQ
help
- Say yes here to support for Maxim Semiconductor MAX8907. This is
+ Say yes here to add support for Maxim Semiconductor MAX8907. This is
a Power Management IC. This driver provides common support for
accessing the device; additional drivers must be enabled in order
to use the functionality of the device.
depends on I2C=y
select MFD_CORE
help
- Say yes here to support for Maxim Semiconductor MAX8925. This is
+ Say yes here to add support for Maxim Semiconductor MAX8925. This is
a Power Management IC. This driver provides common support for
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
select MFD_CORE
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX8997/8966.
+ Say yes here to add support for Maxim Semiconductor MAX8997/8966.
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
MUIC controls on chip.
This driver provides common support for accessing the device;
select MFD_CORE
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX8998 and
+ Say yes here to add support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
config MFD_PM8921_CORE
tristate "Qualcomm PM8921 PMIC chip"
- depends on (ARCH_MSM || HEXAGON)
- depends on BROKEN
+ depends on (ARM || HEXAGON)
+ select IRQ_DOMAIN
select MFD_CORE
select MFD_PM8XXX
+ select REGMAP
help
If you say yes to this option, support will be included for the
built-in PM8921 PMIC chip.
Say M here if you want to include support for PM8921 chip as a module.
This will build a module called "pm8921-core".
-config MFD_PM8XXX_IRQ
- bool "Qualcomm PM8xxx IRQ features"
- depends on MFD_PM8XXX
- default y if MFD_PM8XXX
- help
- This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
-
- This is required to use certain other PM 8xxx features, such as GPIO
- and MPP.
-
config MFD_RDC321X
tristate "RDC R-321x southbridge"
select MFD_CORE
types of memory cards, such as Memory Stick, Memory Stick Pro,
Secure Digital and MultiMediaCard.
+config MFD_RTSX_USB
+ tristate "Realtek USB card reader"
+ depends on USB
+ select MFD_CORE
+ help
+ Select this option to get support for Realtek USB 2.0 card readers
+ including RTS5129, RTS5139, RTS5179 and RTS5170.
+ Realtek card reader supports access to many types of memory cards,
+ such as Memory Stick Pro, Secure Digital and MultiMediaCard.
+
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
depends on I2C=y
config MFD_STMPE
bool "STMicroelectronics STMPE"
depends on (I2C=y || SPI_MASTER=y)
+ depends on OF
select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
If you say yes here you get support for the Palmas
series of PMIC chips from Texas Instruments.
-config MFD_TI_SSP
- tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X
- select MFD_CORE
- ---help---
- Say Y here if you want support for the Sequencer Serial Port
- in a Texas Instruments TNETV107X SoC.
-
- To compile this driver as a module, choose M here: the
- module will be called ti-ssp.
-
config TPS6105X
tristate "TI TPS61050/61052 Boost Converters"
depends on I2C
This driver can also be built as a module. If so, the module
will be called tps65217.
+config MFD_TPS65218
+ tristate "TI TPS65218 Power Management chips"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ If you say yes here you get support for the TPS65218 series of
+ Power Management chips.
+ These include voltage regulators, gpio and other features
+ that are often used in portable devices. Only regulator
+ component is currently supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65218.
+
config MFD_TPS6586X
bool "TI TPS6586x Power Management chips"
depends on I2C=y
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
-config TWL4030_MADC
- tristate "TI TWL4030 MADC"
- depends on TWL4030_CORE
- help
- This driver provides support for triton TWL4030-MADC. The
- driver supports both RT and SW conversion methods.
-
- This driver can be built as a module. If so it will be
- named twl4030-madc
-
config TWL4030_POWER
bool "TI TWL4030 power resources"
depends on TWL4030_CORE && ARM
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
-endmenu
-endif
-
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
help
Platform configuration infrastructure for the ARM Ltd.
Versatile Express.
+
+endmenu
+endif
projects / mirror_ubuntu-zesty-kernel.git / blobdiff