int mmc_send_status(struct mmc_card *card, u32 *status)
{
int err;
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
cmd.opcode = MMC_SEND_STATUS;
if (!mmc_host_is_spi(card->host))
static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
{
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
cmd.opcode = MMC_SELECT_CARD;
*/
int mmc_set_dsr(struct mmc_host *host)
{
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
cmd.opcode = MMC_SET_DSR;
int mmc_go_idle(struct mmc_host *host)
{
int err;
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
/*
* Non-SPI hosts need to prevent chipselect going active during
int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
{
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
int i, err = 0;
cmd.opcode = MMC_SEND_OP_COND;
int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
{
int err;
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
cmd.opcode = MMC_ALL_SEND_CID;
cmd.arg = 0;
int mmc_set_relative_addr(struct mmc_card *card)
{
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
cmd.opcode = MMC_SET_RELATIVE_ADDR;
cmd.arg = card->rca << 16;
mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
{
int err;
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
cmd.opcode = opcode;
cmd.arg = arg;
mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
u32 opcode, void *buf, unsigned len)
{
- struct mmc_request mrq = {NULL};
- struct mmc_command cmd = {0};
- struct mmc_data data = {0};
+ struct mmc_request mrq = {};
+ struct mmc_command cmd = {};
+ struct mmc_data data = {};
struct scatterlist sg;
mrq.cmd = &cmd;
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
{
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
int err;
cmd.opcode = MMC_SPI_READ_OCR;
int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
{
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
int err;
cmd.opcode = MMC_SPI_CRC_ON_OFF;
{
struct mmc_host *host = card->host;
int err;
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
bool use_r1b_resp = use_busy_signal;
unsigned char old_timing = host->ios.timing;
int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error)
{
- struct mmc_request mrq = {NULL};
- struct mmc_command cmd = {0};
- struct mmc_data data = {0};
+ struct mmc_request mrq = {};
+ struct mmc_command cmd = {};
+ struct mmc_data data = {};
struct scatterlist sg;
struct mmc_ios *ios = &host->ios;
const u8 *tuning_block_pattern;
int mmc_abort_tuning(struct mmc_host *host, u32 opcode)
{
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
/*
* eMMC specification specifies that CMD12 can be used to stop a tuning
mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
u8 len)
{
- struct mmc_request mrq = {NULL};
- struct mmc_command cmd = {0};
- struct mmc_data data = {0};
+ struct mmc_request mrq = {};
+ struct mmc_command cmd = {};
+ struct mmc_data data = {};
struct scatterlist sg;
u8 *data_buf;
u8 *test_buf;
int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
{
- struct mmc_command cmd = {0};
+ struct mmc_command cmd = {};
unsigned int opcode;
int err;