mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers.

[mirror_ubuntu-bionic-kernel.git] / drivers / mmc / host / sdhci-st.c

diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c
index 1fbea9af7ae45f19bb5a339475a7afca8fd2266e..10989edb510071acf613acb59c2e1293fddf00e9 100644 (file)
--- a/drivers/mmc/host/sdhci-st.c
+++ b/drivers/mmc/host/sdhci-st.c
@@ -138,6 +138,87 @@ static inline void st_mmcss_set_static_delay(void __iomem *ioaddr)
                        ioaddr + ST_TOP_MMC_TX_CLK_DLY);
 }
 
+/**
+ * st_mmcss_cconfig: configure the Arasan HC inside the flashSS.
+ * @np: dt device node.
+ * @host: sdhci host
+ * Description: this function is to configure the Arasan host controller.
+ * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated
+ * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5
+ * or eMMC4.3.  This has to be done before registering the sdhci host.
+ */
+static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host)
+{
+       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+       struct mmc_host *mhost = host->mmc;
+       u32 cconf2, cconf3, cconf4, cconf5;
+
+       if (!of_device_is_compatible(np, "st,sdhci-stih407"))
+               return;
+
+       cconf2 = ST_MMC_CCONFIG_2_DEFAULT;
+       cconf3 = ST_MMC_CCONFIG_3_DEFAULT;
+       cconf4 = ST_MMC_CCONFIG_4_DEFAULT;
+       cconf5 = ST_MMC_CCONFIG_5_DEFAULT;
+
+       writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT,
+                       host->ioaddr + ST_MMC_CCONFIG_REG_1);
+
+       /* Set clock frequency, default to 50MHz if max-frequency is not
+        * provided */
+
+       switch (mhost->f_max) {
+       case 200000000:
+               clk_set_rate(pltfm_host->clk, mhost->f_max);
+               cconf2 |= BASE_CLK_FREQ_200;
+               break;
+       case 100000000:
+               clk_set_rate(pltfm_host->clk, mhost->f_max);
+               cconf2 |= BASE_CLK_FREQ_100;
+               break;
+       default:
+               clk_set_rate(pltfm_host->clk, 50000000);
+               cconf2 |= BASE_CLK_FREQ_50;
+       }
+
+       writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2);
+
+       if (mhost->caps & MMC_CAP_NONREMOVABLE)
+               cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE;
+       else
+               /* CARD _D ET_CTRL */
+               writel_relaxed(ST_MMC_GP_OUTPUT_CD,
+                               host->ioaddr + ST_MMC_GP_OUTPUT);
+
+       if (mhost->caps & MMC_CAP_UHS_SDR50) {
+               /* use 1.8V */
+               cconf3 |= ST_MMC_CCONFIG_1P8_VOLT;
+               cconf4 |= ST_MMC_CCONFIG_SDR50;
+               /* Use tuning */
+               cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50;
+               /* Max timeout for retuning */
+               cconf5 |= RETUNING_TIMER_CNT_MAX;
+       }
+
+       if (mhost->caps & MMC_CAP_UHS_SDR104) {
+               /*
+                * SDR104 implies the HC can support HS200 mode, so
+                * it's mandatory to use 1.8V
+                */
+               cconf3 |= ST_MMC_CCONFIG_1P8_VOLT;
+               cconf4 |= ST_MMC_CCONFIG_SDR104;
+               /* Max timeout for retuning */
+               cconf5 |= RETUNING_TIMER_CNT_MAX;
+       }
+
+       if (mhost->caps & MMC_CAP_UHS_DDR50)
+               cconf4 |= ST_MMC_CCONFIG_DDR50;
+
+       writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3);
+       writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4);
+       writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5);
+}
+
 static inline void st_mmcss_set_dll(void __iomem *ioaddr)
 {
        if (!ioaddr)
@@ -214,6 +295,7 @@ static const struct sdhci_pltfm_data sdhci_st_pdata = {
 
 static int sdhci_st_probe(struct platform_device *pdev)
 {
+       struct device_node *np = pdev->dev.of_node;
        struct sdhci_host *host;
        struct st_mmc_platform_data *pdata;
        struct sdhci_pltfm_host *pltfm_host;
@@ -266,6 +348,9 @@ static int sdhci_st_probe(struct platform_device *pdev)
        pltfm_host->priv = pdata;
        pltfm_host->clk = clk;
 
+       /* Configure the Arasan HC inside the flashSS */
+       st_mmcss_cconfig(np, host);
+
        ret = sdhci_add_host(host);
        if (ret) {
                dev_err(&pdev->dev, "Failed sdhci_add_host\n");
@@ -333,12 +418,15 @@ static int sdhci_st_resume(struct device *dev)
        struct sdhci_host *host = dev_get_drvdata(dev);
        struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
        struct st_mmc_platform_data *pdata = pltfm_host->priv;
+       struct device_node *np = dev->of_node;
 
        clk_prepare_enable(pltfm_host->clk);
 
        if (pdata->rstc)
                reset_control_deassert(pdata->rstc);
 
+       st_mmcss_cconfig(np, host);
+
        return sdhci_resume_host(host);
 }
 #endif