/*******************************************************************************
-
- Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the Free
- Software Foundation; either version 2 of the License, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
-
+
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- The full GNU General Public License is included in this distribution in the
- file called LICENSE.
-
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
Contact Information:
Linux NICS <linux.nics@intel.com>
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
*******************************************************************************/
#include "e1000.h"
+#include <net/ip6_checksum.h>
char e1000_driver_name[] = "e1000";
static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "7.2.7-k2"DRIVERNAPI
+#define DRV_VERSION "7.3.15-k2"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
INTEL_E1000_ETHERNET_DEVICE(0x10B9),
INTEL_E1000_ETHERNET_DEVICE(0x10BA),
INTEL_E1000_ETHERNET_DEVICE(0x10BB),
+ INTEL_E1000_ETHERNET_DEVICE(0x10BC),
+ INTEL_E1000_ETHERNET_DEVICE(0x10C4),
+ INTEL_E1000_ETHERNET_DEVICE(0x10C5),
/* required last entry */
{0,}
};
MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+int e1000_up(struct e1000_adapter *adapter);
+void e1000_down(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
+void e1000_reset(struct e1000_adapter *adapter);
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *txdr);
+ struct e1000_tx_ring *txdr);
static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rxdr);
+ struct e1000_rx_ring *rxdr);
static void e1000_free_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring);
+ struct e1000_tx_ring *tx_ring);
static void e1000_free_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
-
-/* Local Function Prototypes */
+ struct e1000_rx_ring *rx_ring);
+void e1000_update_stats(struct e1000_adapter *adapter);
static int e1000_init_module(void);
static void e1000_exit_module(void);
static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
-static irqreturn_t e1000_intr(int irq, void *data, struct pt_regs *regs);
+static irqreturn_t e1000_intr(int irq, void *data);
+#ifdef CONFIG_PCI_MSI
+static irqreturn_t e1000_intr_msi(int irq, void *data);
+#endif
static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring);
#ifdef CONFIG_E1000_NAPI
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd);
+void e1000_set_ethtool_ops(struct net_device *netdev);
static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
static void e1000_tx_timeout(struct net_device *dev);
-static void e1000_reset_task(struct net_device *dev);
+static void e1000_reset_task(struct work_struct *work);
static void e1000_smartspeed(struct e1000_adapter *adapter);
static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
struct sk_buff *skb);
static void e1000_netpoll (struct net_device *netdev);
#endif
+extern void e1000_check_options(struct e1000_adapter *adapter);
+
static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state);
static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
.id_table = e1000_pci_tbl,
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
+#ifdef CONFIG_PM
/* Power Managment Hooks */
.suspend = e1000_suspend,
-#ifdef CONFIG_PM
.resume = e1000_resume,
#endif
.shutdown = e1000_shutdown,
flags = IRQF_SHARED;
#ifdef CONFIG_PCI_MSI
- if (adapter->hw.mac_type > e1000_82547_rev_2) {
+ if (adapter->hw.mac_type >= e1000_82571) {
adapter->have_msi = TRUE;
if ((err = pci_enable_msi(adapter->pdev))) {
DPRINTK(PROBE, ERR,
adapter->have_msi = FALSE;
}
}
- if (adapter->have_msi)
+ if (adapter->have_msi) {
flags &= ~IRQF_SHARED;
+ err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags,
+ netdev->name, netdev);
+ if (err)
+ DPRINTK(PROBE, ERR,
+ "Unable to allocate interrupt Error: %d\n", err);
+ } else
#endif
if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
netdev->name, netdev)))
* e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that the
* driver is no longer loaded. For AMT version (only with 82573) i
- * of the f/w this means that the netowrk i/f is closed.
+ * of the f/w this means that the network i/f is closed.
*
**/
* e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that
* the driver is loaded. For AMT version (only with 82573)
- * of the f/w this means that the netowrk i/f is open.
+ * of the f/w this means that the network i/f is open.
*
**/
uint32_t ctrl_ext;
uint32_t swsm;
uint32_t extcnf;
+
/* Let firmware know the driver has taken over */
switch (adapter->hw.mac_type) {
case e1000_82571:
adapter->tx_queue_len = netdev->tx_queue_len;
- mod_timer(&adapter->watchdog_timer, jiffies);
-
#ifdef CONFIG_E1000_NAPI
netif_poll_enable(netdev);
#endif
e1000_irq_enable(adapter);
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
return 0;
}
static void e1000_power_down_phy(struct e1000_adapter *adapter)
{
- boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
- e1000_check_mng_mode(&adapter->hw);
- /* Power down the PHY so no link is implied when interface is down
- * The PHY cannot be powered down if any of the following is TRUE
+ /* Power down the PHY so no link is implied when interface is down *
+ * The PHY cannot be powered down if any of the following is TRUE *
* (a) WoL is enabled
* (b) AMT is active
* (c) SoL/IDER session is active */
if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.mac_type != e1000_ich8lan &&
- adapter->hw.media_type == e1000_media_type_copper &&
- !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
- !mng_mode_enabled &&
- !e1000_check_phy_reset_block(&adapter->hw)) {
+ adapter->hw.media_type == e1000_media_type_copper) {
uint16_t mii_reg = 0;
+
+ switch (adapter->hw.mac_type) {
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (E1000_READ_REG(&adapter->hw, MANC) &
+ E1000_MANC_SMBUS_EN)
+ goto out;
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_82573:
+ case e1000_80003es2lan:
+ case e1000_ich8lan:
+ if (e1000_check_mng_mode(&adapter->hw) ||
+ e1000_check_phy_reset_block(&adapter->hw))
+ goto out;
+ break;
+ default:
+ goto out;
+ }
e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
mdelay(1);
}
+out:
+ return;
}
void
{
struct net_device *netdev = adapter->netdev;
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__E1000_DOWN, &adapter->flags);
+
e1000_irq_disable(adapter);
del_timer_sync(&adapter->tx_fifo_stall_timer);
e1000_reset_hw(&adapter->hw);
if (adapter->hw.mac_type >= e1000_82544)
E1000_WRITE_REG(&adapter->hw, WUC, 0);
+
if (e1000_init_hw(&adapter->hw))
DPRINTK(PROBE, ERR, "Hardware Error\n");
e1000_update_mng_vlan(adapter);
phy_data);
}
- if (adapter->hw.mac_type < e1000_ich8lan)
- /* FIXME: this code is duplicate and wrong for PCI Express */
- if (adapter->en_mng_pt) {
+ if ((adapter->en_mng_pt) &&
+ (adapter->hw.mac_type >= e1000_82540) &&
+ (adapter->hw.mac_type < e1000_82571) &&
+ (adapter->hw.media_type == e1000_media_type_copper)) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
E1000_WRITE_REG(&adapter->hw, MANC, manc);
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = e1000_netpoll;
#endif
- strcpy(netdev->name, pci_name(pdev));
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
netdev->mem_start = mmio_start;
netdev->mem_end = mmio_start + mmio_len;
(adapter->hw.mac_type != e1000_82547))
netdev->features |= NETIF_F_TSO;
-#ifdef NETIF_F_TSO_IPV6
+#ifdef NETIF_F_TSO6
if (adapter->hw.mac_type > e1000_82547_rev_2)
- netdev->features |= NETIF_F_TSO_IPV6;
+ netdev->features |= NETIF_F_TSO6;
#endif
#endif
if (pci_using_dac)
adapter->phy_info_timer.function = &e1000_update_phy_info;
adapter->phy_info_timer.data = (unsigned long) adapter;
- INIT_WORK(&adapter->reset_task,
- (void (*)(void *))e1000_reset_task, netdev);
-
- /* we're going to reset, so assume we have no link for now */
-
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
+ INIT_WORK(&adapter->reset_task, e1000_reset_task);
e1000_check_options(adapter);
break;
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
/* if quad port adapter, disable WoL on all but port A */
if (global_quad_port_a != 0)
adapter->eeprom_wol = 0;
if ((err = register_netdev(netdev)))
goto err_register;
+ /* tell the stack to leave us alone until e1000_open() is called */
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+
DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
cards_found++;
flush_scheduled_work();
if (adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.mac_type != e1000_ich8lan &&
- adapter->hw.media_type == e1000_media_type_copper) {
+ adapter->hw.mac_type < e1000_82571 &&
+ adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
if (manc & E1000_MANC_SMBUS_EN) {
manc |= E1000_MANC_ARP_EN;
atomic_set(&adapter->irq_sem, 1);
spin_lock_init(&adapter->stats_lock);
+ set_bit(__E1000_DOWN, &adapter->flags);
+
return 0;
}
int err;
/* disallow open during test */
- if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags))
+ if (test_bit(__E1000_TESTING, &adapter->flags))
return -EBUSY;
/* allocate transmit descriptors */
-
if ((err = e1000_setup_all_tx_resources(adapter)))
goto err_setup_tx;
/* allocate receive descriptors */
-
if ((err = e1000_setup_all_rx_resources(adapter)))
goto err_setup_rx;
e1000_free_all_tx_resources(adapter);
e1000_free_all_rx_resources(adapter);
+ /* kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it) */
if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ !(adapter->vlgrp &&
+ adapter->vlgrp->vlan_devices[adapter->mng_vlan_id])) {
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
}
/* Program the Transmit Control Register */
tctl = E1000_READ_REG(hw, TCTL);
-
tctl &= ~E1000_TCTL_CT;
tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-#ifdef DISABLE_MULR
- /* disable Multiple Reads for debugging */
- tctl &= ~E1000_TCTL_MULR;
-#endif
-
if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
tarc = E1000_READ_REG(hw, TARC0);
- tarc |= ((1 << 25) | (1 << 21));
+ /* set the speed mode bit, we'll clear it if we're not at
+ * gigabit link later */
+ tarc |= (1 << 21);
E1000_WRITE_REG(hw, TARC0, tarc);
- tarc = E1000_READ_REG(hw, TARC1);
- tarc |= (1 << 25);
- if (tctl & E1000_TCTL_MULR)
- tarc &= ~(1 << 28);
- else
- tarc |= (1 << 28);
- E1000_WRITE_REG(hw, TARC1, tarc);
} else if (hw->mac_type == e1000_80003es2lan) {
tarc = E1000_READ_REG(hw, TARC0);
tarc |= 1;
e1000_config_collision_dist(hw);
/* Setup Transmit Descriptor Settings for eop descriptor */
- adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP |
- E1000_TXD_CMD_IFCS;
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+ /* only set IDE if we are delaying interrupts using the timers */
+ if (adapter->tx_int_delay)
+ adapter->txd_cmd |= E1000_TXD_CMD_IDE;
if (hw->mac_type < e1000_82543)
adapter->txd_cmd |= E1000_TXD_CMD_RPS;
* followed by the page buffers. Therefore, skb->data is
* sized to hold the largest protocol header.
*/
+ /* allocations using alloc_page take too long for regular MTU
+ * so only enable packet split for jumbo frames */
pages = PAGE_USE_COUNT(adapter->netdev->mtu);
- if ((adapter->hw.mac_type > e1000_82547_rev_2) && (pages <= 3) &&
- PAGE_SIZE <= 16384)
+ if ((adapter->hw.mac_type >= e1000_82571) && (pages <= 3) &&
+ PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
adapter->rx_ps_pages = pages;
else
adapter->rx_ps_pages = 0;
/* Configure extra packet-split registers */
rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
rfctl |= E1000_RFCTL_EXTEN;
- /* disable IPv6 packet split support */
- rfctl |= E1000_RFCTL_IPV6_DIS;
+ /* disable packet split support for IPv6 extension headers,
+ * because some malformed IPv6 headers can hang the RX */
+ rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
+ E1000_RFCTL_NEW_IPV6_EXT_DIS);
+
E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
rctl |= E1000_RCTL_DTYP_PS;
if (hw->mac_type >= e1000_82540) {
E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
- if (adapter->itr > 1)
+ if (adapter->itr_setting != 0)
E1000_WRITE_REG(hw, ITR,
1000000000 / (adapter->itr * 256));
}
/* Reset delay timers after every interrupt */
ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
#ifdef CONFIG_E1000_NAPI
- /* Auto-Mask interrupts upon ICR read. */
+ /* Auto-Mask interrupts upon ICR access */
ctrl_ext |= E1000_CTRL_EXT_IAME;
+ E1000_WRITE_REG(hw, IAM, 0xffffffff);
#endif
E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
- E1000_WRITE_REG(hw, IAM, ~0);
E1000_WRITE_FLUSH(hw);
}
E1000_WRITE_REG(hw, RXCSUM, rxcsum);
}
+ /* enable early receives on 82573, only takes effect if using > 2048
+ * byte total frame size. for example only for jumbo frames */
+#define E1000_ERT_2048 0x100
+ if (hw->mac_type == e1000_82573)
+ E1000_WRITE_REG(hw, ERT, E1000_ERT_2048);
+
/* Enable Receives */
E1000_WRITE_REG(hw, RCTL, rctl);
}
buffer_info->dma,
buffer_info->length,
PCI_DMA_TODEVICE);
+ buffer_info->dma = 0;
}
- if (buffer_info->skb)
+ if (buffer_info->skb) {
dev_kfree_skb_any(buffer_info->skb);
- memset(buffer_info, 0, sizeof(struct e1000_buffer));
+ buffer_info->skb = NULL;
+ }
+ /* buffer_info must be completely set up in the transmit path */
}
/**
DPRINTK(LINK, INFO,
"Gigabit has been disabled, downgrading speed\n");
}
+
if (adapter->hw.mac_type == e1000_82573) {
e1000_enable_tx_pkt_filtering(&adapter->hw);
if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
if ((adapter->hw.mac_type == e1000_82571 ||
adapter->hw.mac_type == e1000_82572) &&
txb2b == 0) {
-#define SPEED_MODE_BIT (1 << 21)
uint32_t tarc0;
tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
- tarc0 &= ~SPEED_MODE_BIT;
+ tarc0 &= ~(1 << 21);
E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
}
-
+
#ifdef NETIF_F_TSO
/* disable TSO for pcie and 10/100 speeds, to avoid
* some hardware issues */
DPRINTK(PROBE,INFO,
"10/100 speed: disabling TSO\n");
netdev->features &= ~NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
+ netdev->features &= ~NETIF_F_TSO6;
+#endif
break;
case SPEED_1000:
netdev->features |= NETIF_F_TSO;
+#ifdef NETIF_F_TSO6
+ netdev->features |= NETIF_F_TSO6;
+#endif
break;
default:
/* oops */
}
}
- /* Dynamic mode for Interrupt Throttle Rate (ITR) */
- if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) {
- /* Symmetric Tx/Rx gets a reduced ITR=2000; Total
- * asymmetrical Tx or Rx gets ITR=8000; everyone
- * else is between 2000-8000. */
- uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000;
- uint32_t dif = (adapter->gotcl > adapter->gorcl ?
- adapter->gotcl - adapter->gorcl :
- adapter->gorcl - adapter->gotcl) / 10000;
- uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
- E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256));
- }
-
/* Cause software interrupt to ensure rx ring is cleaned */
E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
}
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see e1000_param.c)
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ **/
+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
+ uint16_t itr_setting,
+ int packets,
+ int bytes)
+{
+ unsigned int retval = itr_setting;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ goto update_itr_done;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* jumbo frames get bulk treatment*/
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* jumbo frames need bulk latency setting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000)
+ retval = bulk_latency;
+ else if (packets <= 2 && bytes < 512)
+ retval = lowest_latency;
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ uint16_t current_itr;
+ uint32_t new_itr = adapter->itr;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ return;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (unlikely(adapter->link_speed != SPEED_1000)) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ adapter->tx_itr = e1000_update_itr(adapter,
+ adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = e1000_update_itr(adapter,
+ adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != adapter->itr) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ E1000_WRITE_REG(hw, ITR, 1000000000 / (new_itr * 256));
+ }
+
+ return;
+}
+
#define E1000_TX_FLAGS_CSUM 0x00000001
#define E1000_TX_FLAGS_VLAN 0x00000002
#define E1000_TX_FLAGS_TSO 0x00000004
0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb->h.raw - skb->data - 1;
-#ifdef NETIF_F_TSO_IPV6
+#ifdef NETIF_F_TSO6
} else if (skb->protocol == htons(ETH_P_IPV6)) {
skb->nh.ipv6h->payload_len = 0;
skb->h.th->check =
context_desc->cmd_and_length = cpu_to_le32(cmd_length);
buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
if (++i == tx_ring->count) i = 0;
tx_ring->next_to_use = i;
context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
context_desc->upper_setup.tcp_fields.tucss = css;
- context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
+ context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
context_desc->upper_setup.tcp_fields.tucse = 0;
context_desc->tcp_seg_setup.data = 0;
context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
if (unlikely(++i == tx_ring->count)) i = 0;
tx_ring->next_to_use = i;
size,
PCI_DMA_TODEVICE);
buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
len -= size;
offset += size;
size,
PCI_DMA_TODEVICE);
buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
len -= size;
offset += size;
tx_ring->next_to_use = i;
writel(i, adapter->hw.hw_addr + tx_ring->tdt);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
}
/**
return 0;
}
+static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(E1000_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int e1000_maybe_stop_tx(struct net_device *netdev,
+ struct e1000_tx_ring *tx_ring, int size)
+{
+ if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __e1000_maybe_stop_tx(netdev, size);
+}
+
#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
static int
e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int f;
len -= skb->data_len;
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
tx_ring = adapter->tx_ring;
if (unlikely(skb->len <= 0)) {
return NETDEV_TX_OK;
}
+ /* 82571 and newer doesn't need the workaround that limited descriptor
+ * length to 4kB */
+ if (adapter->hw.mac_type >= e1000_82571)
+ max_per_txd = 8192;
+
#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->gso_size;
/* The controller does a simple calculation to
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
- /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
- * points to just header, pull a few bytes of payload from
- * frags into skb->data */
+ /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
+ * points to just header, pull a few bytes of payload from
+ * frags into skb->data */
hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
switch (adapter->hw.mac_type) {
/* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time */
- if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 2)) {
- netif_stop_queue(netdev);
+ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) {
spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_BUSY;
}
if (unlikely(adapter->hw.mac_type == e1000_82547)) {
if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
netif_stop_queue(netdev);
- mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_BUSY;
}
netdev->trans_start = jiffies;
/* Make sure there is space in the ring for the next send. */
- if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 2))
- netif_stop_queue(netdev);
+ e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_OK;
}
static void
-e1000_reset_task(struct net_device *netdev)
+e1000_reset_task(struct work_struct *work)
{
- struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_adapter *adapter =
+ container_of(work, struct e1000_adapter, reset_task);
e1000_reinit_locked(adapter);
}
}
break;
case e1000_82573:
- /* only enable jumbo frames if ASPM is disabled completely
- * this means both bits must be zero in 0x1A bits 3:2 */
+ /* Jumbo Frames not supported if:
+ * - this is not an 82573L device
+ * - ASPM is enabled in any way (0x1A bits 3:2) */
e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1,
&eeprom_data);
- if (eeprom_data & EEPROM_WORD1A_ASPM_MASK) {
+ if ((adapter->hw.device_id != E1000_DEV_ID_82573L) ||
+ (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
DPRINTK(PROBE, ERR,
"Jumbo Frames not supported.\n");
}
break;
}
+ /* ERT will be enabled later to enable wire speed receives */
+
/* fall through to get support */
case e1000_82571:
case e1000_82572:
adapter->stats.roc += E1000_READ_REG(hw, ROC);
if (adapter->hw.mac_type != e1000_ich8lan) {
- adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
- adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
- adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
- adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
- adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
- adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+ adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
+ adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
+ adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
+ adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
+ adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
+ adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
}
adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
adapter->stats.tpr += E1000_READ_REG(hw, TPR);
if (adapter->hw.mac_type != e1000_ich8lan) {
- adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
- adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
- adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
- adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
- adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
- adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+ adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
+ adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
+ adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
+ adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
+ adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
+ adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
}
adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
if (adapter->hw.mac_type != e1000_ich8lan) {
- adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
- adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
- adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
- adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
- adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
- adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
- adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+ adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
+ adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
+ adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
+ adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
+ adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
+ adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
+ adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
}
}
/* Fill out the OS statistics structure */
-
adapter->net_stats.rx_packets = adapter->stats.gprc;
adapter->net_stats.tx_packets = adapter->stats.gptc;
adapter->net_stats.rx_bytes = adapter->stats.gorcl;
adapter->stats.crcerrs + adapter->stats.algnerrc +
adapter->stats.ruc + adapter->stats.roc +
adapter->stats.cexterr;
- adapter->net_stats.rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
+ adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
+ adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
/* Tx Errors */
-
- adapter->net_stats.tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
+ adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
+ adapter->net_stats.tx_errors = adapter->stats.txerrc;
adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
adapter->net_stats.tx_window_errors = adapter->stats.latecol;
adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+ if (adapter->hw.bad_tx_carr_stats_fd &&
+ adapter->link_duplex == FULL_DUPLEX) {
+ adapter->net_stats.tx_carrier_errors = 0;
+ adapter->stats.tncrs = 0;
+ }
/* Tx Dropped needs to be maintained elsewhere */
/* Phy Stats */
-
if (hw->media_type == e1000_media_type_copper) {
if ((adapter->link_speed == SPEED_1000) &&
(!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
+#ifdef CONFIG_PCI_MSI
+
+/**
+ * e1000_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static
+irqreturn_t e1000_intr_msi(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+#ifndef CONFIG_E1000_NAPI
+ int i;
+#endif
+
+ /* this code avoids the read of ICR but has to get 1000 interrupts
+ * at every link change event before it will notice the change */
+ if (++adapter->detect_link >= 1000) {
+ uint32_t icr = E1000_READ_REG(hw, ICR);
+#ifdef CONFIG_E1000_NAPI
+ /* read ICR disables interrupts using IAM, so keep up with our
+ * enable/disable accounting */
+ atomic_inc(&adapter->irq_sem);
+#endif
+ adapter->detect_link = 0;
+ if ((icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) &&
+ (icr & E1000_ICR_INT_ASSERTED)) {
+ hw->get_link_status = 1;
+ /* 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives here in the ISR and
+ * reset adapter in watchdog
+ */
+ if (netif_carrier_ok(netdev) &&
+ (adapter->hw.mac_type == e1000_80003es2lan)) {
+ /* disable receives */
+ uint32_t rctl = E1000_READ_REG(hw, RCTL);
+ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
+ }
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer,
+ jiffies + 1);
+ }
+ } else {
+ E1000_WRITE_REG(hw, ICR, (0xffffffff & ~(E1000_ICR_RXSEQ |
+ E1000_ICR_LSC)));
+ /* bummer we have to flush here, but things break otherwise as
+ * some event appears to be lost or delayed and throughput
+ * drops. In almost all tests this flush is un-necessary */
+ E1000_WRITE_FLUSH(hw);
+#ifdef CONFIG_E1000_NAPI
+ /* Interrupt Auto-Mask (IAM)...upon writing ICR, interrupts are
+ * masked. No need for the IMC write, but it does mean we
+ * should account for it ASAP. */
+ atomic_inc(&adapter->irq_sem);
+#endif
+ }
+
+#ifdef CONFIG_E1000_NAPI
+ if (likely(netif_rx_schedule_prep(netdev))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __netif_rx_schedule(netdev);
+ } else
+ e1000_irq_enable(adapter);
+#else
+ adapter->total_tx_bytes = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_packets = 0;
+
+ for (i = 0; i < E1000_MAX_INTR; i++)
+ if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
+ !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+ break;
+
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+#endif
+
+ return IRQ_HANDLED;
+}
+#endif
/**
* e1000_intr - Interrupt Handler
* @irq: interrupt number
* @data: pointer to a network interface device structure
- * @pt_regs: CPU registers structure
**/
static irqreturn_t
-e1000_intr(int irq, void *data, struct pt_regs *regs)
+e1000_intr(int irq, void *data)
{
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
#ifndef CONFIG_E1000_NAPI
int i;
-#else
+#endif
+ if (unlikely(!icr))
+ return IRQ_NONE; /* Not our interrupt */
+
+#ifdef CONFIG_E1000_NAPI
+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt */
+ if (unlikely(hw->mac_type >= e1000_82571 &&
+ !(icr & E1000_ICR_INT_ASSERTED)))
+ return IRQ_NONE;
+
/* Interrupt Auto-Mask...upon reading ICR,
* interrupts are masked. No need for the
* IMC write, but it does mean we should
atomic_inc(&adapter->irq_sem);
#endif
- if (unlikely(!icr)) {
-#ifdef CONFIG_E1000_NAPI
- if (hw->mac_type >= e1000_82571)
- e1000_irq_enable(adapter);
-#endif
- return IRQ_NONE; /* Not our interrupt */
- }
-
if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
hw->get_link_status = 1;
/* 80003ES2LAN workaround--
rctl = E1000_READ_REG(hw, RCTL);
E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
}
- mod_timer(&adapter->watchdog_timer, jiffies);
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
#ifdef CONFIG_E1000_NAPI
if (unlikely(hw->mac_type < e1000_82571)) {
+ /* disable interrupts, without the synchronize_irq bit */
atomic_inc(&adapter->irq_sem);
E1000_WRITE_REG(hw, IMC, ~0);
E1000_WRITE_FLUSH(hw);
}
- if (likely(netif_rx_schedule_prep(netdev)))
+ if (likely(netif_rx_schedule_prep(netdev))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
__netif_rx_schedule(netdev);
- else
+ } else
+ /* this really should not happen! if it does it is basically a
+ * bug, but not a hard error, so enable ints and continue */
e1000_irq_enable(adapter);
#else
/* Writing IMC and IMS is needed for 82547.
E1000_WRITE_REG(hw, IMC, ~0);
}
+ adapter->total_tx_bytes = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_packets = 0;
+
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
!e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+
if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
e1000_irq_enable(adapter);
#endif
-
return IRQ_HANDLED;
}
if ((!tx_cleaned && (work_done == 0)) ||
!netif_running(poll_dev)) {
quit_polling:
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
netif_rx_complete(poll_dev);
e1000_irq_enable(adapter);
return 0;
unsigned int count = 0;
#endif
boolean_t cleaned = FALSE;
+ unsigned int total_tx_bytes=0, total_tx_packets=0;
i = tx_ring->next_to_clean;
eop = tx_ring->buffer_info[i].next_to_watch;
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
+ if (cleaned) {
+ struct sk_buff *skb = buffer_info->skb;
+ unsigned int segs = skb_shinfo(skb)->gso_segs;
+ total_tx_packets += segs;
+ total_tx_packets++;
+ total_tx_bytes += skb->len;
+ }
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
- memset(tx_desc, 0, sizeof(struct e1000_tx_desc));
+ tx_desc->upper.data = 0;
if (unlikely(++i == tx_ring->count)) i = 0;
}
-
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
#ifdef CONFIG_E1000_NAPI
tx_ring->next_to_clean = i;
#define TX_WAKE_THRESHOLD 32
- if (unlikely(cleaned && netif_queue_stopped(netdev) &&
- netif_carrier_ok(netdev))) {
- spin_lock(&tx_ring->tx_lock);
- if (netif_queue_stopped(netdev) &&
- (E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))
+ if (unlikely(cleaned && netif_carrier_ok(netdev) &&
+ E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (netif_queue_stopped(netdev)) {
netif_wake_queue(netdev);
- spin_unlock(&tx_ring->tx_lock);
+ ++adapter->restart_queue;
+ }
}
if (adapter->detect_tx_hung) {
netif_stop_queue(netdev);
}
}
+ adapter->total_tx_bytes += total_tx_bytes;
+ adapter->total_tx_packets += total_tx_packets;
return cleaned;
}
unsigned int i;
int cleaned_count = 0;
boolean_t cleaned = FALSE;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
while (rx_desc->status & E1000_RXD_STAT_DD) {
struct sk_buff *skb;
u8 status;
+
#ifdef CONFIG_E1000_NAPI
if (*work_done >= work_to_do)
break;
length = le16_to_cpu(rx_desc->length);
- /* adjust length to remove Ethernet CRC */
- length -= 4;
-
if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
}
}
+ /* adjust length to remove Ethernet CRC, this must be
+ * done after the TBI_ACCEPT workaround above */
+ length -= 4;
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += length;
+ total_rx_packets++;
+
/* code added for copybreak, this should improve
* performance for small packets with large amounts
* of reassembly being done in the stack */
/* save the skb in buffer_info as good */
buffer_info->skb = skb;
skb = new_skb;
- skb_put(skb, length);
}
- } else
- skb_put(skb, length);
-
+ /* else just continue with the old one */
+ }
/* end copybreak code */
+ skb_put(skb, length);
/* Receive Checksum Offload */
e1000_rx_checksum(adapter,
if (cleaned_count)
adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
return cleaned;
}
uint32_t length, staterr;
int cleaned_count = 0;
boolean_t cleaned = FALSE;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
goto copydone;
} /* if */
}
-
+
for (j = 0; j < adapter->rx_ps_pages; j++) {
if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
break;
pskb_trim(skb, skb->len - 4);
copydone:
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
e1000_rx_checksum(adapter, staterr,
le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
skb->protocol = eth_type_trans(skb, netdev);
if (cleaned_count)
adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
return cleaned;
}
}
skb = netdev_alloc_skb(netdev,
- adapter->rx_ps_bsize0 + NET_IP_ALIGN);
+ adapter->rx_ps_bsize0 + NET_IP_ALIGN);
if (unlikely(!skb)) {
adapter->alloc_rx_buff_failed++;
pci_write_config_word(adapter->pdev, reg, *value);
}
-#if 0
-uint32_t
-e1000_io_read(struct e1000_hw *hw, unsigned long port)
+int32_t
+e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
{
- return inl(port);
+ struct e1000_adapter *adapter = hw->back;
+ uint16_t cap_offset;
+
+ cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+ return E1000_SUCCESS;
}
-#endif /* 0 */
void
e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
if (adapter->hw.mac_type != e1000_ich8lan) {
- /* enable VLAN receive filtering */
- rctl = E1000_READ_REG(&adapter->hw, RCTL);
- rctl |= E1000_RCTL_VFE;
- rctl &= ~E1000_RCTL_CFIEN;
- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- e1000_update_mng_vlan(adapter);
+ /* enable VLAN receive filtering */
+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ rctl |= E1000_RCTL_VFE;
+ rctl &= ~E1000_RCTL_CFIEN;
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
}
} else {
/* disable VLAN tag insert/strip */
E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
if (adapter->hw.mac_type != e1000_ich8lan) {
- /* disable VLAN filtering */
- rctl = E1000_READ_REG(&adapter->hw, RCTL);
- rctl &= ~E1000_RCTL_VFE;
- E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
- if (adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) {
- e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- }
+ /* disable VLAN filtering */
+ rctl = E1000_READ_REG(&adapter->hw, RCTL);
+ rctl &= ~E1000_RCTL_VFE;
+ E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+ if (adapter->mng_vlan_id !=
+ (uint16_t)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev,
+ adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
}
}
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- /* FIXME: this code is incorrect for PCI Express */
if (adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.mac_type != e1000_ich8lan &&
- adapter->hw.media_type == e1000_media_type_copper) {
+ adapter->hw.mac_type < e1000_82571 &&
+ adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
if (manc & E1000_MANC_SMBUS_EN) {
manc |= E1000_MANC_ARP_EN;
if (adapter->hw.phy_type == e1000_phy_igp_3)
e1000_phy_powerdown_workaround(&adapter->hw);
+ if (netif_running(netdev))
+ e1000_free_irq(adapter);
+
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
e1000_release_hw_control(adapter);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
+ if (netif_running(netdev) && (err = e1000_request_irq(adapter)))
+ return err;
+
+ e1000_power_up_phy(adapter);
e1000_reset(adapter);
E1000_WRITE_REG(&adapter->hw, WUS, ~0);
netif_device_attach(netdev);
- /* FIXME: this code is incorrect for PCI Express */
if (adapter->hw.mac_type >= e1000_82540 &&
- adapter->hw.mac_type != e1000_ich8lan &&
- adapter->hw.media_type == e1000_media_type_copper) {
+ adapter->hw.mac_type < e1000_82571 &&
+ adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc &= ~(E1000_MANC_ARP_EN);
E1000_WRITE_REG(&adapter->hw, MANC, manc);
struct e1000_adapter *adapter = netdev_priv(netdev);
disable_irq(adapter->pdev->irq);
- e1000_intr(adapter->pdev->irq, netdev, NULL);
+ e1000_intr(adapter->pdev->irq, netdev);
e1000_clean_tx_irq(adapter, adapter->tx_ring);
#ifndef CONFIG_E1000_NAPI
adapter->clean_rx(adapter, adapter->rx_ring);
}
pci_set_master(pdev);
- pci_enable_wake(pdev, 3, 0);
- pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */
-
- /* Perform card reset only on one instance of the card */
- if (PCI_FUNC (pdev->devfn) != 0)
- return PCI_ERS_RESULT_RECOVERED;
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
e1000_reset(adapter);
E1000_WRITE_REG(&adapter->hw, WUS, ~0);
netif_device_attach(netdev);
if (adapter->hw.mac_type >= e1000_82540 &&
+ adapter->hw.mac_type < e1000_82571 &&
adapter->hw.media_type == e1000_media_type_copper) {
manc = E1000_READ_REG(&adapter->hw, MANC);
manc &= ~(E1000_MANC_ARP_EN);
projects / mirror_ubuntu-artful-kernel.git / blobdiff