* The skb's priority is determined via the VLAN Tag Priority Code
* Point field.
*/
- if (cxgb4_dcb_enabled(dev)) {
+ if (cxgb4_dcb_enabled(dev) && !is_kdump_kernel()) {
u16 vlan_tci;
int err;
* This is equivalent to 4 TIDs. With CLIP enabled it
* needs 2 TIDs.
*/
- if (family == PF_INET)
- t->stids_in_use++;
- else
+ if (family == PF_INET6) {
t->stids_in_use += 2;
+ t->v6_stids_in_use += 2;
+ } else {
+ t->stids_in_use++;
+ }
}
spin_unlock_bh(&t->stid_lock);
return stid;
bitmap_release_region(t->stid_bmap, stid, 1);
t->stid_tab[stid].data = NULL;
if (stid < t->nstids) {
- if (family == PF_INET)
- t->stids_in_use--;
- else
+ if (family == PF_INET6) {
t->stids_in_use -= 2;
+ t->v6_stids_in_use -= 2;
+ } else {
+ t->stids_in_use--;
+ }
} else {
t->sftids_in_use--;
}
+
spin_unlock_bh(&t->stid_lock);
}
EXPORT_SYMBOL(cxgb4_free_stid);
* Release a TID and inform HW. If we are unable to allocate the release
* message we defer to a work queue.
*/
-void cxgb4_remove_tid(struct tid_info *t, unsigned int chan, unsigned int tid)
+void cxgb4_remove_tid(struct tid_info *t, unsigned int chan, unsigned int tid,
+ unsigned short family)
{
struct sk_buff *skb;
struct adapter *adap = container_of(t, struct adapter, tids);
if (t->tid_tab[tid]) {
t->tid_tab[tid] = NULL;
- if (t->hash_base && (tid >= t->hash_base))
- atomic_dec(&t->hash_tids_in_use);
- else
- atomic_dec(&t->tids_in_use);
+ atomic_dec(&t->conns_in_use);
+ if (t->hash_base && (tid >= t->hash_base)) {
+ if (family == AF_INET6)
+ atomic_sub(2, &t->hash_tids_in_use);
+ else
+ atomic_dec(&t->hash_tids_in_use);
+ } else {
+ if (family == AF_INET6)
+ atomic_sub(2, &t->tids_in_use);
+ else
+ atomic_dec(&t->tids_in_use);
+ }
}
skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC);
spin_lock_init(&t->ftid_lock);
t->stids_in_use = 0;
+ t->v6_stids_in_use = 0;
t->sftids_in_use = 0;
t->afree = NULL;
t->atids_in_use = 0;
atomic_set(&t->tids_in_use, 0);
+ atomic_set(&t->conns_in_use, 0);
atomic_set(&t->hash_tids_in_use, 0);
/* Setup the free list for atid_tab and clear the stid bitmap. */
if (err)
goto irq_err;
}
+
+ mutex_lock(&uld_mutex);
enable_rx(adap);
t4_sge_start(adap);
t4_intr_enable(adap);
adap->flags |= FULL_INIT_DONE;
+ mutex_unlock(&uld_mutex);
+
notify_ulds(adap, CXGB4_STATE_UP);
#if IS_ENABLED(CONFIG_IPV6)
update_clip(adap);
return err;
}
+ /* It's possible that the basic port information could have
+ * changed since we first read it.
+ */
+ err = t4_update_port_info(pi);
+ if (err < 0)
+ return err;
+
err = link_start(dev);
if (!err)
netif_tx_start_all_queues(dev);
if (vf >= adap->num_vfs)
return -EINVAL;
ivi->vf = vf;
+ ivi->max_tx_rate = adap->vfinfo[vf].tx_rate;
+ ivi->min_tx_rate = 0;
ether_addr_copy(ivi->mac, adap->vfinfo[vf].vf_mac_addr);
return 0;
}
return 0;
}
+static int cxgb_set_vf_rate(struct net_device *dev, int vf, int min_tx_rate,
+ int max_tx_rate)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+ struct fw_port_cmd port_cmd, port_rpl;
+ u32 link_status, speed = 0;
+ u32 fw_pfvf, fw_class;
+ int class_id = vf;
+ int link_ok, ret;
+ u16 pktsize;
+
+ if (vf >= adap->num_vfs)
+ return -EINVAL;
+
+ if (min_tx_rate) {
+ dev_err(adap->pdev_dev,
+ "Min tx rate (%d) (> 0) for VF %d is Invalid.\n",
+ min_tx_rate, vf);
+ return -EINVAL;
+ }
+ /* Retrieve link details for VF port */
+ memset(&port_cmd, 0, sizeof(port_cmd));
+ port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
+ FW_CMD_REQUEST_F |
+ FW_CMD_READ_F |
+ FW_PORT_CMD_PORTID_V(pi->port_id));
+ port_cmd.action_to_len16 =
+ cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO) |
+ FW_LEN16(port_cmd));
+ ret = t4_wr_mbox(adap, adap->mbox, &port_cmd, sizeof(port_cmd),
+ &port_rpl);
+ if (ret != FW_SUCCESS) {
+ dev_err(adap->pdev_dev,
+ "Failed to get link status for VF %d\n", vf);
+ return -EINVAL;
+ }
+ link_status = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype);
+ link_ok = (link_status & FW_PORT_CMD_LSTATUS_F) != 0;
+ if (!link_ok) {
+ dev_err(adap->pdev_dev, "Link down for VF %d\n", vf);
+ return -EINVAL;
+ }
+ /* Determine link speed */
+ if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
+ speed = 100;
+ else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
+ speed = 1000;
+ else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
+ speed = 10000;
+ else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
+ speed = 25000;
+ else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
+ speed = 40000;
+ else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
+ speed = 100000;
+
+ if (max_tx_rate > speed) {
+ dev_err(adap->pdev_dev,
+ "Max tx rate %d for VF %d can't be > link-speed %u",
+ max_tx_rate, vf, speed);
+ return -EINVAL;
+ }
+ pktsize = be16_to_cpu(port_rpl.u.info.mtu);
+ /* subtract ethhdr size and 4 bytes crc since, f/w appends it */
+ pktsize = pktsize - sizeof(struct ethhdr) - 4;
+ /* subtract ipv4 hdr size, tcp hdr size to get typical IPv4 MSS size */
+ pktsize = pktsize - sizeof(struct iphdr) - sizeof(struct tcphdr);
+ /* configure Traffic Class for rate-limiting */
+ ret = t4_sched_params(adap, SCHED_CLASS_TYPE_PACKET,
+ SCHED_CLASS_LEVEL_CL_RL,
+ SCHED_CLASS_MODE_CLASS,
+ SCHED_CLASS_RATEUNIT_BITS,
+ SCHED_CLASS_RATEMODE_ABS,
+ pi->port_id, class_id, 0,
+ max_tx_rate * 1000, 0, pktsize);
+ if (ret) {
+ dev_err(adap->pdev_dev, "Err %d for Traffic Class config\n",
+ ret);
+ return -EINVAL;
+ }
+ dev_info(adap->pdev_dev,
+ "Class %d with MSS %u configured with rate %u\n",
+ class_id, pktsize, max_tx_rate);
+
+ /* bind VF to configured Traffic Class */
+ fw_pfvf = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_SCHEDCLASS_ETH));
+ fw_class = class_id;
+ ret = t4_set_params(adap, adap->mbox, adap->pf, vf + 1, 1, &fw_pfvf,
+ &fw_class);
+ if (ret) {
+ dev_err(adap->pdev_dev,
+ "Err %d in binding VF %d to Traffic Class %d\n",
+ ret, vf, class_id);
+ return -EINVAL;
+ }
+ dev_info(adap->pdev_dev, "PF %d VF %d is bound to Class %d\n",
+ adap->pf, vf, class_id);
+ adap->vfinfo[vf].tx_rate = max_tx_rate;
+ return 0;
+}
+
#endif
static int cxgb_set_mac_addr(struct net_device *dev, void *p)
return err;
}
-static int cxgb_setup_tc(struct net_device *dev, u32 handle, __be16 proto,
- struct tc_to_netdev *tc)
+static int cxgb_setup_tc(struct net_device *dev, u32 handle, u32 chain_index,
+ __be16 proto, struct tc_to_netdev *tc)
{
struct port_info *pi = netdev2pinfo(dev);
struct adapter *adap = netdev2adap(dev);
+ if (chain_index)
+ return -EOPNOTSUPP;
+
if (!(adap->flags & FULL_INIT_DONE)) {
dev_err(adap->pdev_dev,
"Failed to setup tc on port %d. Link Down?\n",
return -EOPNOTSUPP;
}
+static netdev_features_t cxgb_fix_features(struct net_device *dev,
+ netdev_features_t features)
+{
+ /* Disable GRO, if RX_CSUM is disabled */
+ if (!(features & NETIF_F_RXCSUM))
+ features &= ~NETIF_F_GRO;
+
+ return features;
+}
+
static const struct net_device_ops cxgb4_netdev_ops = {
.ndo_open = cxgb_open,
.ndo_stop = cxgb_close,
#endif /* CONFIG_CHELSIO_T4_FCOE */
.ndo_set_tx_maxrate = cxgb_set_tx_maxrate,
.ndo_setup_tc = cxgb_setup_tc,
+ .ndo_fix_features = cxgb_fix_features,
};
#ifdef CONFIG_PCI_IOV
.ndo_open = dummy_open,
.ndo_set_vf_mac = cxgb_set_vf_mac,
.ndo_get_vf_config = cxgb_get_vf_config,
+ .ndo_set_vf_rate = cxgb_set_vf_rate,
.ndo_get_phys_port_id = cxgb_get_phys_port_id,
};
#endif
{
int port;
+ if (pci_channel_offline(adap->pdev))
+ return;
+
/* Disable the SGE since ULDs are going to free resources that
* could be exposed to the adapter. RDMA MWs for example...
*/
spin_lock(&adap->stats_lock);
for_each_port(adap, i) {
struct net_device *dev = adap->port[i];
-
- netif_device_detach(dev);
- netif_carrier_off(dev);
+ if (dev) {
+ netif_device_detach(dev);
+ netif_carrier_off(dev);
+ }
}
spin_unlock(&adap->stats_lock);
disable_interrupts(adap);
rtnl_lock();
for_each_port(adap, i) {
struct net_device *dev = adap->port[i];
-
- if (netif_running(dev)) {
- link_start(dev);
- cxgb_set_rxmode(dev);
+ if (dev) {
+ if (netif_running(dev)) {
+ link_start(dev);
+ cxgb_set_rxmode(dev);
+ }
+ netif_device_attach(dev);
}
- netif_device_attach(dev);
}
rtnl_unlock();
}
/* Reduce memory usage in kdump environment, disable all offload.
*/
- if (is_kdump_kernel()) {
- adap->params.offload = 0;
- adap->params.crypto = 0;
- } else if (is_uld(adap) && t4_uld_mem_alloc(adap)) {
+ if (is_kdump_kernel() || (is_uld(adap) && t4_uld_mem_alloc(adap))) {
adap->params.offload = 0;
adap->params.crypto = 0;
}
struct port_info *pi = adap2pinfo(adap, i);
pi->first_qset = qidx;
- pi->nqsets = 8;
+ pi->nqsets = is_kdump_kernel() ? 1 : 8;
qidx += pi->nqsets;
}
#else /* !CONFIG_CHELSIO_T4_DCB */
if (q10g > netif_get_num_default_rss_queues())
q10g = netif_get_num_default_rss_queues();
+ if (is_kdump_kernel())
+ q10g = 1;
+
for_each_port(adap, i) {
struct port_info *pi = adap2pinfo(adap, i);
netif_set_real_num_tx_queues(adapter->port[i], pi->nqsets);
netif_set_real_num_rx_queues(adapter->port[i], pi->nqsets);
+ netif_carrier_off(adapter->port[i]);
+
err = register_netdev(adapter->port[i]);
if (err)
break;