if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE))
return FM10K_ERR_DMA_PENDING;
+ /* verify the switch is ready for reset */
+ reg = fm10k_read_reg(hw, FM10K_DMA_CTRL2);
+ if (!(reg & FM10K_DMA_CTRL2_SWITCH_READY))
+ goto out;
+
/* Inititate data path reset */
reg |= FM10K_DMA_CTRL_DATAPATH_RESET;
fm10k_write_reg(hw, FM10K_DMA_CTRL, reg);
if (!(reg & FM10K_IP_NOTINRESET))
err = FM10K_ERR_RESET_FAILED;
+out:
return err;
}
return 0;
}
-/**
- * fm10k_is_slot_appropriate_pf - Indicate appropriate slot for this SKU
- * @hw: pointer to hardware structure
- *
- * Looks at the PCIe bus info to confirm whether or not this slot can support
- * the necessary bandwidth for this device.
- **/
-static bool fm10k_is_slot_appropriate_pf(struct fm10k_hw *hw)
-{
- return (hw->bus.speed == hw->bus_caps.speed) &&
- (hw->bus.width == hw->bus_caps.width);
-}
-
/**
* fm10k_update_vlan_pf - Update status of VLAN ID in VLAN filter table
* @hw: pointer to hardware structure
.init_hw = &fm10k_init_hw_pf,
.start_hw = &fm10k_start_hw_generic,
.stop_hw = &fm10k_stop_hw_generic,
- .is_slot_appropriate = &fm10k_is_slot_appropriate_pf,
.update_vlan = &fm10k_update_vlan_pf,
.read_mac_addr = &fm10k_read_mac_addr_pf,
.update_uc_addr = &fm10k_update_uc_addr_pf,