},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
},
.base_ext1 = {
.ant_div_control = 0,
- .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+ .future = {0, 0, 0},
+ .tempslopextension = {0, 0, 0, 0, 0, 0, 0, 0}
},
.calFreqPier2G = {
FREQ2FBIN(2412, 1),
if (AR_SREV_9485(ah) || AR_SREV_9330(ah) || AR_SREV_9340(ah))
REG_RMW_FIELD(ah, AR_CH0_TOP2, AR_CH0_TOP2_XPABIASLVL, bias);
- else if (AR_SREV_9462(ah) || AR_SREV_9550(ah))
+ else if (AR_SREV_9462(ah) || AR_SREV_9550(ah) || AR_SREV_9565(ah))
REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);
else {
REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);
u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
- if (AR_SREV_9462(ah)) {
+ if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
AR_SWITCH_TABLE_COM_AR9462_ALL, value);
} else if (AR_SREV_9550(ah)) {
}
}
- if (AR_SREV_9330(ah) || AR_SREV_9485(ah)) {
+ if (AR_SREV_9330(ah) || AR_SREV_9485(ah) || AR_SREV_9565(ah)) {
value = ath9k_hw_ar9300_get_eeprom(ah, EEP_ANT_DIV_CTL1);
/*
* main_lnaconf, alt_lnaconf, main_tb, alt_tb
regval &= (~AR_ANT_DIV_CTRL_ALL);
regval |= (value & 0x3f) << AR_ANT_DIV_CTRL_ALL_S;
/* enable_lnadiv */
- regval &= (~AR_PHY_9485_ANT_DIV_LNADIV);
- regval |= ((value >> 6) & 0x1) <<
- AR_PHY_9485_ANT_DIV_LNADIV_S;
+ regval &= (~AR_PHY_ANT_DIV_LNADIV);
+ regval |= ((value >> 6) & 0x1) << AR_PHY_ANT_DIV_LNADIV_S;
REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
/*enable fast_div */
regval = REG_READ(ah, AR_PHY_CCK_DETECT);
regval &= (~AR_FAST_DIV_ENABLE);
- regval |= ((value >> 7) & 0x1) <<
- AR_FAST_DIV_ENABLE_S;
+ regval |= ((value >> 7) & 0x1) << AR_FAST_DIV_ENABLE_S;
REG_WRITE(ah, AR_PHY_CCK_DETECT, regval);
- ant_div_ctl1 =
- ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1);
+ ant_div_ctl1 = ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1);
/* check whether antenna diversity is enabled */
if ((ant_div_ctl1 >> 0x6) == 0x3) {
regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
* clear bits 25-30 main_lnaconf, alt_lnaconf,
* main_tb, alt_tb
*/
- regval &= (~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF |
- AR_PHY_9485_ANT_DIV_ALT_LNACONF |
- AR_PHY_9485_ANT_DIV_ALT_GAINTB |
- AR_PHY_9485_ANT_DIV_MAIN_GAINTB));
+ regval &= (~(AR_PHY_ANT_DIV_MAIN_LNACONF |
+ AR_PHY_ANT_DIV_ALT_LNACONF |
+ AR_PHY_ANT_DIV_ALT_GAINTB |
+ AR_PHY_ANT_DIV_MAIN_GAINTB));
/* by default use LNA1 for the main antenna */
- regval |= (AR_PHY_9485_ANT_DIV_LNA1 <<
- AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S);
- regval |= (AR_PHY_9485_ANT_DIV_LNA2 <<
- AR_PHY_9485_ANT_DIV_ALT_LNACONF_S);
+ regval |= (AR_PHY_ANT_DIV_LNA1 <<
+ AR_PHY_ANT_DIV_MAIN_LNACONF_S);
+ regval |= (AR_PHY_ANT_DIV_LNA2 <<
+ AR_PHY_ANT_DIV_ALT_LNACONF_S);
REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
}
REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set);
if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set))
return;
- } else if (AR_SREV_9462(ah)) {
+ } else if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
reg_val = le32_to_cpu(pBase->swreg);
REG_WRITE(ah, AR_PHY_PMU1, reg_val);
} else {
while (!REG_READ_FIELD(ah, AR_PHY_PMU2,
AR_PHY_PMU2_PGM))
udelay(10);
- } else if (AR_SREV_9462(ah))
+ } else if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
REG_RMW_FIELD(ah, AR_PHY_PMU1, AR_PHY_PMU1_PWD, 0x1);
else {
reg_val = REG_READ(ah, AR_RTC_SLEEP_CLK) |
bias & 0x3);
}
+static int ar9003_hw_get_thermometer(struct ath_hw *ah)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader;
+ int thermometer = (pBase->miscConfiguration >> 1) & 0x3;
+
+ return --thermometer;
+}
+
+static void ar9003_hw_thermometer_apply(struct ath_hw *ah)
+{
+ int thermometer = ar9003_hw_get_thermometer(ah);
+ u8 therm_on = (thermometer < 0) ? 0 : 1;
+
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_RXTX4,
+ AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on);
+ if (ah->caps.tx_chainmask & BIT(1))
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH1_RXTX4,
+ AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on);
+ if (ah->caps.tx_chainmask & BIT(2))
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4,
+ AR_PHY_65NM_CH0_RXTX4_THERM_ON_OVR, therm_on);
+
+ therm_on = (thermometer < 0) ? 0 : (thermometer == 0);
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_RXTX4,
+ AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on);
+ if (ah->caps.tx_chainmask & BIT(1)) {
+ therm_on = (thermometer < 0) ? 0 : (thermometer == 1);
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH1_RXTX4,
+ AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on);
+ }
+ if (ah->caps.tx_chainmask & BIT(2)) {
+ therm_on = (thermometer < 0) ? 0 : (thermometer == 2);
+ REG_RMW_FIELD(ah, AR_PHY_65NM_CH2_RXTX4,
+ AR_PHY_65NM_CH0_RXTX4_THERM_ON, therm_on);
+ }
+}
+
+static void ar9003_hw_thermo_cal_apply(struct ath_hw *ah)
+{
+ u32 data, ko, kg;
+
+ if (!AR_SREV_9462_20(ah))
+ return;
+ ar9300_otp_read_word(ah, 1, &data);
+ ko = data & 0xff;
+ kg = (data >> 8) & 0xff;
+ if (ko || kg) {
+ REG_RMW_FIELD(ah, AR_PHY_BB_THERM_ADC_3,
+ AR_PHY_BB_THERM_ADC_3_THERM_ADC_OFFSET, ko);
+ REG_RMW_FIELD(ah, AR_PHY_BB_THERM_ADC_3,
+ AR_PHY_BB_THERM_ADC_3_THERM_ADC_SCALE_GAIN,
+ kg + 256);
+ }
+}
+
static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
struct ath9k_channel *chan)
{
ar9003_hw_internal_regulator_apply(ah);
ar9003_hw_apply_tuning_caps(ah);
ar9003_hw_txend_to_xpa_off_apply(ah, is2ghz);
+ ar9003_hw_thermometer_apply(ah);
+ ar9003_hw_thermo_cal_apply(ah);
}
static void ath9k_hw_ar9300_set_addac(struct ath_hw *ah,
{
int tempSlope = 0;
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
- int f[3], t[3];
+ int f[8], t[8], i;
REG_RMW(ah, AR_PHY_TPC_11_B0,
(correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
*/
if (frequency < 4000)
tempSlope = eep->modalHeader2G.tempSlope;
- else if (eep->base_ext2.tempSlopeLow != 0) {
+ else if ((eep->baseEepHeader.miscConfiguration & 0x20) != 0) {
+ for (i = 0; i < 8; i++) {
+ t[i] = eep->base_ext1.tempslopextension[i];
+ f[i] = FBIN2FREQ(eep->calFreqPier5G[i], 0);
+ }
+ tempSlope = ar9003_hw_power_interpolate((s32) frequency,
+ f, t, 8);
+ } else if (eep->base_ext2.tempSlopeLow != 0) {
t[0] = eep->base_ext2.tempSlopeLow;
f[0] = 5180;
t[1] = eep->modalHeader5G.tempSlope;
i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i],
chan->channel);
- /*
- * compare test group from regulatory
- * channel list with test mode from pCtlMode
- * list
- */
- if ((((cfgCtl & ~CTL_MODE_M) |
- (pCtlMode[ctlMode] & CTL_MODE_M)) ==
- ctlIndex[i]) ||
- (((cfgCtl & ~CTL_MODE_M) |
- (pCtlMode[ctlMode] & CTL_MODE_M)) ==
- ((ctlIndex[i] & CTL_MODE_M) |
- SD_NO_CTL))) {
- twiceMinEdgePower =
- ar9003_hw_get_max_edge_power(pEepData,
- freq, i,
- is2ghz);
-
- if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL)
- /*
- * Find the minimum of all CTL
- * edge powers that apply to
- * this channel
- */
- twiceMaxEdgePower =
- min(twiceMaxEdgePower,
- twiceMinEdgePower);
- else {
- /* specific */
- twiceMaxEdgePower =
- twiceMinEdgePower;
- break;
- }
+ /*
+ * compare test group from regulatory
+ * channel list with test mode from pCtlMode
+ * list
+ */
+ if ((((cfgCtl & ~CTL_MODE_M) |
+ (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+ ctlIndex[i]) ||
+ (((cfgCtl & ~CTL_MODE_M) |
+ (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+ ((ctlIndex[i] & CTL_MODE_M) |
+ SD_NO_CTL))) {
+ twiceMinEdgePower =
+ ar9003_hw_get_max_edge_power(pEepData,
+ freq, i,
+ is2ghz);
+
+ if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL)
+ /*
+ * Find the minimum of all CTL
+ * edge powers that apply to
+ * this channel
+ */
+ twiceMaxEdgePower =
+ min(twiceMaxEdgePower,
+ twiceMinEdgePower);
+ else {
+ /* specific */
+ twiceMaxEdgePower = twiceMinEdgePower;
+ break;
}
}
+ }
- minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
+ minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
- ath_dbg(common, REGULATORY,
- "SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d sP %d minCtlPwr %d\n",
- ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
- scaledPower, minCtlPower);
-
- /* Apply ctl mode to correct target power set */
- switch (pCtlMode[ctlMode]) {
- case CTL_11B:
- for (i = ALL_TARGET_LEGACY_1L_5L;
- i <= ALL_TARGET_LEGACY_11S; i++)
- pPwrArray[i] =
- (u8)min((u16)pPwrArray[i],
- minCtlPower);
- break;
- case CTL_11A:
- case CTL_11G:
- for (i = ALL_TARGET_LEGACY_6_24;
- i <= ALL_TARGET_LEGACY_54; i++)
- pPwrArray[i] =
- (u8)min((u16)pPwrArray[i],
- minCtlPower);
- break;
- case CTL_5GHT20:
- case CTL_2GHT20:
- for (i = ALL_TARGET_HT20_0_8_16;
- i <= ALL_TARGET_HT20_21; i++)
- pPwrArray[i] =
- (u8)min((u16)pPwrArray[i],
- minCtlPower);
- pPwrArray[ALL_TARGET_HT20_22] =
- (u8)min((u16)pPwrArray[ALL_TARGET_HT20_22],
- minCtlPower);
- pPwrArray[ALL_TARGET_HT20_23] =
- (u8)min((u16)pPwrArray[ALL_TARGET_HT20_23],
- minCtlPower);
- break;
- case CTL_5GHT40:
- case CTL_2GHT40:
- for (i = ALL_TARGET_HT40_0_8_16;
- i <= ALL_TARGET_HT40_23; i++)
- pPwrArray[i] =
- (u8)min((u16)pPwrArray[i],
- minCtlPower);
- break;
- default:
- break;
- }
+ ath_dbg(common, REGULATORY,
+ "SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d sP %d minCtlPwr %d\n",
+ ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
+ scaledPower, minCtlPower);
+
+ /* Apply ctl mode to correct target power set */
+ switch (pCtlMode[ctlMode]) {
+ case CTL_11B:
+ for (i = ALL_TARGET_LEGACY_1L_5L;
+ i <= ALL_TARGET_LEGACY_11S; i++)
+ pPwrArray[i] = (u8)min((u16)pPwrArray[i],
+ minCtlPower);
+ break;
+ case CTL_11A:
+ case CTL_11G:
+ for (i = ALL_TARGET_LEGACY_6_24;
+ i <= ALL_TARGET_LEGACY_54; i++)
+ pPwrArray[i] = (u8)min((u16)pPwrArray[i],
+ minCtlPower);
+ break;
+ case CTL_5GHT20:
+ case CTL_2GHT20:
+ for (i = ALL_TARGET_HT20_0_8_16;
+ i <= ALL_TARGET_HT20_23; i++)
+ pPwrArray[i] = (u8)min((u16)pPwrArray[i],
+ minCtlPower);
+ break;
+ case CTL_5GHT40:
+ case CTL_2GHT40:
+ for (i = ALL_TARGET_HT40_0_8_16;
+ i <= ALL_TARGET_HT40_23; i++)
+ pPwrArray[i] = (u8)min((u16)pPwrArray[i],
+ minCtlPower);
+ break;
+ default:
+ break;
+ }
} /* end ctl mode checking */
}
projects / mirror_ubuntu-jammy-kernel.git / blobdiff