/*
- * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
#include "wil6210.h"
#include "txrx.h"
+#include "wmi.h"
+
+#define WAIT_FOR_DISCONNECT_TIMEOUT_MS 2000
+#define WAIT_FOR_DISCONNECT_INTERVAL_MS 10
static bool no_fw_recovery;
module_param(no_fw_recovery, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(no_fw_recovery, " disable FW error recovery");
+static bool no_fw_load = true;
+module_param(no_fw_load, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(no_fw_load, " do not download FW, use one in on-card flash.");
+
+#define RST_DELAY (20) /* msec, for loop in @wil_target_reset */
+#define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */
+
/*
* Due to a hardware issue,
* one has to read/write to/from NIC in 32-bit chunks;
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil->wdev;
struct wil_sta_info *sta = &wil->sta[cid];
+
wil_dbg_misc(wil, "%s(CID %d, status %d)\n", __func__, cid,
sta->status);
static int wil_find_free_vring(struct wil6210_priv *wil)
{
int i;
+
for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
if (!wil->vring_tx[i].va)
return i;
void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid)
{
+ wil_dbg_misc(wil, "%s()\n", __func__);
+
del_timer_sync(&wil->connect_timer);
_wil6210_disconnect(wil, bssid);
}
void wil_priv_deinit(struct wil6210_priv *wil)
{
+ wil_dbg_misc(wil, "%s()\n", __func__);
+
del_timer_sync(&wil->scan_timer);
cancel_work_sync(&wil->disconnect_worker);
cancel_work_sync(&wil->fw_error_worker);
destroy_workqueue(wil->wmi_wq);
}
-static void wil_target_reset(struct wil6210_priv *wil)
+/* target operations */
+/* register read */
+#define R(a) ioread32(wil->csr + HOSTADDR(a))
+/* register write. wmb() to make sure it is completed */
+#define W(a, v) do { iowrite32(v, wil->csr + HOSTADDR(a)); wmb(); } while (0)
+/* register set = read, OR, write */
+#define S(a, v) W(a, R(a) | v)
+/* register clear = read, AND with inverted, write */
+#define C(a, v) W(a, R(a) & ~v)
+
+static inline void wil_halt_cpu(struct wil6210_priv *wil)
+{
+ W(RGF_USER_USER_CPU_0, BIT_USER_USER_CPU_MAN_RST);
+ W(RGF_USER_MAC_CPU_0, BIT_USER_MAC_CPU_MAN_RST);
+}
+
+static inline void wil_release_cpu(struct wil6210_priv *wil)
+{
+ /* Start CPU */
+ W(RGF_USER_USER_CPU_0, 1);
+}
+
+static int wil_target_reset(struct wil6210_priv *wil)
{
int delay = 0;
u32 hw_state;
wil_dbg_misc(wil, "Resetting \"%s\"...\n", wil->board->name);
- /* register read */
-#define R(a) ioread32(wil->csr + HOSTADDR(a))
- /* register write */
-#define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a))
- /* register set = read, OR, write */
-#define S(a, v) W(a, R(a) | v)
- /* register clear = read, AND with inverted, write */
-#define C(a, v) W(a, R(a) & ~v)
-
- wmb(); /* If host reorder writes here -> race in NIC */
- W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */
wil->hw_version = R(RGF_USER_FW_REV_ID);
rev_id = wil->hw_version & 0xff;
/* Clear MAC link up */
S(RGF_HP_CTRL, BIT(15));
- /* hpal_perst_from_pad_src_n_mask */
- S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6));
- /* car_perst_rst_src_n_mask */
- S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(7));
- wmb(); /* order is important here */
+ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT_HPAL_PERST_FROM_PAD);
+ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT_CAR_PERST_RST);
+
+ wil_halt_cpu(wil);
+ C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_CAR_AHB_SW_SEL); /* 40 MHz */
if (is_sparrow) {
W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f);
- wmb(); /* order is important here */
+ W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf);
}
- W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */
- wmb(); /* If host reorder writes here -> race in NIC */
- W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */
- wmb(); /* order is important here */
-
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
- W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, is_sparrow ? 0x000000B0 : 0x00000170);
- W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00);
- wmb(); /* order is important here */
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, is_sparrow ? 0x000000f0 : 0x00000170);
+ W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FE00);
if (is_sparrow) {
W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x0);
- wmb(); /* order is important here */
+ W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0x0);
}
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
- wmb(); /* order is important here */
if (is_sparrow) {
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000003);
/* reset A2 PCIE AHB */
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000);
-
} else {
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001);
if (rev_id == 1) {
W(RGF_PCIE_LOS_COUNTER_CTL, BIT(6) | BIT(8));
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000);
}
-
}
/* TODO: check order here!!! Erez code is different */
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
- wmb(); /* order is important here */
- /* wait until device ready */
+ /* wait until device ready. typical time is 200..250 msec */
do {
- msleep(1);
+ msleep(RST_DELAY);
hw_state = R(RGF_USER_HW_MACHINE_STATE);
- if (delay++ > 100) {
+ if (delay++ > RST_COUNT) {
wil_err(wil, "Reset not completed, hw_state 0x%08x\n",
hw_state);
- return;
+ return -ETIME;
}
} while (hw_state != HW_MACHINE_BOOT_DONE);
W(RGF_PCIE_LOS_COUNTER_CTL, BIT(8));
C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
- wmb(); /* order is important here */
- wil_dbg_misc(wil, "Reset completed in %d ms\n", delay);
+ wil_dbg_misc(wil, "Reset completed in %d ms\n", delay * RST_DELAY);
+ return 0;
+}
#undef R
#undef W
#undef S
#undef C
-}
void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
{
{
ulong to = msecs_to_jiffies(1000);
ulong left = wait_for_completion_timeout(&wil->wmi_ready, to);
+
if (0 == left) {
wil_err(wil, "Firmware not ready\n");
return -ETIME;
{
int rc;
+ wil_dbg_misc(wil, "%s()\n", __func__);
+
WARN_ON(!mutex_is_locked(&wil->mutex));
cancel_work_sync(&wil->disconnect_worker);
wil6210_disconnect(wil, NULL);
wil->status = 0; /* prevent NAPI from being scheduled */
- if (test_bit(wil_status_napi_en, &wil->status)) {
+ if (test_bit(wil_status_napi_en, &wil->status))
napi_synchronize(&wil->napi_rx);
- }
if (wil->scan_request) {
wil_dbg_misc(wil, "Abort scan_request 0x%p\n",
flush_workqueue(wil->wmi_wq_conn);
flush_workqueue(wil->wmi_wq);
- /* TODO: put MAC in reset */
- wil_target_reset(wil);
-
+ rc = wil_target_reset(wil);
wil_rx_fini(wil);
+ if (rc)
+ return rc;
+
+ if (!no_fw_load) {
+ wil_info(wil, "Use firmware <%s>\n", WIL_FW_NAME);
+ wil_halt_cpu(wil);
+ /* Loading f/w from the file */
+ rc = wil_request_firmware(wil, WIL_FW_NAME);
+ if (rc)
+ return rc;
+
+ /* clear any interrupts which on-card-firmware may have set */
+ wil6210_clear_irq(wil);
+ { /* CAF_ICR - clear and mask */
+ u32 a = HOSTADDR(RGF_CAF_ICR) +
+ offsetof(struct RGF_ICR, ICR);
+ u32 m = HOSTADDR(RGF_CAF_ICR) +
+ offsetof(struct RGF_ICR, IMV);
+ u32 icr = ioread32(wil->csr + a);
+
+ iowrite32(icr, wil->csr + a); /* W1C */
+ iowrite32(~0, wil->csr + m);
+ wmb(); /* wait for completion */
+ }
+ wil_release_cpu(wil);
+ } else {
+ wil_info(wil, "Use firmware from on-card flash\n");
+ }
/* init after reset */
wil->pending_connect_cid = -1;
reinit_completion(&wil->wmi_ready);
- /* TODO: release MAC reset */
wil6210_enable_irq(wil);
/* we just started MAC, wait for FW ready */
napi_enable(&wil->napi_tx);
set_bit(wil_status_napi_en, &wil->status);
+ if (wil->platform_ops.bus_request)
+ wil->platform_ops.bus_request(wil->platform_handle,
+ WIL_MAX_BUS_REQUEST_KBPS);
+
return 0;
}
{
int rc;
+ wil_dbg_misc(wil, "%s()\n", __func__);
+
mutex_lock(&wil->mutex);
rc = __wil_up(wil);
mutex_unlock(&wil->mutex);
static int __wil_down(struct wil6210_priv *wil)
{
+ int iter = WAIT_FOR_DISCONNECT_TIMEOUT_MS /
+ WAIT_FOR_DISCONNECT_INTERVAL_MS;
+
WARN_ON(!mutex_is_locked(&wil->mutex));
+ if (wil->platform_ops.bus_request)
+ wil->platform_ops.bus_request(wil->platform_handle, 0);
+
clear_bit(wil_status_napi_en, &wil->status);
napi_disable(&wil->napi_rx);
napi_disable(&wil->napi_tx);
wil->scan_request = NULL;
}
- wil6210_disconnect(wil, NULL);
+ if (test_bit(wil_status_fwconnected, &wil->status) ||
+ test_bit(wil_status_fwconnecting, &wil->status))
+ wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
+
+ /* make sure wil is idle (not connected) */
+ mutex_unlock(&wil->mutex);
+ while (iter--) {
+ int idle = !test_bit(wil_status_fwconnected, &wil->status) &&
+ !test_bit(wil_status_fwconnecting, &wil->status);
+ if (idle)
+ break;
+ msleep(WAIT_FOR_DISCONNECT_INTERVAL_MS);
+ }
+ mutex_lock(&wil->mutex);
+
+ if (!iter)
+ wil_err(wil, "timeout waiting for idle FW/HW\n");
+
wil_rx_fini(wil);
return 0;
{
int rc;
+ wil_dbg_misc(wil, "%s()\n", __func__);
+
mutex_lock(&wil->mutex);
rc = __wil_down(wil);
mutex_unlock(&wil->mutex);