#define ASPM_STATE_L0S_UP (1) /* Upstream direction L0s state */
#define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */
#define ASPM_STATE_L1 (4) /* L1 state */
+#define ASPM_STATE_L1_1 (8) /* ASPM L1.1 state */
+#define ASPM_STATE_L1_2 (0x10) /* ASPM L1.2 state */
+#define ASPM_STATE_L1_1_PCIPM (0x20) /* PCI PM L1.1 state */
+#define ASPM_STATE_L1_2_PCIPM (0x40) /* PCI PM L1.2 state */
+#define ASPM_STATE_L1_SS_PCIPM (ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM)
+#define ASPM_STATE_L1_2_MASK (ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM)
+#define ASPM_STATE_L1SS (ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\
+ ASPM_STATE_L1_2_MASK)
#define ASPM_STATE_L0S (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
-#define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1)
+#define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1 | \
+ ASPM_STATE_L1SS)
+
+/*
+ * When L1 substates are enabled, the LTR L1.2 threshold is a timing parameter
+ * that decides whether L1.1 or L1.2 is entered (Refer PCIe spec for details).
+ * Not sure is there is a way to "calculate" this on the fly, but maybe we
+ * could turn it into a parameter in future. This value has been taken from
+ * the following files from Intel's coreboot (which is the only code I found
+ * to have used this):
+ * https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html
+ * https://review.coreboot.org/#/c/8832/
+ */
+#define LTR_L1_2_THRESHOLD_BITS ((1 << 21) | (1 << 23) | (1 << 30))
struct aspm_latency {
u32 l0s; /* L0s latency (nsec) */
struct pcie_link_state {
struct pci_dev *pdev; /* Upstream component of the Link */
+ struct pci_dev *downstream; /* Downstream component, function 0 */
struct pcie_link_state *root; /* pointer to the root port link */
struct pcie_link_state *parent; /* pointer to the parent Link state */
struct list_head sibling; /* node in link_list */
struct list_head link; /* node in parent's children list */
/* ASPM state */
- u32 aspm_support:3; /* Supported ASPM state */
- u32 aspm_enabled:3; /* Enabled ASPM state */
- u32 aspm_capable:3; /* Capable ASPM state with latency */
- u32 aspm_default:3; /* Default ASPM state by BIOS */
- u32 aspm_disable:3; /* Disabled ASPM state */
+ u32 aspm_support:7; /* Supported ASPM state */
+ u32 aspm_enabled:7; /* Enabled ASPM state */
+ u32 aspm_capable:7; /* Capable ASPM state with latency */
+ u32 aspm_default:7; /* Default ASPM state by BIOS */
+ u32 aspm_disable:7; /* Disabled ASPM state */
/* Clock PM state */
u32 clkpm_capable:1; /* Clock PM capable? */
* has one slot under it, so at most there are 8 functions.
*/
struct aspm_latency acceptable[8];
+
+ /* L1 PM Substate info */
+ struct {
+ u32 up_cap_ptr; /* L1SS cap ptr in upstream dev */
+ u32 dw_cap_ptr; /* L1SS cap ptr in downstream dev */
+ u32 ctl1; /* value to be programmed in ctl1 */
+ u32 ctl2; /* value to be programmed in ctl2 */
+ } l1ss;
};
static int aspm_disabled, aspm_force;
#define POLICY_DEFAULT 0 /* BIOS default setting */
#define POLICY_PERFORMANCE 1 /* high performance */
#define POLICY_POWERSAVE 2 /* high power saving */
+#define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */
#ifdef CONFIG_PCIEASPM_PERFORMANCE
static int aspm_policy = POLICY_PERFORMANCE;
#elif defined CONFIG_PCIEASPM_POWERSAVE
static int aspm_policy = POLICY_POWERSAVE;
+#elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE
+static int aspm_policy = POLICY_POWER_SUPERSAVE;
#else
static int aspm_policy;
#endif
static const char *policy_str[] = {
[POLICY_DEFAULT] = "default",
[POLICY_PERFORMANCE] = "performance",
- [POLICY_POWERSAVE] = "powersave"
+ [POLICY_POWERSAVE] = "powersave",
+ [POLICY_POWER_SUPERSAVE] = "powersupersave"
};
#define LINK_RETRAIN_TIMEOUT HZ
return 0;
case POLICY_POWERSAVE:
/* Enable ASPM L0s/L1 */
+ return (ASPM_STATE_L0S | ASPM_STATE_L1);
+ case POLICY_POWER_SUPERSAVE:
+ /* Enable Everything */
return ASPM_STATE_ALL;
case POLICY_DEFAULT:
return link->aspm_default;
/* Disable ASPM and Clock PM */
return 0;
case POLICY_POWERSAVE:
- /* Disable Clock PM */
+ case POLICY_POWER_SUPERSAVE:
+ /* Enable Clock PM */
return 1;
case POLICY_DEFAULT:
return link->clkpm_default;
return (1000 << encoding);
}
+/* Convert L1SS T_pwr encoding to usec */
+static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val)
+{
+ switch (scale) {
+ case 0:
+ return val * 2;
+ case 1:
+ return val * 10;
+ case 2:
+ return val * 100;
+ }
+ dev_err(&pdev->dev, "%s: Invalid T_PwrOn scale: %u\n",
+ __func__, scale);
+ return 0;
+}
+
struct aspm_register_info {
u32 support:2;
u32 enabled:2;
u32 latency_encoding_l0s;
u32 latency_encoding_l1;
+
+ /* L1 substates */
+ u32 l1ss_cap_ptr;
+ u32 l1ss_cap;
+ u32 l1ss_ctl1;
+ u32 l1ss_ctl2;
};
static void pcie_get_aspm_reg(struct pci_dev *pdev,
info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, ®16);
info->enabled = reg16 & PCI_EXP_LNKCTL_ASPMC;
+
+ /* Read L1 PM substate capabilities */
+ info->l1ss_cap = info->l1ss_ctl1 = info->l1ss_ctl2 = 0;
+ info->l1ss_cap_ptr = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
+ if (!info->l1ss_cap_ptr)
+ return;
+ pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CAP,
+ &info->l1ss_cap);
+ if (!(info->l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) {
+ info->l1ss_cap = 0;
+ return;
+ }
+ pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CTL1,
+ &info->l1ss_ctl1);
+ pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CTL2,
+ &info->l1ss_ctl2);
}
static void pcie_aspm_check_latency(struct pci_dev *endpoint)
* Check L1 latency.
* Every switch on the path to root complex need 1
* more microsecond for L1. Spec doesn't mention L0s.
+ *
+ * The exit latencies for L1 substates are not advertised
+ * by a device. Since the spec also doesn't mention a way
+ * to determine max latencies introduced by enabling L1
+ * substates on the components, it is not clear how to do
+ * a L1 substate exit latency check. We assume that the
+ * L1 exit latencies advertised by a device include L1
+ * substate latencies (and hence do not do any check).
*/
latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1);
if ((link->aspm_capable & ASPM_STATE_L1) &&
}
}
+/*
+ * The L1 PM substate capability is only implemented in function 0 in a
+ * multi function device.
+ */
+static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
+{
+ struct pci_dev *child;
+
+ list_for_each_entry(child, &linkbus->devices, bus_list)
+ if (PCI_FUNC(child->devfn) == 0)
+ return child;
+ return NULL;
+}
+
+/* Calculate L1.2 PM substate timing parameters */
+static void aspm_calc_l1ss_info(struct pcie_link_state *link,
+ struct aspm_register_info *upreg,
+ struct aspm_register_info *dwreg)
+{
+ u32 val1, val2, scale1, scale2;
+
+ link->l1ss.up_cap_ptr = upreg->l1ss_cap_ptr;
+ link->l1ss.dw_cap_ptr = dwreg->l1ss_cap_ptr;
+ link->l1ss.ctl1 = link->l1ss.ctl2 = 0;
+
+ if (!(link->aspm_support & ASPM_STATE_L1_2_MASK))
+ return;
+
+ /* Choose the greater of the two T_cmn_mode_rstr_time */
+ val1 = (upreg->l1ss_cap >> 8) & 0xFF;
+ val2 = (upreg->l1ss_cap >> 8) & 0xFF;
+ if (val1 > val2)
+ link->l1ss.ctl1 |= val1 << 8;
+ else
+ link->l1ss.ctl1 |= val2 << 8;
+ /*
+ * We currently use LTR L1.2 threshold to be fixed constant picked from
+ * Intel's coreboot.
+ */
+ link->l1ss.ctl1 |= LTR_L1_2_THRESHOLD_BITS;
+
+ /* Choose the greater of the two T_pwr_on */
+ val1 = (upreg->l1ss_cap >> 19) & 0x1F;
+ scale1 = (upreg->l1ss_cap >> 16) & 0x03;
+ val2 = (dwreg->l1ss_cap >> 19) & 0x1F;
+ scale2 = (dwreg->l1ss_cap >> 16) & 0x03;
+
+ if (calc_l1ss_pwron(link->pdev, scale1, val1) >
+ calc_l1ss_pwron(link->downstream, scale2, val2))
+ link->l1ss.ctl2 |= scale1 | (val1 << 3);
+ else
+ link->l1ss.ctl2 |= scale2 | (val2 << 3);
+}
+
static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
{
struct pci_dev *child, *parent = link->pdev;
/* Get upstream/downstream components' register state */
pcie_get_aspm_reg(parent, &upreg);
- child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
+ child = pci_function_0(linkbus);
pcie_get_aspm_reg(child, &dwreg);
+ link->downstream = child;
/*
* If ASPM not supported, don't mess with the clocks and link,
link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1);
link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1);
+ /* Setup L1 substate */
+ if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1)
+ link->aspm_support |= ASPM_STATE_L1_1;
+ if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2)
+ link->aspm_support |= ASPM_STATE_L1_2;
+ if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1)
+ link->aspm_support |= ASPM_STATE_L1_1_PCIPM;
+ if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2)
+ link->aspm_support |= ASPM_STATE_L1_2_PCIPM;
+
+ if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
+ link->aspm_enabled |= ASPM_STATE_L1_1;
+ if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
+ link->aspm_enabled |= ASPM_STATE_L1_2;
+ if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
+ link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM;
+ if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
+ link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM;
+
+ if (link->aspm_support & ASPM_STATE_L1SS)
+ aspm_calc_l1ss_info(link, &upreg, &dwreg);
+
/* Save default state */
link->aspm_default = link->aspm_enabled;
}
}
+static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos,
+ u32 clear, u32 set)
+{
+ u32 val;
+
+ pci_read_config_dword(pdev, pos, &val);
+ val &= ~clear;
+ val |= set;
+ pci_write_config_dword(pdev, pos, val);
+}
+
+/* Configure the ASPM L1 substates */
+static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
+{
+ u32 val, enable_req;
+ struct pci_dev *child = link->downstream, *parent = link->pdev;
+ u32 up_cap_ptr = link->l1ss.up_cap_ptr;
+ u32 dw_cap_ptr = link->l1ss.dw_cap_ptr;
+
+ enable_req = (link->aspm_enabled ^ state) & state;
+
+ /*
+ * Here are the rules specified in the PCIe spec for enabling L1SS:
+ * - When enabling L1.x, enable bit at parent first, then at child
+ * - When disabling L1.x, disable bit at child first, then at parent
+ * - When enabling ASPM L1.x, need to disable L1
+ * (at child followed by parent).
+ * - The ASPM/PCIPM L1.2 must be disabled while programming timing
+ * parameters
+ *
+ * To keep it simple, disable all L1SS bits first, and later enable
+ * what is needed.
+ */
+
+ /* Disable all L1 substates */
+ pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
+ PCI_L1SS_CTL1_L1SS_MASK, 0);
+ pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
+ PCI_L1SS_CTL1_L1SS_MASK, 0);
+ /*
+ * If needed, disable L1, and it gets enabled later
+ * in pcie_config_aspm_link().
+ */
+ if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) {
+ pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_ASPM_L1, 0);
+ pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_ASPM_L1, 0);
+ }
+
+ if (enable_req & ASPM_STATE_L1_2_MASK) {
+
+ /* Program T_pwr_on in both ports */
+ pci_write_config_dword(parent, up_cap_ptr + PCI_L1SS_CTL2,
+ link->l1ss.ctl2);
+ pci_write_config_dword(child, dw_cap_ptr + PCI_L1SS_CTL2,
+ link->l1ss.ctl2);
+
+ /* Program T_cmn_mode in parent */
+ pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
+ 0xFF00, link->l1ss.ctl1);
+
+ /* Program LTR L1.2 threshold in both ports */
+ pci_clear_and_set_dword(parent, dw_cap_ptr + PCI_L1SS_CTL1,
+ 0xE3FF0000, link->l1ss.ctl1);
+ pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
+ 0xE3FF0000, link->l1ss.ctl1);
+ }
+
+ val = 0;
+ if (state & ASPM_STATE_L1_1)
+ val |= PCI_L1SS_CTL1_ASPM_L1_1;
+ if (state & ASPM_STATE_L1_2)
+ val |= PCI_L1SS_CTL1_ASPM_L1_2;
+ if (state & ASPM_STATE_L1_1_PCIPM)
+ val |= PCI_L1SS_CTL1_PCIPM_L1_1;
+ if (state & ASPM_STATE_L1_2_PCIPM)
+ val |= PCI_L1SS_CTL1_PCIPM_L1_2;
+
+ /* Enable what we need to enable */
+ pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
+ PCI_L1SS_CAP_L1_PM_SS, val);
+ pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
+ PCI_L1SS_CAP_L1_PM_SS, val);
+}
+
static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
{
pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL,
static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
{
u32 upstream = 0, dwstream = 0;
- struct pci_dev *child, *parent = link->pdev;
+ struct pci_dev *child = link->downstream, *parent = link->pdev;
struct pci_bus *linkbus = parent->subordinate;
- /* Nothing to do if the link is already in the requested state */
+ /* Enable only the states that were not explicitly disabled */
state &= (link->aspm_capable & ~link->aspm_disable);
+
+ /* Can't enable any substates if L1 is not enabled */
+ if (!(state & ASPM_STATE_L1))
+ state &= ~ASPM_STATE_L1SS;
+
+ /* Spec says both ports must be in D0 before enabling PCI PM substates*/
+ if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) {
+ state &= ~ASPM_STATE_L1_SS_PCIPM;
+ state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM);
+ }
+
+ /* Nothing to do if the link is already in the requested state */
if (link->aspm_enabled == state)
return;
/* Convert ASPM state to upstream/downstream ASPM register state */
upstream |= PCI_EXP_LNKCTL_ASPM_L1;
dwstream |= PCI_EXP_LNKCTL_ASPM_L1;
}
+
+ if (link->aspm_capable & ASPM_STATE_L1SS)
+ pcie_config_aspm_l1ss(link, state);
+
/*
* Spec 2.0 suggests all functions should be configured the
* same setting for ASPM. Enabling ASPM L1 should be done in
* the BIOS's expectation, we'll do so once pci_enable_device() is
* called.
*/
- if (aspm_policy != POLICY_POWERSAVE) {
+ if (aspm_policy != POLICY_POWERSAVE &&
+ aspm_policy != POLICY_POWER_SUPERSAVE) {
pcie_config_aspm_path(link);
pcie_set_clkpm(link, policy_to_clkpm_state(link));
}
if (aspm_disabled || !link)
return;
- if (aspm_policy != POLICY_POWERSAVE)
+ if (aspm_policy != POLICY_POWERSAVE &&
+ aspm_policy != POLICY_POWER_SUPERSAVE)
return;
down_read(&pci_bus_sem);
projects / mirror_ubuntu-bionic-kernel.git / blobdiff