#include <asm/io.h>
#include <scsi/scsi_device.h>
-
+#include <scsi/scsi_cmnd.h>
/* Turn on for general debugging---too verbose for normal use */
#undef NCR_700_DEBUG
#define SCRIPT_RETURN 0x90080000
};
-/* We use device->hostdata to store negotiated parameters. This is
- * supposed to be a pointer to a device private area, but we cannot
- * really use it as such since it will never be freed, so just use the
- * 32 bits to cram the information. The SYNC negotiation sequence looks
- * like:
+struct NCR_700_Device_Parameters {
+ /* space for creating a request sense command. Really, except
+ * for the annoying SCSI-2 requirement for LUN information in
+ * cmnd[1], this could be in static storage */
+ unsigned char cmnd[MAX_COMMAND_SIZE];
+ __u8 depth;
+};
+
+
+/* The SYNC negotiation sequence looks like:
*
* If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the
* initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION
#define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION (1<<17)
#define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19)
+static inline char *NCR_700_get_sense_cmnd(struct scsi_device *SDp)
+{
+ struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
+
+ return hostdata->cmnd;
+}
+
static inline void
NCR_700_set_depth(struct scsi_device *SDp, __u8 depth)
{
- long l = (long)SDp->hostdata;
+ struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
- l &= 0xffff00ff;
- l |= 0xff00 & (depth << 8);
- SDp->hostdata = (void *)l;
+ hostdata->depth = depth;
}
static inline __u8
NCR_700_get_depth(struct scsi_device *SDp)
{
- return ((((unsigned long)SDp->hostdata) & 0xff00)>>8);
+ struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
+
+ return hostdata->depth;
}
static inline int
NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag)
#define NCR_700_SLOT_BUSY (1|NCR_700_SLOT_MAGIC) /* slot has command active on HA */
#define NCR_700_SLOT_QUEUED (2|NCR_700_SLOT_MAGIC) /* slot has command to be made active on HA */
__u8 state;
+ #define NCR_700_FLAG_AUTOSENSE 0x01
+ __u8 flags;
int tag;
__u32 resume_offset;
struct scsi_cmnd *cmnd;
#ifdef CONFIG_53C700_LE_ON_BE
#define bE (hostdata->force_le_on_be ? 0 : 3)
#define bSWAP (hostdata->force_le_on_be)
-/* This is terrible, but there's no raw version of ioread32. That means
- * that on a be board we swap twice (once in ioread32 and once again to
- * get the value correct) */
-#define bS_to_io(x) ((hostdata->force_le_on_be) ? (x) : cpu_to_le32(x))
+#define bEBus (!hostdata->force_le_on_be)
#elif defined(__BIG_ENDIAN)
#define bE 3
#define bSWAP 0
-#define bS_to_io(x) (x)
#elif defined(__LITTLE_ENDIAN)
#define bE 0
#define bSWAP 0
-#define bS_to_io(x) (x)
#else
#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?"
#endif
+#ifndef bEBus
+#ifdef CONFIG_53C700_BE_BUS
+#define bEBus 1
+#else
+#define bEBus 0
+#endif
+#endif
#define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x))
#define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x))
{
const struct NCR_700_Host_Parameters *hostdata
= (struct NCR_700_Host_Parameters *)host->hostdata[0];
- __u32 value = ioread32(hostdata->base + reg);
+ __u32 value = bEBus ? ioread32be(hostdata->base + reg) :
+ ioread32(hostdata->base + reg);
#if 1
/* sanity check the register */
- if((reg & 0x3) != 0)
- BUG();
+ BUG_ON((reg & 0x3) != 0);
#endif
- return bS_to_io(value);
+ return value;
}
static inline void
#if 1
/* sanity check the register */
- if((reg & 0x3) != 0)
- BUG();
+ BUG_ON((reg & 0x3) != 0);
#endif
- iowrite32(bS_to_io(value), hostdata->base + reg);
+ bEBus ? iowrite32be(value, hostdata->base + reg):
+ iowrite32(value, hostdata->base + reg);
}
#endif