* of chips. To use it, you write an architecture specific functions
* and macros and include this file in your driver.
*
- * These macros control options :
- * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
- * defined.
- *
- * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
- *
- * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
- * transceivers.
- *
- * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
- *
- * REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
- *
* These macros MUST be defined :
*
* NCR5380_read(register) - read from the specified register
*
* Either real DMA *or* pseudo DMA may be implemented
*
- * NCR5380_dma_write_setup(instance, src, count) - initialize
- * NCR5380_dma_read_setup(instance, dst, count) - initialize
- * NCR5380_dma_residual(instance); - residual count
+ * NCR5380_dma_xfer_len - determine size of DMA/PDMA transfer
+ * NCR5380_dma_send_setup - execute DMA/PDMA from memory to 5380
+ * NCR5380_dma_recv_setup - execute DMA/PDMA from 5380 to memory
+ * NCR5380_dma_residual - residual byte count
*
* The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID. If the
- * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used.
+ * after setting the appropriate host specific fields and ID.
*/
#ifndef NCR5380_io_delay
/**
* NCR5380_poll_politely2 - wait for two chip register values
- * @instance: controller to poll
+ * @hostdata: host private data
* @reg1: 5380 register to poll
* @bit1: Bitmask to check
* @val1: Expected value
* Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT.
*/
-static int NCR5380_poll_politely2(struct Scsi_Host *instance,
- int reg1, int bit1, int val1,
- int reg2, int bit2, int val2, int wait)
+static int NCR5380_poll_politely2(struct NCR5380_hostdata *hostdata,
+ unsigned int reg1, u8 bit1, u8 val1,
+ unsigned int reg2, u8 bit2, u8 val2,
+ unsigned long wait)
{
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned long n = hostdata->poll_loops;
unsigned long deadline = jiffies + wait;
- unsigned long n;
- /* Busy-wait for up to 10 ms */
- n = min(10000U, jiffies_to_usecs(wait));
- n *= hostdata->accesses_per_ms;
- n /= 2000;
do {
if ((NCR5380_read(reg1) & bit1) == val1)
return 0;
static void NCR5380_print(struct Scsi_Host *instance)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char status, data, basr, mr, icr, i;
data = NCR5380_read(CURRENT_SCSI_DATA_REG);
static void NCR5380_print_phase(struct Scsi_Host *instance)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char status;
int i;
}
#endif
-
-static int probe_irq;
-
-/**
- * probe_intr - helper for IRQ autoprobe
- * @irq: interrupt number
- * @dev_id: unused
- * @regs: unused
- *
- * Set a flag to indicate the IRQ in question was received. This is
- * used by the IRQ probe code.
- */
-
-static irqreturn_t probe_intr(int irq, void *dev_id)
-{
- probe_irq = irq;
- return IRQ_HANDLED;
-}
-
-/**
- * NCR5380_probe_irq - find the IRQ of an NCR5380
- * @instance: NCR5380 controller
- * @possible: bitmask of ISA IRQ lines
- *
- * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
- * and then looking to see what interrupt actually turned up.
- */
-
-static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
- int possible)
-{
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
- unsigned long timeout;
- int trying_irqs, i, mask;
-
- for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
- if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
- trying_irqs |= mask;
-
- timeout = jiffies + msecs_to_jiffies(250);
- probe_irq = NO_IRQ;
-
- /*
- * A interrupt is triggered whenever BSY = false, SEL = true
- * and a bit set in the SELECT_ENABLE_REG is asserted on the
- * SCSI bus.
- *
- * Note that the bus is only driven when the phase control signals
- * (I/O, C/D, and MSG) match those in the TCR, so we must reset that
- * to zero.
- */
-
- NCR5380_write(TARGET_COMMAND_REG, 0);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
-
- while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
- schedule_timeout_uninterruptible(1);
-
- NCR5380_write(SELECT_ENABLE_REG, 0);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
- if (trying_irqs & mask)
- free_irq(i, NULL);
-
- return probe_irq;
-}
-
/**
- * NCR58380_info - report driver and host information
+ * NCR5380_info - report driver and host information
* @instance: relevant scsi host instance
*
* For use as the host template info() handler.
return hostdata->info;
}
-static void prepare_info(struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
- snprintf(hostdata->info, sizeof(hostdata->info),
- "%s, io_port 0x%lx, n_io_port %d, "
- "base 0x%lx, irq %d, "
- "can_queue %d, cmd_per_lun %d, "
- "sg_tablesize %d, this_id %d, "
- "flags { %s%s%s}, "
- "options { %s} ",
- instance->hostt->name, instance->io_port, instance->n_io_port,
- instance->base, instance->irq,
- instance->can_queue, instance->cmd_per_lun,
- instance->sg_tablesize, instance->this_id,
- hostdata->flags & FLAG_DMA_FIXUP ? "DMA_FIXUP " : "",
- hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
- hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
-#ifdef DIFFERENTIAL
- "DIFFERENTIAL "
-#endif
-#ifdef PARITY
- "PARITY "
-#endif
- "");
-}
-
/**
* NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
unsigned long deadline;
+ unsigned long accesses_per_ms;
instance->max_lun = 7;
if (!hostdata->work_q)
return -ENOMEM;
- prepare_info(instance);
+ snprintf(hostdata->info, sizeof(hostdata->info),
+ "%s, irq %d, io_port 0x%lx, base 0x%lx, can_queue %d, cmd_per_lun %d, sg_tablesize %d, this_id %d, flags { %s%s%s}",
+ instance->hostt->name, instance->irq, hostdata->io_port,
+ hostdata->base, instance->can_queue, instance->cmd_per_lun,
+ instance->sg_tablesize, instance->this_id,
+ hostdata->flags & FLAG_DMA_FIXUP ? "DMA_FIXUP " : "",
+ hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
+ hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "");
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
++i;
cpu_relax();
} while (time_is_after_jiffies(deadline));
- hostdata->accesses_per_ms = i / 256;
+ accesses_per_ms = i / 256;
+ hostdata->poll_loops = NCR5380_REG_POLL_TIME * accesses_per_ms / 2;
return 0;
}
case 3:
case 5:
shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n");
- NCR5380_poll_politely(instance,
+ NCR5380_poll_politely(hostdata,
STATUS_REG, SR_BSY, 0, 5 * HZ);
break;
case 2:
list_empty(&hostdata->unissued) &&
list_empty(&hostdata->autosense) &&
!hostdata->connected &&
- !hostdata->selecting)
+ !hostdata->selecting) {
NCR5380_release_dma_irq(instance);
+ }
}
/**
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- transferred = hostdata->dma_len - NCR5380_dma_residual(instance);
+ transferred = hostdata->dma_len - NCR5380_dma_residual(hostdata);
hostdata->dma_len = 0;
data = (unsigned char **)&hostdata->connected->SCp.ptr;
}
handled = 1;
} else {
- shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n");
+ dsprintk(NDEBUG_INTR, instance, "interrupt without IRQ bit\n");
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_DMA_ENABLE;
#endif
static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
struct scsi_cmnd *cmd)
+ __releases(&hostdata->lock) __acquires(&hostdata->lock)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char tmp[3], phase;
*/
spin_unlock_irq(&hostdata->lock);
- err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0,
+ err = NCR5380_poll_politely2(hostdata, MODE_REG, MR_ARBITRATE, 0,
INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
ICR_ARBITRATION_PROGRESS, HZ);
spin_lock_irq(&hostdata->lock);
* selection.
*/
- err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY,
+ err = NCR5380_poll_politely(hostdata, STATUS_REG, SR_BSY, SR_BSY,
msecs_to_jiffies(250));
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
/* Wait for start of REQ/ACK handshake */
- err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ err = NCR5380_poll_politely(hostdata, STATUS_REG, SR_REQ, SR_REQ, HZ);
spin_lock_irq(&hostdata->lock);
if (err < 0) {
shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
data = tmp;
phase = PHASE_MSGOUT;
NCR5380_transfer_pio(instance, &phase, &len, &data);
+ if (len) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ cmd->result = DID_ERROR << 16;
+ complete_cmd(instance, cmd);
+ dsprintk(NDEBUG_SELECTION, instance, "IDENTIFY message transfer failed\n");
+ cmd = NULL;
+ goto out;
+ }
+
dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n");
- /* XXX need to handle errors here */
hostdata->connected = cmd;
hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun;
unsigned char *phase, int *count,
unsigned char **data)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char p = *phase, tmp;
int c = *count;
unsigned char *d = *data;
* valid
*/
- if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
+ if (NCR5380_poll_politely(hostdata, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
break;
dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n");
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
}
- if (NCR5380_poll_politely(instance,
+ if (NCR5380_poll_politely(hostdata,
STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
break;
static void do_reset(struct Scsi_Host *instance)
{
+ struct NCR5380_hostdata __maybe_unused *hostdata = shost_priv(instance);
unsigned long flags;
local_irq_save(flags);
static int do_abort(struct Scsi_Host *instance)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char *msgptr, phase, tmp;
int len;
int rc;
* the target sees, so we just handshake.
*/
- rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
+ rc = NCR5380_poll_politely(hostdata, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
if (rc < 0)
goto timeout;
if (tmp != PHASE_MSGOUT) {
NCR5380_write(INITIATOR_COMMAND_REG,
ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
- rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
+ rc = NCR5380_poll_politely(hostdata, STATUS_REG, SR_REQ, 0, 3 * HZ);
if (rc < 0)
goto timeout;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
* starting the NCR. This is also the cleaner way for the TT.
*/
if (p & SR_IO)
- result = NCR5380_dma_recv_setup(instance, d, c);
+ result = NCR5380_dma_recv_setup(hostdata, d, c);
else
- result = NCR5380_dma_send_setup(instance, d, c);
+ result = NCR5380_dma_send_setup(hostdata, d, c);
}
/*
* NCR access, else the DMA setup gets trashed!
*/
if (p & SR_IO)
- result = NCR5380_dma_recv_setup(instance, d, c);
+ result = NCR5380_dma_recv_setup(hostdata, d, c);
else
- result = NCR5380_dma_send_setup(instance, d, c);
+ result = NCR5380_dma_send_setup(hostdata, d, c);
}
/* On failure, NCR5380_dma_xxxx_setup() returns a negative int. */
* byte.
*/
- if (NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
+ if (NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG,
BASR_DRQ, BASR_DRQ, HZ) < 0) {
result = -1;
shost_printk(KERN_ERR, instance, "PDMA read: DRQ timeout\n");
}
- if (NCR5380_poll_politely(instance, STATUS_REG,
+ if (NCR5380_poll_politely(hostdata, STATUS_REG,
SR_REQ, 0, HZ) < 0) {
result = -1;
shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n");
* Wait for the last byte to be sent. If REQ is being asserted for
* the byte we're interested, we'll ACK it and it will go false.
*/
- if (NCR5380_poll_politely2(instance,
+ if (NCR5380_poll_politely2(hostdata,
BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ,
BUS_AND_STATUS_REG, BASR_PHASE_MATCH, 0, HZ) < 0) {
result = -1;
*/
static void NCR5380_information_transfer(struct Scsi_Host *instance)
+ __releases(&hostdata->lock) __acquires(&hostdata->lock)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char msgout = NOP;
NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
}
#ifdef CONFIG_SUN3
- if (phase == PHASE_CMDOUT) {
- void *d;
- unsigned long count;
+ if (phase == PHASE_CMDOUT &&
+ sun3_dma_setup_done != cmd) {
+ int count;
if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
- count = cmd->SCp.buffer->length;
- d = sg_virt(cmd->SCp.buffer);
- } else {
- count = cmd->SCp.this_residual;
- d = cmd->SCp.ptr;
+ ++cmd->SCp.buffer;
+ --cmd->SCp.buffers_residual;
+ cmd->SCp.this_residual = cmd->SCp.buffer->length;
+ cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
}
- if (sun3_dma_setup_done != cmd &&
- sun3scsi_dma_xfer_len(count, cmd) > 0) {
- sun3scsi_dma_setup(instance, d, count,
- rq_data_dir(cmd->request));
+ count = sun3scsi_dma_xfer_len(hostdata, cmd);
+
+ if (count > 0) {
+ if (rq_data_dir(cmd->request))
+ sun3scsi_dma_send_setup(hostdata,
+ cmd->SCp.ptr, count);
+ else
+ sun3scsi_dma_recv_setup(hostdata,
+ cmd->SCp.ptr, count);
sun3_dma_setup_done = cmd;
}
#ifdef SUN3_SCSI_VME
transfersize = 0;
if (!cmd->device->borken)
- transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
+ transfersize = NCR5380_dma_xfer_len(hostdata, cmd);
if (transfersize > 0) {
len = transfersize;
} /* switch(phase) */
} else {
spin_unlock_irq(&hostdata->lock);
- NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ NCR5380_poll_politely(hostdata, STATUS_REG, SR_REQ, SR_REQ, HZ);
spin_lock_irq(&hostdata->lock);
}
}
*/
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
- if (NCR5380_poll_politely(instance,
+ if (NCR5380_poll_politely(hostdata,
STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
return;
* Wait for target to go into MSGIN.
*/
- if (NCR5380_poll_politely(instance,
+ if (NCR5380_poll_politely(hostdata,
STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
do_abort(instance);
return;
}
#ifdef CONFIG_SUN3
- {
- void *d;
- unsigned long count;
+ if (sun3_dma_setup_done != tmp) {
+ int count;
if (!tmp->SCp.this_residual && tmp->SCp.buffers_residual) {
- count = tmp->SCp.buffer->length;
- d = sg_virt(tmp->SCp.buffer);
- } else {
- count = tmp->SCp.this_residual;
- d = tmp->SCp.ptr;
+ ++tmp->SCp.buffer;
+ --tmp->SCp.buffers_residual;
+ tmp->SCp.this_residual = tmp->SCp.buffer->length;
+ tmp->SCp.ptr = sg_virt(tmp->SCp.buffer);
}
- if (sun3_dma_setup_done != tmp &&
- sun3scsi_dma_xfer_len(count, tmp) > 0) {
- sun3scsi_dma_setup(instance, d, count,
- rq_data_dir(tmp->request));
+ count = sun3scsi_dma_xfer_len(hostdata, tmp);
+
+ if (count > 0) {
+ if (rq_data_dir(tmp->request))
+ sun3scsi_dma_send_setup(hostdata,
+ tmp->SCp.ptr, count);
+ else
+ sun3scsi_dma_recv_setup(hostdata,
+ tmp->SCp.ptr, count);
sun3_dma_setup_done = tmp;
}
}
projects / mirror_ubuntu-artful-kernel.git / blobdiff