#define MAX_CARDS 8
/* old-style parameters for compatibility */
-static int ncr_irq;
+static int ncr_irq = -1;
static int ncr_addr;
static int ncr_5380;
static int ncr_53c400;
module_param(dtc_3181e, int, 0);
module_param(hp_c2502, int, 0);
-static int irq[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "IRQ number(s)");
+MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])");
static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
module_param_array(base, int, NULL, 0);
MODULE_ALIAS("g_NCR5380_mmio");
MODULE_LICENSE("GPL");
+static void g_NCR5380_trigger_irq(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ /*
+ * An interrupt is triggered whenever BSY = false, SEL = true
+ * and a bit set in the SELECT_ENABLE_REG is asserted on the
+ * SCSI bus.
+ *
+ * Note that the bus is only driven when the phase control signals
+ * (I/O, C/D, and MSG) match those in the TCR.
+ */
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
+
+ msleep(1);
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+}
+
+/**
+ * g_NCR5380_probe_irq - find the IRQ of a NCR5380 or equivalent
+ * @instance: SCSI host instance
+ *
+ * Autoprobe for the IRQ line used by the card by triggering an IRQ
+ * and then looking to see what interrupt actually turned up.
+ */
+
+static int g_NCR5380_probe_irq(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int irq_mask, irq;
+
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ irq_mask = probe_irq_on();
+ g_NCR5380_trigger_irq(instance);
+ irq = probe_irq_off(irq_mask);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ if (irq <= 0)
+ return NO_IRQ;
+ return irq;
+}
+
/*
* Configure I/O address of 53C400A or DTC436 by writing magic numbers
* to ports 0x779 and 0x379.
outb(magic[3], 0x379);
outb(magic[4], 0x379);
- /* allowed IRQs for HP C2502 */
- if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
- irq = 0;
+ if (irq == 9)
+ irq = 2;
+
if (idx >= 0 && idx <= 7)
cfg = 0x80 | idx | (irq << 4);
outb(cfg, 0x379);
}
+static irqreturn_t legacy_empty_irq_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static int legacy_find_free_irq(int *irq_table)
+{
+ while (*irq_table != -1) {
+ if (!request_irq(*irq_table, legacy_empty_irq_handler,
+ IRQF_PROBE_SHARED, "Test IRQ",
+ (void *)irq_table)) {
+ free_irq(*irq_table, (void *) irq_table);
+ return *irq_table;
+ }
+ irq_table++;
+ }
+ return -1;
+}
+
static unsigned int ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
};
static u8 hp_c2502_magic[] = { /* HP C2502 */
0x0f, 0x22, 0xf0, 0x20, 0x80
};
+static int hp_c2502_irqs[] = {
+ 9, 5, 7, 3, 4, -1
+};
static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
struct device *pdev, int base, int irq, int board)
}
}
+ /* Check for vacant slot */
+ NCR5380_write(MODE_REG, 0);
+ if (NCR5380_read(MODE_REG) != 0) {
+ ret = -ENODEV;
+ goto out_unregister;
+ }
+
ret = NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP);
if (ret)
goto out_unregister;
NCR5380_maybe_reset_bus(instance);
- if (irq != IRQ_AUTO)
- instance->irq = irq;
- else
- instance->irq = NCR5380_probe_irq(instance, 0xffff);
-
/* Compatibility with documented NCR5380 kernel parameters */
- if (instance->irq == 255)
- instance->irq = NO_IRQ;
+ if (irq == 255 || irq == 0)
+ irq = NO_IRQ;
+ else if (irq == -1)
+ irq = IRQ_AUTO;
+
+ if (board == BOARD_HP_C2502) {
+ int *irq_table = hp_c2502_irqs;
+ int board_irq = -1;
+
+ switch (irq) {
+ case NO_IRQ:
+ board_irq = 0;
+ break;
+ case IRQ_AUTO:
+ board_irq = legacy_find_free_irq(irq_table);
+ break;
+ default:
+ while (*irq_table != -1)
+ if (*irq_table++ == irq)
+ board_irq = irq;
+ }
+
+ if (board_irq <= 0) {
+ board_irq = 0;
+ irq = NO_IRQ;
+ }
+
+ magic_configure(port_idx, board_irq, magic);
+ }
+
+ if (irq == IRQ_AUTO) {
+ instance->irq = g_NCR5380_probe_irq(instance);
+ if (instance->irq == NO_IRQ)
+ shost_printk(KERN_INFO, instance, "no irq detected\n");
+ } else {
+ instance->irq = irq;
+ if (instance->irq == NO_IRQ)
+ shost_printk(KERN_INFO, instance, "no irq provided\n");
+ }
if (instance->irq != NO_IRQ) {
- /* set IRQ for HP C2502 */
- if (board == BOARD_HP_C2502)
- magic_configure(port_idx, instance->irq, magic);
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
- printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = NO_IRQ;
+ shost_printk(KERN_INFO, instance,
+ "irq %d denied\n", instance->irq);
+ } else {
+ shost_printk(KERN_INFO, instance,
+ "irq %d acquired\n", instance->irq);
}
}
- if (instance->irq == NO_IRQ) {
- printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
- printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
- }
-
ret = scsi_add_host(instance, pdev);
if (ret)
goto out_free_irq;
int ret = 0;
/* compatibility with old-style parameters */
- if (irq[0] == 0 && base[0] == 0 && card[0] == -1) {
+ if (irq[0] == -1 && base[0] == 0 && card[0] == -1) {
irq[0] = ncr_irq;
base[0] = ncr_addr;
if (ncr_5380)
projects / mirror_ubuntu-bionic-kernel.git / blobdiff