min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
}
- if (sc->sc_data_direction == DMA_TO_DEVICE)
- goto out;
-
if (rhdr->flags & ISCSI_FLAG_CMD_UNDERFLOW) {
int res_count = be32_to_cpu(rhdr->residual_count);
nop->cmdsn = cpu_to_be32(session->cmdsn);
if (hdr->itt != RESERVED_ITT) {
hdr->itt = build_itt(mtask->itt, conn->id, session->age);
+ /*
+ * TODO: We always use immediate, so we never hit this.
+ * If we start to send tmfs or nops as non-immediate then
+ * we should start checking the cmdsn numbers for mgmt tasks.
+ */
if (conn->c_stage == ISCSI_CONN_STARTED &&
- !(hdr->opcode & ISCSI_OP_IMMEDIATE))
+ !(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
+ session->queued_cmdsn++;
session->cmdsn++;
+ }
}
if (session->tt->init_mgmt_task)
/*
* Check for iSCSI window and take care of CmdSN wrap-around
*/
- if (!iscsi_sna_lte(session->cmdsn, session->max_cmdsn)) {
- debug_scsi("iSCSI CmdSN closed. MaxCmdSN %u CmdSN %u\n",
- session->max_cmdsn, session->cmdsn);
+ if (!iscsi_sna_lte(session->queued_cmdsn, session->max_cmdsn)) {
+ debug_scsi("iSCSI CmdSN closed. ExpCmdSn %u MaxCmdSN %u "
+ "CmdSN %u/%u\n", session->exp_cmdsn,
+ session->max_cmdsn, session->cmdsn,
+ session->queued_cmdsn);
return -ENOSPC;
}
return 0;
/* process command queue */
while (!list_empty(&conn->xmitqueue)) {
- rc = iscsi_check_cmdsn_window_closed(conn);
- if (rc) {
- spin_unlock_bh(&conn->session->lock);
- return rc;
- }
/*
* iscsi tcp may readd the task to the xmitqueue to send
* write data
*/
conn->ctask = list_entry(conn->xmitqueue.next,
struct iscsi_cmd_task, running);
- if (conn->ctask->state == ISCSI_TASK_PENDING) {
+ switch (conn->ctask->state) {
+ case ISCSI_TASK_ABORTING:
+ break;
+ case ISCSI_TASK_PENDING:
iscsi_prep_scsi_cmd_pdu(conn->ctask);
conn->session->tt->init_cmd_task(conn->ctask);
+ /* fall through */
+ default:
+ conn->ctask->state = ISCSI_TASK_RUNNING;
+ break;
}
- conn->ctask->state = ISCSI_TASK_RUNNING;
list_move_tail(conn->xmitqueue.next, &conn->run_list);
+
rc = iscsi_xmit_ctask(conn);
if (rc)
goto again;
goto fault;
}
- /*
- * We check this here and in data xmit, because if we get to the point
- * that this check is hitting the window then we have enough IO in
- * flight and enough IO waiting to be transmitted it is better
- * to let the scsi/block layer queue up.
- */
if (iscsi_check_cmdsn_window_closed(conn)) {
reason = FAILURE_WINDOW_CLOSED;
goto reject;
reason = FAILURE_OOM;
goto reject;
}
+ session->queued_cmdsn++;
+
sc->SCp.phase = session->age;
sc->SCp.ptr = (char *)ctask;
ctask->mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)hdr,
NULL, 0);
if (!ctask->mtask) {
+ spin_unlock_bh(&session->lock);
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+ spin_lock_bh(&session->lock)
debug_scsi("abort sent failure [itt 0x%x]\n", ctask->itt);
return -EPERM;
}
debug_scsi("abort set timeout [itt 0x%x]\n", ctask->itt);
}
spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
scsi_queue_work(session->host, &conn->xmitwork);
/*
if (signal_pending(current))
flush_signals(current);
del_timer_sync(&conn->tmabort_timer);
+ mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
return 0;
}
if (!sc)
return;
- if (ctask->state != ISCSI_TASK_PENDING)
+ if (ctask->state == ISCSI_TASK_PENDING)
+ /*
+ * cmd never made it to the xmit thread, so we should not count
+ * the cmd in the sequencing
+ */
+ conn->session->queued_cmdsn--;
+ else
conn->session->tt->cleanup_cmd_task(conn, ctask);
iscsi_ctask_mtask_cleanup(ctask);
__iscsi_put_ctask(ctask);
}
+static void iscsi_suspend_tx(struct iscsi_conn *conn)
+{
+ set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
+ scsi_flush_work(conn->session->host);
+}
+
+static void iscsi_start_tx(struct iscsi_conn *conn)
+{
+ clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
+ scsi_queue_work(conn->session->host, &conn->xmitwork);
+}
+
int iscsi_eh_abort(struct scsi_cmnd *sc)
{
+ struct Scsi_Host *host = sc->device->host;
+ struct iscsi_session *session = iscsi_hostdata(host->hostdata);
struct iscsi_cmd_task *ctask;
struct iscsi_conn *conn;
- struct iscsi_session *session;
int rc;
+ mutex_lock(&session->eh_mutex);
+ spin_lock_bh(&session->lock);
/*
* if session was ISCSI_STATE_IN_RECOVERY then we may not have
* got the command.
*/
if (!sc->SCp.ptr) {
debug_scsi("sc never reached iscsi layer or it completed.\n");
+ spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
return SUCCESS;
}
ctask = (struct iscsi_cmd_task *)sc->SCp.ptr;
conn = ctask->conn;
- session = conn->session;
conn->eh_abort_cnt++;
debug_scsi("aborting [sc %p itt 0x%x]\n", sc, ctask->itt);
- spin_lock_bh(&session->lock);
-
/*
* If we are not logged in or we have started a new session
* then let the host reset code handle this
switch (conn->tmabort_state) {
case TMABORT_SUCCESS:
spin_unlock_bh(&session->lock);
+ iscsi_suspend_tx(conn);
/*
* clean up task if aborted. grab the recv lock as a writer
*/
fail_command(conn, ctask, DID_ABORT << 16);
spin_unlock(&session->lock);
write_unlock_bh(conn->recv_lock);
- /*
- * make sure xmit thread is not still touching the
- * ctask/scsi_cmnd
- */
- scsi_flush_work(session->host);
+ iscsi_start_tx(conn);
goto success_unlocked;
case TMABORT_NOT_FOUND:
if (!ctask->sc) {
spin_unlock_bh(&session->lock);
success_unlocked:
debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt);
+ mutex_unlock(&session->eh_mutex);
return SUCCESS;
failed:
spin_unlock_bh(&session->lock);
failed_unlocked:
debug_scsi("abort failed [sc %lx itt 0x%x]\n", (long)sc, ctask->itt);
+ mutex_unlock(&session->eh_mutex);
return FAILED;
}
EXPORT_SYMBOL_GPL(iscsi_eh_abort);
session->state = ISCSI_STATE_FREE;
session->mgmtpool_max = ISCSI_MGMT_CMDS_MAX;
session->cmds_max = cmds_max;
- session->cmdsn = initial_cmdsn;
+ session->queued_cmdsn = session->cmdsn = initial_cmdsn;
session->exp_cmdsn = initial_cmdsn + 1;
session->max_cmdsn = initial_cmdsn + 1;
session->max_r2t = 1;
session->tt = iscsit;
+ mutex_init(&session->eh_mutex);
/* initialize SCSI PDU commands pool */
if (iscsi_pool_init(&session->cmdpool, session->cmds_max,
struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
struct module *owner = cls_session->transport->owner;
+ iscsi_unblock_session(cls_session);
scsi_remove_host(shost);
iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds);
kfree(conn->persistent_address);
__kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask,
sizeof(void*));
- if (session->leadconn == conn) {
+ if (session->leadconn == conn)
session->leadconn = NULL;
- /* no connections exits.. reset sequencing */
- session->cmdsn = session->max_cmdsn = session->exp_cmdsn = 1;
- }
spin_unlock_bh(&session->lock);
kfifo_free(conn->mgmtqueue);
spin_lock_bh(&session->lock);
conn->c_stage = ISCSI_CONN_STARTED;
session->state = ISCSI_STATE_LOGGED_IN;
+ session->queued_cmdsn = session->cmdsn;
switch(conn->stop_stage) {
case STOP_CONN_RECOVER:
{
int old_stop_stage;
+ mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
if (conn->stop_stage == STOP_CONN_TERM) {
spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
+ return;
+ }
+
+ /*
+ * The LLD either freed/unset the lock on us, or userspace called
+ * stop but did not create a proper connection (connection was never
+ * bound or it was unbound then stop was called).
+ */
+ if (!conn->recv_lock) {
+ spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
return;
}
old_stop_stage = conn->stop_stage;
conn->stop_stage = flag;
conn->c_stage = ISCSI_CONN_STOPPED;
- set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
spin_unlock_bh(&session->lock);
- scsi_flush_work(session->host);
+
+ iscsi_suspend_tx(conn);
write_lock_bh(conn->recv_lock);
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
fail_all_commands(conn);
flush_control_queues(session, conn);
spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
}
void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
projects / mirror_ubuntu-zesty-kernel.git / blobdiff