u8 ioc_number;
u8 who_init;
__le16 max_msix_vectors;
- __le16 max_outstanding_request;
+ __le16 max_outstanding_requests;
__le16 product_id;
__le16 ioc_request_frame_size;
__le16 reply_frame_size;
u8 sge_modifier_shift;
u8 protocol_flags;
__le16 max_sas_initiators;
- __le16 reserved2a;
+ __le16 max_data_length;
__le16 max_sas_expanders;
__le16 max_enclosures;
__le16 min_dev_handle;
u8 max_host_pd_ns_count;
u8 max_adv_host_pd_ns_count;
u8 max_raidpd_ns_count;
- u8 reserved5f;
+ u8 max_devices_per_throttle_group;
+ __le16 io_throttle_data_length;
+ __le16 max_io_throttle_group;
+ __le16 io_throttle_low;
+ __le16 io_throttle_high;
};
-
#define MPI3_IOCFACTS_CAPABILITY_NON_SUPERVISOR_MASK (0x80000000)
#define MPI3_IOCFACTS_CAPABILITY_SUPERVISOR_IOC (0x00000000)
-#define MPI3_IOCFACTS_CAPABILITY_NON_SUPERVISOR_IOC (0x10000000)
+#define MPI3_IOCFACTS_CAPABILITY_NON_SUPERVISOR_IOC (0x80000000)
+#define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_MASK (0x00000600)
+#define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_FIXED_THRESHOLD (0x00000000)
+#define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_OUTSTANDING_IO (0x00000200)
#define MPI3_IOCFACTS_CAPABILITY_COMPLETE_RESET_CAPABLE (0x00000100)
#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_TRACE_ENABLED (0x00000080)
#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_FW_ENABLED (0x00000040)
#define MPI3_IOCFACTS_PROTOCOL_NVME (0x0004)
#define MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
#define MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
+#define MPI3_IOCFACTS_MAX_DATA_LENGTH_NOT_REPORTED (0x0000)
#define MPI3_IOCFACTS_FLAGS_SIGNED_NVDATA_REQUIRED (0x00010000)
#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK (0x0000ff00)
#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT (8)
#define MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK (0x0000000f)
#define MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA (0x00000000)
#define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002)
+#define MPI3_IOCFACTS_IO_THROTTLE_DATA_LENGTH_NOT_REQUIRED (0x0000)
struct mpi3_mgmt_passthrough_request {
__le16 host_tag;
u8 ioc_use_only02;
#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_COALESCE_DISABLE (0x02)
#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_MASK (0x01)
#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_DISABLE (0x00)
#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE (0x01)
#define MPI3_EVENT_LOG_DATA (0x01)
#define MPI3_EVENT_CHANGE (0x02)
#define MPI3_EVENT_GPIO_INTERRUPT (0x04)
-#define MPI3_EVENT_TEMP_THRESHOLD (0x05)
#define MPI3_EVENT_CABLE_MGMT (0x06)
#define MPI3_EVENT_DEVICE_ADDED (0x07)
#define MPI3_EVENT_DEVICE_INFO_CHANGED (0x08)
u8 gpio_num;
u8 reserved01[3];
};
-
-struct mpi3_event_data_temp_threshold {
- __le16 status;
- u8 sensor_num;
- u8 reserved03;
- __le16 current_temperature;
- __le16 reserved06;
- __le32 reserved08;
- __le32 reserved0c;
-};
-
-#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_FATAL_THRESHOLD_EXCEEDED (0x0004)
-#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_CRITICAL_THRESHOLD_EXCEEDED (0x0002)
-#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_WARNING_THRESHOLD_EXCEEDED (0x0001)
struct mpi3_event_data_cable_management {
__le32 active_cable_power_requirement;
u8 status;
#define MPI3_CTRL_OP_LOOKUP_MAPPING (0x02)
#define MPI3_CTRL_OP_UPDATE_TIMESTAMP (0x04)
#define MPI3_CTRL_OP_GET_TIMESTAMP (0x05)
+#define MPI3_CTRL_OP_GET_IOC_CHANGE_COUNT (0x06)
+#define MPI3_CTRL_OP_CHANGE_PROFILE (0x07)
#define MPI3_CTRL_OP_REMOVE_DEVICE (0x10)
#define MPI3_CTRL_OP_CLOSE_PERSISTENT_CONNECTION (0x11)
#define MPI3_CTRL_OP_HIDDEN_ACK (0x12)
#define MPI3_CTRL_OP_CLEAR_DEVICE_COUNTERS (0x13)
-#define MPI3_CTRL_OP_SAS_SEND_PRIMITIVE (0x20)
+#define MPI3_CTRL_OP_SEND_SAS_PRIMITIVE (0x20)
#define MPI3_CTRL_OP_SAS_PHY_CONTROL (0x21)
#define MPI3_CTRL_OP_READ_INTERNAL_BUS (0x23)
#define MPI3_CTRL_OP_WRITE_INTERNAL_BUS (0x24)
#define MPI3_CTRL_OP_PCIE_LINK_CONTROL (0x30)
#define MPI3_CTRL_OP_LOOKUP_MAPPING_PARAM8_LOOKUP_METHOD_INDEX (0x00)
#define MPI3_CTRL_OP_UPDATE_TIMESTAMP_PARAM64_TIMESTAMP_INDEX (0x00)
+#define MPI3_CTRL_OP_CHANGE_PROFILE_PARAM8_PROFILE_ID_INDEX (0x00)
#define MPI3_CTRL_OP_REMOVE_DEVICE_PARAM16_DEVHANDLE_INDEX (0x00)
#define MPI3_CTRL_OP_CLOSE_PERSIST_CONN_PARAM16_DEVHANDLE_INDEX (0x00)
#define MPI3_CTRL_OP_HIDDEN_ACK_PARAM16_DEVHANDLE_INDEX (0x00)
#define MPI3_CTRL_OP_CLEAR_DEVICE_COUNTERS_PARAM16_DEVHANDLE_INDEX (0x00)
-#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PHY_INDEX (0x00)
-#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PRIMSEQ_INDEX (0x01)
-#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM32_PRIMITIVE_INDEX (0x00)
+#define MPI3_CTRL_OP_SEND_SAS_PRIM_PARAM8_PHY_INDEX (0x00)
+#define MPI3_CTRL_OP_SEND_SAS_PRIM_PARAM8_PRIMSEQ_INDEX (0x01)
+#define MPI3_CTRL_OP_SEND_SAS_PRIM_PARAM32_PRIMITIVE_INDEX (0x00)
#define MPI3_CTRL_OP_SAS_PHY_CONTROL_PARAM8_ACTION_INDEX (0x00)
#define MPI3_CTRL_OP_SAS_PHY_CONTROL_PARAM8_PHY_INDEX (0x01)
#define MPI3_CTRL_OP_READ_INTERNAL_BUS_PARAM64_ADDRESS_INDEX (0x00)
#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_PERSISTENT_ID_INDEX (1)
#define MPI3_CTRL_LOOKUP_METHOD_VALUE16_DEVH_INDEX (0)
#define MPI3_CTRL_GET_TIMESTAMP_VALUE64_TIMESTAMP_INDEX (0)
+#define MPI3_CTRL_GET_IOC_CHANGE_COUNT_VALUE16_CHANGECOUNT_INDEX (0)
#define MPI3_CTRL_READ_INTERNAL_BUS_VALUE32_VALUE_INDEX (0)
#define MPI3_CTRL_PRIMFLAGS_SINGLE (0x01)
#define MPI3_CTRL_PRIMFLAGS_TRIPLE (0x03)
projects / mirror_ubuntu-jammy-kernel.git / blobdiff