int reading;
if (IS_QLA82XX(ha)) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "Firmware dump not supported for ISP82xx\n"));
+ ql_dbg(ql_dbg_user, vha, 0x705b,
+ "Firmware dump not supported for ISP82xx\n");
return count;
}
if (!ha->fw_dump_reading)
break;
- qla_printk(KERN_INFO, ha,
+ ql_log(ql_log_info, vha, 0x705d,
"Firmware dump cleared on (%ld).\n", vha->host_no);
ha->fw_dump_reading = 0;
if (ha->fw_dumped && !ha->fw_dump_reading) {
ha->fw_dump_reading = 1;
- qla_printk(KERN_INFO, ha,
+ ql_log(ql_log_info, vha, 0x705e,
"Raw firmware dump ready for read on (%ld).\n",
vha->host_no);
}
}
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x705f,
"HBA not online, failing NVRAM update.\n");
return -EAGAIN;
}
ha->isp_ops->read_nvram(vha, (uint8_t *)ha->nvram, ha->nvram_base,
count);
+ ql_dbg(ql_dbg_user, vha, 0x7060,
+ "Setting ISP_ABORT_NEEDED\n");
/* NVRAM settings take effect immediately. */
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
ha->optrom_state = QLA_SWAITING;
- DEBUG2(qla_printk(KERN_INFO, ha,
+ ql_dbg(ql_dbg_user, vha, 0x7061,
"Freeing flash region allocation -- 0x%x bytes.\n",
- ha->optrom_region_size));
+ ha->optrom_region_size);
vfree(ha->optrom_buffer);
ha->optrom_buffer = NULL;
ha->optrom_state = QLA_SREADING;
ha->optrom_buffer = vmalloc(ha->optrom_region_size);
if (ha->optrom_buffer == NULL) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7062,
"Unable to allocate memory for optrom retrieval "
"(%x).\n", ha->optrom_region_size);
}
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "HBA not online, failing NVRAM update.\n");
+ ql_log(ql_log_warn, vha, 0x7063,
+ "HBA not online, failing NVRAM update.\n");
return -EAGAIN;
}
- DEBUG2(qla_printk(KERN_INFO, ha,
+ ql_dbg(ql_dbg_user, vha, 0x7064,
"Reading flash region -- 0x%x/0x%x.\n",
- ha->optrom_region_start, ha->optrom_region_size));
+ ha->optrom_region_start, ha->optrom_region_size);
memset(ha->optrom_buffer, 0, ha->optrom_region_size);
ha->isp_ops->read_optrom(vha, ha->optrom_buffer,
else if (IS_QLA25XX(ha) || IS_QLA8XXX_TYPE(ha))
valid = 1;
if (!valid) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7065,
"Invalid start region 0x%x/0x%x.\n", start, size);
return -EINVAL;
}
ha->optrom_state = QLA_SWRITING;
ha->optrom_buffer = vmalloc(ha->optrom_region_size);
if (ha->optrom_buffer == NULL) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7066,
"Unable to allocate memory for optrom update "
- "(%x).\n", ha->optrom_region_size);
+ "(%x)\n", ha->optrom_region_size);
ha->optrom_state = QLA_SWAITING;
return count;
}
- DEBUG2(qla_printk(KERN_INFO, ha,
+ ql_dbg(ql_dbg_user, vha, 0x7067,
"Staging flash region write -- 0x%x/0x%x.\n",
- ha->optrom_region_start, ha->optrom_region_size));
+ ha->optrom_region_start, ha->optrom_region_size);
memset(ha->optrom_buffer, 0, ha->optrom_region_size);
break;
break;
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7068,
"HBA not online, failing flash update.\n");
return -EAGAIN;
}
- DEBUG2(qla_printk(KERN_INFO, ha,
+ ql_dbg(ql_dbg_user, vha, 0x7069,
"Writing flash region -- 0x%x/0x%x.\n",
- ha->optrom_region_start, ha->optrom_region_size));
+ ha->optrom_region_start, ha->optrom_region_size);
ha->isp_ops->write_optrom(vha, ha->optrom_buffer,
ha->optrom_region_start, ha->optrom_region_size);
return 0;
if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x706a,
"HBA not online, failing VPD update.\n");
return -EAGAIN;
}
tmp_data = vmalloc(256);
if (!tmp_data) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x706b,
"Unable to allocate memory for VPD information update.\n");
goto done;
}
ha->sfp_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->sfp_data_dma);
if (!ha->sfp_data) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x706c,
"Unable to allocate memory for SFP read-data.\n");
return 0;
}
rval = qla2x00_read_sfp(vha, ha->sfp_data_dma, ha->sfp_data,
addr, offset, SFP_BLOCK_SIZE, 0);
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x706d,
"Unable to read SFP data (%x/%x/%x).\n", rval,
addr, offset);
+
count = 0;
break;
}
type = simple_strtol(buf, NULL, 10);
switch (type) {
case 0x2025c:
- qla_printk(KERN_INFO, ha,
- "Issuing ISP reset on (%ld).\n", vha->host_no);
+ ql_log(ql_log_info, vha, 0x706e,
+ "Issuing ISP reset.\n");
scsi_block_requests(vha->host);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
if (!IS_QLA81XX(ha))
break;
- qla_printk(KERN_INFO, ha,
- "Issuing MPI reset on (%ld).\n", vha->host_no);
+ ql_log(ql_log_info, vha, 0x706f,
+ "Issuing MPI reset.\n");
/* Make sure FC side is not in reset */
qla2x00_wait_for_hba_online(vha);
/* Issue MPI reset */
scsi_block_requests(vha->host);
if (qla81xx_restart_mpi_firmware(vha) != QLA_SUCCESS)
- qla_printk(KERN_WARNING, ha,
- "MPI reset failed on (%ld).\n", vha->host_no);
+ ql_log(ql_log_warn, vha, 0x7070,
+ "MPI reset failed.\n");
scsi_unblock_requests(vha->host);
break;
case 0x2025e:
if (!IS_QLA82XX(ha) || vha != base_vha) {
- qla_printk(KERN_INFO, ha,
- "FCoE ctx reset not supported for host%ld.\n",
- vha->host_no);
+ ql_log(ql_log_info, vha, 0x7071,
+ "FCoE ctx reset no supported.\n");
return count;
}
- qla_printk(KERN_INFO, ha,
- "Issuing FCoE CTX reset on host%ld.\n", vha->host_no);
+ ql_log(ql_log_info, vha, 0x7072,
+ "Issuing FCoE ctx reset.\n");
set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
qla2x00_wait_for_fcoe_ctx_reset(vha);
ha->edc_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->edc_data_dma);
if (!ha->edc_data) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "Unable to allocate memory for EDC write.\n"));
+ ql_log(ql_log_warn, vha, 0x7073,
+ "Unable to allocate memory for EDC write.\n");
return 0;
}
}
rval = qla2x00_write_sfp(vha, ha->edc_data_dma, ha->edc_data,
dev, adr, len, opt);
if (rval != QLA_SUCCESS) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "Unable to write EDC (%x) %02x:%02x:%04x:%02x:%02x.\n",
- rval, dev, adr, opt, len, buf[8]));
+ ql_log(ql_log_warn, vha, 0x7074,
+ "Unable to write EDC (%x) %02x:%04x:%02x:%02x\n",
+ rval, dev, adr, opt, len, buf[8]);
return 0;
}
ha->edc_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
&ha->edc_data_dma);
if (!ha->edc_data) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "Unable to allocate memory for EDC status.\n"));
+ ql_log(ql_log_warn, vha, 0x708c,
+ "Unable to allocate memory for EDC status.\n");
return 0;
}
}
rval = qla2x00_read_sfp(vha, ha->edc_data_dma, ha->edc_data,
dev, adr, len, opt);
if (rval != QLA_SUCCESS) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "Unable to write EDC status (%x) %02x:%02x:%04x:%02x.\n",
- rval, dev, adr, opt, len));
+ ql_log(ql_log_info, vha, 0x7075,
+ "Unable to write EDC status (%x) %02x:%04x:%02x.\n",
+ rval, dev, adr, opt, len);
return 0;
}
ha->xgmac_data = dma_alloc_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
&ha->xgmac_data_dma, GFP_KERNEL);
if (!ha->xgmac_data) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7076,
"Unable to allocate memory for XGMAC read-data.\n");
return 0;
}
rval = qla2x00_get_xgmac_stats(vha, ha->xgmac_data_dma,
XGMAC_DATA_SIZE, &actual_size);
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7077,
"Unable to read XGMAC data (%x).\n", rval);
count = 0;
}
ha->dcbx_tlv = dma_alloc_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
&ha->dcbx_tlv_dma, GFP_KERNEL);
if (!ha->dcbx_tlv) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7078,
"Unable to allocate memory for DCBX TLV read-data.\n");
return 0;
}
rval = qla2x00_get_dcbx_params(vha, ha->dcbx_tlv_dma,
DCBX_TLV_DATA_SIZE);
if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Unable to read DCBX TLV data (%x).\n", rval);
+ ql_log(ql_log_warn, vha, 0x7079,
+ "Unable to read DCBX TLV (%x).\n", rval);
count = 0;
}
ret = sysfs_create_bin_file(&host->shost_gendev.kobj,
iter->attr);
if (ret)
- qla_printk(KERN_INFO, vha->hw,
- "Unable to create sysfs %s binary attribute "
- "(%d).\n", iter->name, ret);
+ ql_log(ql_log_warn, vha, 0x00f3,
+ "Unable to create sysfs %s binary attribute (%d).\n",
+ iter->name, ret);
+ else
+ ql_dbg(ql_dbg_init, vha, 0x00f4,
+ "Successfully created sysfs %s binary attribure.\n",
+ iter->name);
}
}
return -EPERM;
if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x707a,
"Abort ISP active -- ignoring beacon request.\n");
return -EBUSY;
}
temp = frac = 0;
if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
- DEBUG2_3_11(printk(KERN_WARNING
- "%s(%ld): isp reset in progress.\n",
- __func__, vha->host_no));
+ ql_log(ql_log_warn, vha, 0x707b,
+ "ISP reset active.\n");
else if (!vha->hw->flags.eeh_busy)
rval = qla2x00_get_thermal_temp(vha, &temp, &frac);
if (rval != QLA_SUCCESS)
if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
- DEBUG2_3_11(printk("%s(%ld): isp reset in progress.\n",
- __func__, vha->host_no));
+ ql_log(ql_log_warn, vha, 0x707c,
+ "ISP reset active.\n");
else if (!vha->hw->flags.eeh_busy)
rval = qla2x00_get_firmware_state(vha, state);
if (rval != QLA_SUCCESS)
stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma);
if (stats == NULL) {
- DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
- __func__, base_vha->host_no));
+ ql_log(ql_log_warn, vha, 0x707d,
+ "Failed to allocate memory for stats.\n");
goto done;
}
memset(stats, 0, DMA_POOL_SIZE);
ret = qla24xx_vport_create_req_sanity_check(fc_vport);
if (ret) {
- DEBUG15(printk("qla24xx_vport_create_req_sanity_check failed, "
- "status %x\n", ret));
+ ql_log(ql_log_warn, vha, 0x707e,
+ "Vport sanity check failed, status %x\n", ret);
return (ret);
}
vha = qla24xx_create_vhost(fc_vport);
if (vha == NULL) {
- DEBUG15(printk ("qla24xx_create_vhost failed, vha = %p\n",
- vha));
+ ql_log(ql_log_warn, vha, 0x707f, "Vport create host failed.\n");
return FC_VPORT_FAILED;
}
if (disable) {
atomic_set(&vha->vp_state, VP_FAILED);
/* ready to create vport */
- qla_printk(KERN_INFO, vha->hw, "VP entry id %d assigned.\n",
- vha->vp_idx);
+ ql_log(ql_log_info, vha, 0x7080,
+ "VP entry id %d assigned.\n", vha->vp_idx);
/* initialized vport states */
atomic_set(&vha->loop_state, LOOP_DOWN);
if (atomic_read(&base_vha->loop_state) == LOOP_DOWN ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
/* Don't retry or attempt login of this virtual port */
- DEBUG15(printk ("scsi(%ld): pport loop_state is not UP.\n",
- base_vha->host_no));
+ ql_dbg(ql_dbg_user, vha, 0x7081,
+ "Vport loop state is not UP.\n");
atomic_set(&vha->loop_state, LOOP_DEAD);
if (!disable)
fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
vha->flags.difdix_supported = 1;
- DEBUG18(qla_printk(KERN_INFO, ha,
- "Registering for DIF/DIX type 1 and 3"
- " protection.\n"));
+ ql_dbg(ql_dbg_user, vha, 0x7082,
+ "Registered for DIF/DIX type 1 and 3 protection.\n");
scsi_host_set_prot(vha->host,
SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
if (scsi_add_host_with_dma(vha->host, &fc_vport->dev,
&ha->pdev->dev)) {
- DEBUG15(printk("scsi(%ld): scsi_add_host failure for VP[%d].\n",
- vha->host_no, vha->vp_idx));
+ ql_dbg(ql_dbg_user, vha, 0x7083,
+ "scsi_add_host failure for VP[%d].\n", vha->vp_idx);
goto vport_create_failed_2;
}
if (ha->flags.cpu_affinity_enabled) {
req = ha->req_q_map[1];
+ ql_dbg(ql_dbg_multiq, vha, 0xc000,
+ "Request queue %p attached with "
+ "VP[%d], cpu affinity =%d\n",
+ req, vha->vp_idx, ha->flags.cpu_affinity_enabled);
goto vport_queue;
} else if (ql2xmaxqueues == 1 || !ha->npiv_info)
goto vport_queue;
ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, 0,
qos);
if (!ret)
- qla_printk(KERN_WARNING, ha,
- "Can't create request queue for vp_idx:%d\n",
- vha->vp_idx);
+ ql_log(ql_log_warn, vha, 0x7084,
+ "Can't create request queue for VP[%d]\n",
+ vha->vp_idx);
else {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "Request Que:%d (QoS: %d) created for vp_idx:%d\n",
- ret, qos, vha->vp_idx));
+ ql_dbg(ql_dbg_multiq, vha, 0xc001,
+ "Request Que:%d Q0s: %d) created for VP[%d]\n",
+ ret, qos, vha->vp_idx);
+ ql_dbg(ql_dbg_user, vha, 0x7085,
+ "Request Que:%d Q0s: %d) created for VP[%d]\n",
+ ret, qos, vha->vp_idx);
req = ha->req_q_map[ret];
}
}
if (vha->timer_active) {
qla2x00_vp_stop_timer(vha);
- DEBUG15(printk(KERN_INFO "scsi(%ld): timer for the vport[%d]"
- " = %p has stopped\n", vha->host_no, vha->vp_idx, vha));
+ ql_dbg(ql_dbg_user, vha, 0x7086,
+ "Timer for the VP[%d] has stopped\n", vha->vp_idx);
}
/* No pending activities shall be there on the vha now */
- DEBUG(msleep(random32()%10)); /* Just to see if something falls on
+ if (ql2xextended_error_logging & ql_dbg_user)
+ msleep(random32()%10); /* Just to see if something falls on
* the net we have placed below */
BUG_ON(atomic_read(&vha->vref_count));
if (vha->req->id && !ha->flags.cpu_affinity_enabled) {
if (qla25xx_delete_req_que(vha, vha->req) != QLA_SUCCESS)
- qla_printk(KERN_WARNING, ha,
- "Queue delete failed.\n");
+ ql_log(ql_log_warn, vha, 0x7087,
+ "Queue delete failed.\n");
}
scsi_host_put(vha->host);
- qla_printk(KERN_INFO, ha, "vport %d deleted\n", id);
+ ql_log(ql_log_info, vha, 0x7088, "VP[%d] deleted.\n", id);
return 0;
}
projects / mirror_ubuntu-bionic-kernel.git / blobdiff