/*
* SRB allocation cache
*/
-char srb_cachep_name[16];
-kmem_cache_t *srb_cachep;
-
-/*
- * Stats for all adpaters.
- */
-struct _qla2x00stats qla2x00_stats;
+static kmem_cache_t *srb_cachep;
/*
* Ioctl related information.
*/
-int num_hosts;
-int apiHBAInstance;
-
-/*
- * Module parameter information and variables
- */
-int ql2xmaxqdepth;
-module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xmaxqdepth,
- "Maximum queue depth to report for target devices.");
+static int num_hosts;
int ql2xlogintimeout = 20;
module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
"Maximum number of command retries to a port that returns"
"a PORT-DOWN status.");
-int ql2xretrycount = 20;
-module_param(ql2xretrycount, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xretrycount,
- "Maximum number of mid-layer retries allowed for a command. "
- "Default value is 20, ");
-
int ql2xplogiabsentdevice;
module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xplogiabsentdevice,
"ZIO: Waiting time for Firmware before it generates an "
"interrupt to the host to notify completion of request.");
-int ConfigRequired;
-module_param(ConfigRequired, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(ConfigRequired,
- "If 1, then only configured devices passed in through the"
- "ql2xopts parameter will be presented to the OS");
-
-int Bind = BIND_BY_PORT_NAME;
-module_param(Bind, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(Bind,
- "Target persistent binding method: "
- "0 by Portname (default); 1 by PortID; 2 by Nodename. ");
-
-int ql2xsuspendcount = SUSPEND_COUNT;
-module_param(ql2xsuspendcount, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(ql2xsuspendcount,
- "Number of 6-second suspend iterations to perform while a "
- "target returns a <NOT READY> status. Default is 10 "
- "iterations.");
-
int ql2xloginretrycount = 0;
module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xloginretrycount,
sp->fcport = fcport;
sp->cmd = cmd;
sp->flags = 0;
- sp->err_id = 0;
CMD_SP(cmd) = (void *)sp;
cmd->scsi_done = done;
while ((!atomic_read(&ha->loop_down_timer) &&
atomic_read(&ha->loop_state) == LOOP_DOWN) ||
- test_bit(CFG_ACTIVE, &ha->cfg_flags) ||
atomic_read(&ha->loop_state) != LOOP_READY) {
msleep(1000);
if (time_after_eq(jiffies, loop_timeout)) {
serial = cmd->serial_number;
/* Check active list for command command. */
- spin_unlock_irq(ha->host->host_lock);
spin_lock_irqsave(&ha->hardware_lock, flags);
for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
sp = ha->outstanding_cmds[i];
"%x.\n", ha->host_no, id, lun, serial, ret);
}
}
- spin_lock_irq(ha->host->host_lock);
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
- spin_unlock_irq(ha->host->host_lock);
-
- if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
- spin_lock_irq(ha->host->host_lock);
+ if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
goto eh_dev_reset_done;
- }
if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
if (qla2x00_device_reset(ha, fcport) == 0)
"scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no, id, lun);
eh_dev_reset_done:
- spin_lock_irq(ha->host->host_lock);
-
return ret;
}
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
- spin_unlock_irq(ha->host->host_lock);
-
if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
DEBUG2(printk("%s failed:board disabled\n",__func__));
goto eh_bus_reset_done;
qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
(ret == FAILED) ? "failed" : "succeded");
- spin_lock_irq(ha->host->host_lock);
-
return ret;
}
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
- spin_unlock_irq(ha->host->host_lock);
-
if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
goto eh_host_reset_lock;
ret = SUCCESS;
eh_host_reset_lock:
- spin_lock_irq(ha->host->host_lock);
-
qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
(ret == FAILED) ? "failed" : "succeded");
spin_lock_init(&ha->hardware_lock);
- /* 4.23 Initialize /proc/scsi/qla2x00 counters */
- ha->actthreads = 0;
- ha->qthreads = 0;
- ha->total_isr_cnt = 0;
- ha->total_isp_aborts = 0;
- ha->total_lip_cnt = 0;
- ha->total_dev_errs = 0;
- ha->total_ios = 0;
- ha->total_bytes = 0;
-
ha->prev_topology = 0;
ha->ports = MAX_BUSES;
if (IS_QLA2100(ha)) {
- ha->max_targets = MAX_TARGETS_2100;
+ host->max_id = MAX_TARGETS_2100;
ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
ha->request_q_length = REQUEST_ENTRY_CNT_2100;
ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
host->sg_tablesize = 32;
} else if (IS_QLA2200(ha)) {
- ha->max_targets = MAX_TARGETS_2200;
+ host->max_id = MAX_TARGETS_2200;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
ha->request_q_length = REQUEST_ENTRY_CNT_2200;
ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
} else /*if (IS_QLA2300(ha))*/ {
- ha->max_targets = MAX_TARGETS_2200;
+ host->max_id = MAX_TARGETS_2200;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
ha->request_q_length = REQUEST_ENTRY_CNT_2200;
ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
host->unique_id = ha->instance;
host->max_cmd_len = MAX_CMDSZ;
host->max_channel = ha->ports - 1;
- host->max_id = ha->max_targets;
- host->max_lun = ha->max_luns;
+ host->max_lun = MAX_LUNS;
host->transportt = qla2xxx_transport_template;
if (scsi_add_host(host, &pdev->dev))
goto probe_alloc_failed;
qla2x00_module_init(void)
{
/* Allocate cache for SRBs. */
- sprintf(srb_cachep_name, "qla2xxx_srbs");
- srb_cachep = kmem_cache_create(srb_cachep_name, sizeof(srb_t), 0,
+ srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
SLAB_HWCACHE_ALIGN, NULL, NULL);
if (srb_cachep == NULL) {
printk(KERN_ERR
static void __exit
qla2x00_module_exit(void)
{
- /* Free SRBs cache. */
- if (srb_cachep != NULL) {
- if (kmem_cache_destroy(srb_cachep) != 0) {
- printk(KERN_ERR
- "qla2xxx: Unable to free SRB cache...Memory pools "
- "still active?\n");
- }
- srb_cachep = NULL;
- }
-
+ kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
}
projects / mirror_ubuntu-kernels.git / blobdiff