spi: mediatek: Don't modify spi_transfer when transfer.

[mirror_ubuntu-focal-kernel.git] / drivers / spi / spi-dw.c

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index ac2eb89ef7a5a0616fe915ec96453ac441f589be..3e205ab60cd47243adb736e548f639dafb3e1c03 100644 (file)
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -308,15 +308,10 @@ static int dw_spi_transfer_one(struct spi_controller *master,
                dws->current_freq = transfer->speed_hz;
                spi_set_clk(dws, chip->clk_div);
        }
-       if (transfer->bits_per_word == 8) {
-               dws->n_bytes = 1;
-               dws->dma_width = 1;
-       } else if (transfer->bits_per_word == 16) {
-               dws->n_bytes = 2;
-               dws->dma_width = 2;
-       } else {
-               return -EINVAL;
-       }
+
+       dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
+       dws->dma_width = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
+
        /* Default SPI mode is SCPOL = 0, SCPH = 0 */
        cr0 = (transfer->bits_per_word - 1)
                | (chip->type << SPI_FRF_OFFSET)
@@ -496,7 +491,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
        }
 
        master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP;
-       master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+       master->bits_per_word_mask =  SPI_BPW_RANGE_MASK(4, 16);
        master->bus_num = dws->bus_num;
        master->num_chipselect = dws->num_cs;
        master->setup = dw_spi_setup;
@@ -572,13 +567,8 @@ EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
 
 int dw_spi_resume_host(struct dw_spi *dws)
 {
-       int ret;
-
        spi_hw_init(&dws->master->dev, dws);
-       ret = spi_controller_resume(dws->master);
-       if (ret)
-               dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
-       return ret;
+       return spi_controller_resume(dws->master);
 }
 EXPORT_SYMBOL_GPL(dw_spi_resume_host);