#include <linux/kernel.h>
#include <wlc_cfg.h>
#include <bcmdefs.h>
-#include <linuxver.h>
-#include <bcmdefs.h>
#include <osl.h>
#include <bcmutils.h>
#include <siutils.h>
#include <bcmendian.h>
#include <wlioctl.h>
+#include <sbhndpio.h>
#include <sbhnddma.h>
#include <hnddma.h>
#include <d11.h>
#include <wlc_rate.h>
#include <wlc_pub.h>
#include <wlc_key.h>
+#include <wlc_event.h>
#include <wlc_mac80211.h>
#include <wlc_phy_hal.h>
#include <wlc_antsel.h>
#include <net/mac80211.h>
#include <wlc_ampdu.h>
#include <wl_export.h>
+#include <wl_dbg.h>
-#ifdef WLC_HIGH_ONLY
-#include <bcm_rpc_tp.h>
-#include <wlc_rpctx.h>
-#endif
#define AMPDU_MAX_MPDU 32 /* max number of mpdus in an ampdu */
#define AMPDU_NUM_MPDU_LEGACY 16 /* max number of mpdus in an ampdu to a legacy */
/* AMPDU module specific state */
struct ampdu_info {
- wlc_info_t *wlc; /* pointer to main wlc structure */
+ struct wlc_info *wlc; /* pointer to main wlc structure */
int scb_handle; /* scb cubby handle to retrieve data from scb */
u8 ini_enable[AMPDU_MAX_SCB_TID]; /* per-tid initiator enable/disable of ampdu */
u8 ba_tx_wsize; /* Tx ba window size (in pdu) */
*/
wlc_fifo_info_t fifo_tb[NUM_FFPLD_FIFO]; /* table of fifo infos */
-#ifdef WLC_HIGH_ONLY
- void *p;
- tx_status_t txs;
- bool waiting_status; /* To help sanity checks */
-#endif
};
#define AMPDU_CLEANUPFLAG_RX (0x1)
#define SCB_AMPDU_INI(scb_ampdu, tid) (&(scb_ampdu->ini[tid]))
static void wlc_ffpld_init(ampdu_info_t *ampdu);
-static int wlc_ffpld_check_txfunfl(wlc_info_t *wlc, int f);
+static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int f);
static void wlc_ffpld_calc_mcs2ampdu_table(ampdu_info_t *ampdu, int f);
static scb_ampdu_tid_ini_t *wlc_ampdu_init_tid_ini(ampdu_info_t *ampdu,
#define wlc_ampdu_txflowcontrol(a, b, c) do {} while (0)
static void wlc_ampdu_dotxstatus_complete(ampdu_info_t *ampdu, struct scb *scb,
- void *p, tx_status_t *txs,
- u32 frmtxstatus,
- u32 frmtxstatus2);
+ struct sk_buff *p, tx_status_t *txs,
+ u32 frmtxstatus, u32 frmtxstatus2);
-static inline u16 pkt_txh_seqnum(wlc_info_t *wlc, void *p)
+static inline u16 pkt_txh_seqnum(struct wlc_info *wlc, struct sk_buff *p)
{
d11txh_t *txh;
struct dot11_header *h;
- txh = (d11txh_t *) PKTDATA(p);
+ txh = (d11txh_t *) p->data;
h = (struct dot11_header *)((u8 *) (txh + 1) + D11_PHY_HDR_LEN);
return ltoh16(h->seq) >> SEQNUM_SHIFT;
}
-ampdu_info_t *wlc_ampdu_attach(wlc_info_t *wlc)
+ampdu_info_t *wlc_ampdu_attach(struct wlc_info *wlc)
{
ampdu_info_t *ampdu;
int i;
ampdu->rx_factor = AMPDU_RX_FACTOR_32K;
else
ampdu->rx_factor = AMPDU_RX_FACTOR_64K;
-#ifdef WLC_HIGH_ONLY
- /* Restrict to smaller rcv size for BMAC dongle */
- ampdu->rx_factor = AMPDU_RX_FACTOR_32K;
-#endif
ampdu->retry_limit = AMPDU_DEF_RETRY_LIMIT;
ampdu->rr_retry_limit = AMPDU_DEF_RR_RETRY_LIMIT;
* Return 1 if pre-loading not active, -1 if not an underflow event,
* 0 if pre-loading module took care of the event.
*/
-static int wlc_ffpld_check_txfunfl(wlc_info_t *wlc, int fid)
+static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int fid)
{
ampdu_info_t *ampdu = wlc->ampdu;
u32 phy_rate = MCS_RATE(FFPLD_MAX_MCS, true, false);
}
static void BCMFASTPATH
-wlc_ampdu_agg(ampdu_info_t *ampdu, struct scb *scb, void *p, uint prec)
+wlc_ampdu_agg(ampdu_info_t *ampdu, struct scb *scb, struct sk_buff *p,
+ uint prec)
{
scb_ampdu_t *scb_ampdu;
scb_ampdu_tid_ini_t *ini;
- u8 tid = (u8) PKTPRIO(p);
+ u8 tid = (u8) (p->priority);
scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb);
}
int BCMFASTPATH
-wlc_sendampdu(ampdu_info_t *ampdu, wlc_txq_info_t *qi, void **pdu, int prec)
+wlc_sendampdu(ampdu_info_t *ampdu, wlc_txq_info_t *qi, struct sk_buff **pdu,
+ int prec)
{
- wlc_info_t *wlc;
- osl_t *osh;
- void *p, *pkt[AMPDU_MAX_MPDU];
+ struct wlc_info *wlc;
+ struct osl_info *osh;
+ struct sk_buff *p, *pkt[AMPDU_MAX_MPDU];
u8 tid, ndelim;
int err = 0;
u8 preamble_type = WLC_GF_PREAMBLE;
ASSERT(p);
- tid = (u8) PKTPRIO(p);
+ tid = (u8) (p->priority);
ASSERT(tid < AMPDU_MAX_SCB_TID);
f = ampdu->fifo_tb + prio2fifo[tid];
/* pkt is good to be aggregated */
ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
- txh = (d11txh_t *) PKTDATA(p);
+ txh = (d11txh_t *) p->data;
plcp = (u8 *) (txh + 1);
h = (struct dot11_header *)(plcp + D11_PHY_HDR_LEN);
seq = ltoh16(h->seq) >> SEQNUM_SHIFT;
if (p) {
if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) &&
- ((u8) PKTPRIO(p) == tid)) {
+ ((u8) (p->priority) == tid)) {
plen =
pkttotlen(osh, p) + AMPDU_MAX_MPDU_OVERHEAD;
WLCNTADD(ampdu->cnt->txmpdu, count);
/* patch up the last txh */
- txh = (d11txh_t *) PKTDATA(pkt[count - 1]);
+ txh = (d11txh_t *) pkt[count - 1]->data;
mcl = ltoh16(txh->MacTxControlLow);
mcl &= ~TXC_AMPDU_MASK;
mcl |= (TXC_AMPDU_LAST << TXC_AMPDU_SHIFT);
ampdu_len -= roundup(len, 4) - len;
/* patch up the first txh & plcp */
- txh = (d11txh_t *) PKTDATA(pkt[0]);
+ txh = (d11txh_t *) pkt[0]->data;
plcp = (u8 *) (txh + 1);
WLC_SET_MIMO_PLCP_LEN(plcp, ampdu_len);
if (frameid & TXFID_RATE_PROBE_MASK) {
WL_ERROR(("%s: XXX what to do with TXFID_RATE_PROBE_MASK!?\n", __func__));
}
-#ifdef WLC_HIGH_ONLY
- if (wlc->rpc_agg & BCM_RPC_TP_HOST_AGG_AMPDU)
- bcm_rpc_tp_agg_set(bcm_rpc_tp_get(wlc->rpc),
- BCM_RPC_TP_HOST_AGG_AMPDU, true);
-#endif
for (i = 0; i < count; i++)
wlc_txfifo(wlc, fifo, pkt[i], i == (count - 1),
ampdu->txpkt_weight);
-#ifdef WLC_HIGH_ONLY
- if (wlc->rpc_agg & BCM_RPC_TP_HOST_AGG_AMPDU)
- bcm_rpc_tp_agg_set(bcm_rpc_tp_get(wlc->rpc),
- BCM_RPC_TP_HOST_AGG_AMPDU, false);
-#endif
}
/* endif (count) */
}
void BCMFASTPATH
-wlc_ampdu_dotxstatus(ampdu_info_t *ampdu, struct scb *scb, void *p,
+wlc_ampdu_dotxstatus(ampdu_info_t *ampdu, struct scb *scb, struct sk_buff *p,
tx_status_t *txs)
{
scb_ampdu_t *scb_ampdu;
- wlc_info_t *wlc = ampdu->wlc;
+ struct wlc_info *wlc = ampdu->wlc;
scb_ampdu_tid_ini_t *ini;
u32 s1 = 0, s2 = 0;
struct ieee80211_tx_info *tx_info;
ASSERT(txs->status & TX_STATUS_AMPDU);
scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb);
ASSERT(scb_ampdu);
- ini = SCB_AMPDU_INI(scb_ampdu, PKTPRIO(p));
+ ini = SCB_AMPDU_INI(scb_ampdu, p->priority);
ASSERT(ini->scb == scb);
/* BMAC_NOTE: For the split driver, second level txstatus comes later
* call the first one
*/
if (txs->status & TX_STATUS_ACK_RCV) {
-#ifdef WLC_LOW
u8 status_delay = 0;
/* wait till the next 8 bytes of txstatus is available */
ASSERT(!(s1 & TX_STATUS_INTERMEDIATE));
ASSERT(s1 & TX_STATUS_AMPDU);
s2 = R_REG(wlc->osh, &wlc->regs->frmtxstatus2);
-#else /* WLC_LOW */
-
- /* Store the relevant information in ampdu structure */
- WL_AMPDU_TX(("wl%d: wlc_ampdu_dotxstatus: High Recvd\n",
- wlc->pub->unit));
-
- ASSERT(!ampdu->p);
- ampdu->p = p;
- bcopy(txs, &du->txs, sizeof(tx_status_t));
- ampdu->waiting_status = true;
- return;
-#endif /* WLC_LOW */
}
wlc_ampdu_dotxstatus_complete(ampdu, scb, p, txs, s1, s2);
wlc_ampdu_txflowcontrol(wlc, scb_ampdu, ini);
}
-#ifdef WLC_HIGH_ONLY
-void wlc_ampdu_txstatus_complete(ampdu_info_t *ampdu, u32 s1, u32 s2)
-{
- WL_AMPDU_TX(("wl%d: wlc_ampdu_txstatus_complete: High Recvd 0x%x 0x%x p:%p\n", ampdu->wlc->pub->unit, s1, s2, ampdu->p));
-
- ASSERT(ampdu->waiting_status);
-
- /* The packet may have been freed if the SCB went away, if so, then still free the
- * DMA chain
- */
- if (ampdu->p) {
- struct ieee80211_tx_info *tx_info;
- struct scb *scb;
-
- tx_info = IEEE80211_SKB_CB(ampdu->p);
- scb = (struct scb *)tx_info->control.sta->drv_priv;
-
- wlc_ampdu_dotxstatus_complete(ampdu, scb, ampdu->p, &du->txs,
- s1, s2);
- ampdu->p = NULL;
- }
-
- ampdu->waiting_status = false;
-}
-#endif /* WLC_HIGH_ONLY */
-void rate_status(wlc_info_t *wlc, struct ieee80211_tx_info *tx_info,
- tx_status_t *txs, u8 mcs);
-
void
-rate_status(wlc_info_t *wlc, struct ieee80211_tx_info *tx_info,
+rate_status(struct wlc_info *wlc, struct ieee80211_tx_info *tx_info,
tx_status_t *txs, u8 mcs)
{
struct ieee80211_tx_rate *txrate = tx_info->status.rates;
}
}
-extern void wlc_txq_enq(wlc_info_t *wlc, struct scb *scb, void *sdu,
- uint prec);
-
#define SHORTNAME "AMPDU status"
static void BCMFASTPATH
-wlc_ampdu_dotxstatus_complete(ampdu_info_t *ampdu, struct scb *scb, void *p,
- tx_status_t *txs, u32 s1, u32 s2)
+wlc_ampdu_dotxstatus_complete(ampdu_info_t *ampdu, struct scb *scb,
+ struct sk_buff *p, tx_status_t *txs,
+ u32 s1, u32 s2)
{
scb_ampdu_t *scb_ampdu;
- wlc_info_t *wlc = ampdu->wlc;
+ struct wlc_info *wlc = ampdu->wlc;
scb_ampdu_tid_ini_t *ini;
u8 bitmap[8], queue, tid;
d11txh_t *txh;
#ifdef BCMDBG
u8 hole[AMPDU_MAX_MPDU];
- bzero(hole, sizeof(hole));
+ memset(hole, 0, sizeof(hole));
#endif
ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
scb_ampdu = SCB_AMPDU_CUBBY(ampdu, scb);
ASSERT(scb_ampdu);
- tid = (u8) PKTPRIO(p);
+ tid = (u8) (p->priority);
ini = SCB_AMPDU_INI(scb_ampdu, tid);
retry_limit = ampdu->retry_limit_tid[tid];
ASSERT(ini->scb == scb);
- bzero(bitmap, sizeof(bitmap));
+ memset(bitmap, 0, sizeof(bitmap));
queue = txs->frameid & TXFID_QUEUE_MASK;
ASSERT(queue < AC_COUNT);
if (wlc_ffpld_check_txfunfl(wlc, prio2fifo[tid])
> 0) {
tx_error = true;
-#ifdef WLC_HIGH_ONLY
- /* With BMAC, TX Underflows should not happen */
- WL_ERROR(("wl%d: BMAC TX Underflow?",
- wlc->pub->unit));
-#endif
}
}
} else if (txs->phyerr) {
#ifdef BCMDBG
if (WL_ERROR_ON()) {
prpkt("txpkt (AMPDU)", wlc->osh, p);
- wlc_print_txdesc((d11txh_t *) PKTDATA(p));
+ wlc_print_txdesc((d11txh_t *) p->data);
wlc_print_txstatus(txs);
}
#endif /* BCMDBG */
while (p) {
tx_info = IEEE80211_SKB_CB(p);
ASSERT(tx_info->flags & IEEE80211_TX_CTL_AMPDU);
- txh = (d11txh_t *) PKTDATA(p);
+ txh = (d11txh_t *) p->data;
mcl = ltoh16(txh->MacTxControlLow);
plcp = (u8 *) (txh + 1);
h = (struct dot11_header *)(plcp + D11_PHY_HDR_LEN);
status & TX_STATUS_FRM_RTX_MASK) >>
TX_STATUS_FRM_RTX_SHIFT;
- PKTPULL(p, D11_PHY_HDR_LEN);
- PKTPULL(p, D11_TXH_LEN);
+ skb_pull(p, D11_PHY_HDR_LEN);
+ skb_pull(p, D11_TXH_LEN);
ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw,
p);
ieee80211_tx_info_clear_status(tx_info);
tx_info->flags |=
IEEE80211_TX_STAT_AMPDU_NO_BACK;
- PKTPULL(p, D11_PHY_HDR_LEN);
- PKTPULL(p, D11_TXH_LEN);
+ skb_pull(p, D11_PHY_HDR_LEN);
+ skb_pull(p, D11_TXH_LEN);
WL_ERROR(("%s: BA Timeout, seq %d, in_transit %d\n", SHORTNAME, seq, ini->tx_in_transit));
ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw,
p);
int wlc_ampdu_set(ampdu_info_t *ampdu, bool on)
{
- wlc_info_t *wlc = ampdu->wlc;
+ struct wlc_info *wlc = ampdu->wlc;
wlc->pub->_ampdu = false;
return 0;
}
-void wlc_ampdu_macaddr_upd(wlc_info_t *wlc)
+void wlc_ampdu_macaddr_upd(struct wlc_info *wlc)
{
char template[T_RAM_ACCESS_SZ * 2];
/* driver needs to write the ta in the template; ta is at offset 16 */
- bzero(template, sizeof(template));
+ memset(template, 0, sizeof(template));
bcopy((char *)wlc->pub->cur_etheraddr.octet, template, ETHER_ADDR_LEN);
wlc_write_template_ram(wlc, (T_BA_TPL_BASE + 16), (T_RAM_ACCESS_SZ * 2),
template);
}
-bool wlc_aggregatable(wlc_info_t *wlc, u8 tid)
+bool wlc_aggregatable(struct wlc_info *wlc, u8 tid)
{
return wlc->ampdu->ini_enable[tid];
}
void wlc_ampdu_shm_upd(ampdu_info_t *ampdu)
{
- wlc_info_t *wlc = ampdu->wlc;
+ struct wlc_info *wlc = ampdu->wlc;
/* Extend ucode internal watchdog timer to match larger received frames */
if ((ampdu->rx_factor & HT_PARAMS_RX_FACTOR_MASK) ==