SOC_ARCH_EXYNOS4412,
SOC_ARCH_EXYNOS5250,
SOC_ARCH_EXYNOS5260,
+ SOC_ARCH_EXYNOS5420,
SOC_ARCH_EXYNOS5420_TRIMINFO,
SOC_ARCH_EXYNOS5440,
};
-/**
- * EXYNOS TMU supported features.
- * TMU_SUPPORT_EMULATION - This features is used to set user defined
- * temperature to the TMU controller.
- * TMU_SUPPORT_MULTI_INST - This features denotes that the soc
- * has many instances of TMU.
- * TMU_SUPPORT_TRIM_RELOAD - This features shows that trimming can
- * be reloaded.
- * TMU_SUPPORT_FALLING_TRIP - This features shows that interrupt can
- * be registered for falling trips also.
- * TMU_SUPPORT_READY_STATUS - This feature tells that the TMU current
- * state(active/idle) can be checked.
- * TMU_SUPPORT_EMUL_TIME - This features allows to set next temp emulation
- * sample time.
- * TMU_SUPPORT_ADDRESS_MULTIPLE - This feature tells that the different TMU
- * sensors shares some common registers.
- * TMU_SUPPORT - macro to compare the above features with the supplied.
- */
-#define TMU_SUPPORT_EMULATION BIT(0)
-#define TMU_SUPPORT_MULTI_INST BIT(1)
-#define TMU_SUPPORT_TRIM_RELOAD BIT(2)
-#define TMU_SUPPORT_FALLING_TRIP BIT(3)
-#define TMU_SUPPORT_READY_STATUS BIT(4)
-#define TMU_SUPPORT_EMUL_TIME BIT(5)
-#define TMU_SUPPORT_ADDRESS_MULTIPLE BIT(6)
-
-#define TMU_SUPPORTS(a, b) (a->features & TMU_SUPPORT_ ## b)
-
-/**
- * struct exynos_tmu_register - register descriptors to access registers and
- * bitfields. The register validity, offsets and bitfield values may vary
- * slightly across different exynos SOC's.
- * @triminfo_data: register containing 2 pont trimming data
- * @triminfo_ctrl: trim info controller register.
- * @triminfo_ctrl_count: the number of trim info controller register.
- * @tmu_ctrl: TMU main controller register.
- * @test_mux_addr_shift: shift bits of test mux address.
- * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
- * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
- * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
- * @tmu_status: register drescribing the TMU status.
- * @tmu_cur_temp: register containing the current temperature of the TMU.
- * @threshold_temp: register containing the base threshold level.
- * @threshold_th0: Register containing first set of rising levels.
- * @threshold_th1: Register containing second set of rising levels.
- * @threshold_th2: Register containing third set of rising levels.
- * @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
- * @tmu_inten: register containing the different threshold interrupt
- enable bits.
- * @inten_rise0_shift: shift bits of rising 0 interrupt bits.
- * @inten_rise1_shift: shift bits of rising 1 interrupt bits.
- * @inten_rise2_shift: shift bits of rising 2 interrupt bits.
- * @inten_rise3_shift: shift bits of rising 3 interrupt bits.
- * @inten_fall0_shift: shift bits of falling 0 interrupt bits.
- * @tmu_intstat: Register containing the interrupt status values.
- * @tmu_intclear: Register for clearing the raised interrupt status.
- * @emul_con: TMU emulation controller register.
- * @emul_temp_shift: shift bits of emulation temperature.
- * @emul_time_shift: shift bits of emulation time.
- * @tmu_irqstatus: register to find which TMU generated interrupts.
- * @tmu_pmin: register to get/set the Pmin value.
- */
-struct exynos_tmu_registers {
- u32 triminfo_data;
-
- u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
- u32 triminfo_ctrl_count;
-
- u32 tmu_ctrl;
- u32 test_mux_addr_shift;
- u32 therm_trip_mode_shift;
- u32 therm_trip_mode_mask;
- u32 therm_trip_en_shift;
-
- u32 tmu_status;
-
- u32 tmu_cur_temp;
-
- u32 threshold_temp;
-
- u32 threshold_th0;
- u32 threshold_th1;
- u32 threshold_th2;
- u32 threshold_th3_l0_shift;
-
- u32 tmu_inten;
- u32 inten_rise0_shift;
- u32 inten_rise1_shift;
- u32 inten_rise2_shift;
- u32 inten_rise3_shift;
- u32 inten_fall0_shift;
-
- u32 tmu_intstat;
-
- u32 tmu_intclear;
-
- u32 emul_con;
- u32 emul_temp_shift;
- u32 emul_time_shift;
-
- u32 tmu_irqstatus;
- u32 tmu_pmin;
-};
-
/**
* struct exynos_tmu_platform_data
* @threshold: basic temperature for generating interrupt
* @first_point_trim: temp value of the first point trimming
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
- * @test_mux; information if SoC supports test MUX
- * @triminfo_reload: reload value to read TRIMINFO register
* @cal_type: calibration type for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
* @freq_tab_count: Count of the above table as frequency reduction may
* applicable to only some of the trigger levels.
- * @registers: Pointer to structure containing all the TMU controller registers
- * and bitfields shifts and masks.
- * @features: a bitfield value indicating the features supported in SOC like
- * emulation, multi instance etc
*
* This structure is required for configuration of exynos_tmu driver.
*/
u8 first_point_trim;
u8 second_point_trim;
u8 default_temp_offset;
- u8 test_mux;
- u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
enum calibration_type cal_type;
enum soc_type type;
struct freq_clip_table freq_tab[4];
unsigned int freq_tab_count;
- const struct exynos_tmu_registers *registers;
- unsigned int features;
};
/**
struct exynos_tmu_platform_data tmu_data[];
};
+extern struct exynos_tmu_init_data const exynos3250_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos4412_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos5260_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos5420_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
+
#endif /* _EXYNOS_TMU_H */
projects / mirror_ubuntu-zesty-kernel.git / blobdiff